DA-520A Bi-directional RF amp The Model DA-520A Bi-directional RF Amplifier provides 20 dB of gain in a CATV or antenna system. The Model DA-520A has bi-directional capabilities with a 5-40 MHz bandwidth return path. This allows compatibility with interactive CATV set top boxes. A 12 VDC Model 999-017-01 power supply is included. Features 54 MHz to 1 GHz forward bandwidth 5 MHz to 40 MHz reverse bandwidth ±1.5 dB gain flatness Maximum input level 30 dBmv 3.5" W x 1.2" H x 2.5" D

	2512/2514/2532/2532/2538: Splitters & Combiners The ChannelPlus bi-directional 2-way, 4-way and 8-way splitter/combiners provide a 1 GHz bandwidth and are ideal for antenna and coaxial cable operations. The splitter/combiner is one product that can be used for two applications. It can be used to split a signal from a source or combine signals from multiple sources onto one coax run. Use DC passing splitter when using IR on the coax. The 2512 and 2514 are DC passing.
	DMD-16 Data Distribution Module The Model DMD-16 Data Distribution Module provides a superior way to terminate data connections. Each unit has 16 un-bridged 110 punch down termination points that are aligned with a corresponding RJ-45 connector. Rated for Cat-5e performance in data networks, the Model DMD-16 is an excellent data termination hub for use with an Ethernet hub for LAN networks. The Model DMD-16 can also be used as a termination point for control signals over Cat-5, video and audio signals, home control signals, security camera video and KSU and PBX phone systems. Features Cat-5e certified Un-bridged termination hub 16 data locations Labeling system 13" W x 4.5" H x 1.6" D
	DMT-16 Telephone Distribution Module The Model DMT-16 Telephone Distribution Module with Surge Protection will accept four incoming telephone lines and distribute them to 16 locations with 110 punch-down connectors. It is made of brushed aluminum and can be easily mounted into the Linear rack-mounted grid system (Model 2619). Each unit comes with integrated surge suppression, a master disconnect, and a RJ-31X connection for alarm systems. Additional features include individual line LED indicators for surge events and an easy labeling system for integrated wire management and location identification. Features Four phone lines 16 locations (110 punch down connectors) Four line surge protection RJ-31X security interface Test and expansion jacks Integrated labeling system Stand-off design for built-in wire management 13" W x 4.5" H x 1.6" D
	DMT-24 Telephone Distribution Module The Model DMT-24 Telephone Distribution Module with Surge Protection will accept four incoming telephone lines and distribute them to 24 locations with RJ-45 outputs. It is made of brushed aluminum and can be easily mounted into the Linear rack-mounted grid system (Model 2619). Each unit comes with integrated surge suppression, a master disconnect, and an RJ-31X connection for alarm systems. Additional features include individual line LED indicators for surge events and an easy labeling system for integrated wire management and location identification. Features Four phone lines 24 locations (RJ-45 connectors) 4 line surge protection RJ-31X security interface Test and expansion jacks Integrated labeling system Stand-off design for built-in wire management 13" W x 4.5" H x 1.6" D