Audio Amplifiers

21 Item(s)

Grid List

ATLAS 120 Watt 6 Input Mixer Amplifier, AA120

$499.00
120 Watt 6 Channel Mixer Amplifier 5 Mic/Line Inputs with Phantom Power and 1 Stereo Summing AUX Input Bridge In/Out Circuit with Balanced Link / Internal Relay to Engage Circuit is Perfect for Small Room Combining Systems Eliminating the Need for External Electronics Pre Out / Power Amp In for Patching External Processors Remote or VOX Mute Capabilities Zone 2 MOH Out from CH6 Line Source

SPECO 60W RMS P.A. Mixer Amplifier, PMM60A

MAP price: $846.00 ? Please add this item to the cart to view the price

RMS Output Power: 60 Watt Speaker Ouput: 4/8/16 Ohms, 70/25V Inputs: 3 x Mic (XLR), 1 x Mic (XLR or Terminal) 3 x Mic/Aux (Terminal or Stereo RCA), 1 x EQ/Mix (RCA) 1 x TEL (Terminal)

SPECO PA AMP 15W, PVL15A

MAP price: $224.80 ? Please add this item to the cart to view the price

RMS Output Power: 15W  Max. Output Power: 30W  Power Supply: AC 120V, 50/60Hz  Speaker Outputs: 4/8/16 Ohms, 70/25V  Inputs: 2 x Mic (1/4" and 1/4" or XLR) 1 x Aux (1/4") Frequency Response: 50Hz ~ 15KHz 50Hz ~ 15KHz Dimensions: 8.25" (W) x 3" (H) x 7.9" (D)  

RUSSOUND Two-Channel Dual Source Amplifier 75 Watt, P75

$129.00
Crosstalk: > 70dB @ 1 kHz Frequency Response: 10Hz to 30kHz +0.0dB/- 3.0dB @ 8 ohms, 1 W Input Sensitivity: 900mV for 50W at 8 ohms Power Output: 60W per channel at 8 ohms Power Requirement(s): 120VAC 60Hz 4.2A Signal to Noise Ratio: 100dB A-weighted

ATLAS 4-Input, 50-Watt Mixer/ Amplifier with Automatic System Test (PHD), AA50PHD

$299.00
50W into 25V/70.7V and 4Ω Loads Rear Mounted DIP Switch Allows Mute Receive for Inputs 2 and 3 Contact Closure Mute Terminals Variable Mute Sensitivity Control for Input 1 Preamp In for External Processors Line Output Remote Input Select (RIS) Remote Level Control Input Assignable Zone 2 Output Two Unbalanced, Summing Line Level Inputs Balanced Mic/Line/Tel Input w/ Phantom Power Automated Diagnostic System Test (Push Here Diagnostic®)

ATLAS 40 Watt 3 Input Mixer Amplifier, MA40G

$199.00
One Balanced Mic/Line/Tel Input w/Phantom Power 2 Unbalanced, Summing Line Level Inputs Variable VOX Mute Sensitivity Control for Input 1 Contact Closure Mute Terminals Global Power Supply, 100VAC-240VAC ~ 50/60Hz Compact 1RU, 1/2 Rack

ATLAS 60 Watt 3 Input Mixer Amplifier, MA60G

$299.00
One Balanced Mic/Line/Tel Input w/Phantom Power 2 Unbalanced, Summing Line Level Inputs Variable VOX Mute Sensitivity Control for Input 1 Contact Closure Mute Terminals Global Power Supply, 100VAC-240VAC ~ 50/60Hz Compact 1RU, 1/2 Rack

SPECO 20 Watt 12vdc Mobile Amplifier with Mic, PAT20TB

MAP price: $217.50 ? Please add this item to the cart to view the price

Talk-back feature turns a remote speaker (not included) into a listening device for two-way conversations Includes push to talk handheld CB style microphone Includes mounting hardware RMS Output Power: 12W/Max. Output Power...22W Power Supply: DC 11V to 16V Speaker Outputs: 4/8 Ohms Inputs:1 x Mic (1/4"), 1 x Aux (1/4") Dimensions:5.1" (W) x 1.25" (H) x 4.5" (D) Includes Microphone

PHILMORE AC/DC PA Amplifier, PA503

$149.00
Operates on 12VDC or 117VAC 50-60Hz Convenient Mike Input on Rear and Front Panel  Ideally suited for both crisp and clean sound whether using amplifier for voice or music.  Includes sturdy Adjustable Mounting Bracket  Size: 10-3/4" W x 6-3/8" D x 2-3/4" H (Less Feet) Power Output: 30 watts RMS @ 2% THO Frequency Response: 50 - 18,000 Hz Line Outputs: 25 volts & 70 volts Output Impedance: 4-8-16 ohms Power Requirements: 12VDC and / or 117VAC 50-60Hz

PHILMORE Mini Amplifier, PA305

$49.90
Power per channel: 20 watts RMS x 2 (into 8-ohm speakers from 20 to 20,000 Hz with 0.2 percent THD) 40 watts RMS x 1 (into 8-ohm speakers from 20 to 20,000 Hz with 0.2 percent Audio inputs: one 3.5mm input and one stereo analog (left/right) RCA input Audio outputs: left/right speaker - level outputs Speaker terminals: Push Button  Size: 4-3/4" x 2-1/2" x 1-1/2"

ATLAS 35 Watt 3 Input Mixer Amplifier, AA35

$199.00
1 Mic In w/Phantom Power 2 Stereo Line Inputs 35 Watts of True Output Power Dual Line Outputs Pre Out/ Power In Patch Remote and VOX Activated Mute Route Any Source Combination or Entire Mix Bus to Zone 2 (MOH Out)

ATLAS 60 Watt 3 Input Mixer Amplifier, AA60

$299.00
1 Mic In w/Phantom Power 2 Stereo Line Inputs Dual Line Outputs Pre Out/ Power In Patch Remote and VOX Activated Mute Route Any Source Combination or Entire Mix Bus to Zone 2 (MOH Out)

QSC CMX300Va Commercial Power Amp, CMX-300VA

$480.00
200W per channel at 8 ohm / 600W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC CMX500Va Commercial Power Amp, CMX-500VA

$620.00
300W per channel at 8 ohm / 1200W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC AMP 500W/CH 70V-2000W MONO, CMX-800VA

$870.00
500W per channel at 8 ohm / 2000W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC GX3 Power Amp, GX-3

$299.99
300W at 8 ohms / 1 kHz per channel (both channels driven) Power levels matched to the most popular speakers used by entertainers Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source Outputs: Speakon combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks Detented gain controls for precise setting and matching of sensitivity GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show Front panel LEDs monitor power, signal, and clipping Subwoofer/satellite crossover built-in

QSC GX5 Power Amp, GX-5

$399.99
500W at 8 ohms / 1 kHz per channel (both channels driven) Power levels matched to the most popular speakers used by entertainers Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source Outputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks Detented gain controls for precise setting and matching of sensitivity GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show Front panel LEDs monitor power, signal and clipping Subwoofer/satellite crossover built-in

QSC GX7 Power Amp, GX-7

$599.00
725W at 8 ohms / 1 kHz per channel (both channels driven) Power levels matched to the most popular speakers used by entertainers Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source Outputs: Speakon combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks Detented gain controls for precise setting and matching of sensitivity GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show Front panel LEDs monitor power, signal, and clipping Subwoofer/satellite crossover built-in

ATLAS 35 Watt 3 Input Mixer Amplifier, AA35G

$229.00
FREQUENCY RESPONSE: 50Hz - 20kHz CONNECTOR TYPE: Phoenix and RCA OUTPUT POWER: 35 Watts RACK UNITS: 2 high 1/2 wide HEIGHT: 4.1" (104mm) Including Feet WIDTH: 9.5" (241mm) DEPTH: 13.9" (353mm) Front of Knobs to Back Panel