Public Address Equipment

Items 1 to 10 of 36 total

Grid List

ATLAS 120 Watt 6 Input Mixer Amplifier, AA120

$499.00
120 Watt 6 Channel Mixer Amplifier 5 Mic/Line Inputs with Phantom Power and 1 Stereo Summing AUX Input Bridge In/Out Circuit with Balanced Link / Internal Relay to Engage Circuit is Perfect for Small Room Combining Systems Eliminating the Need for External Electronics Pre Out / Power Amp In for Patching External Processors Remote or VOX Mute Capabilities Zone 2 MOH Out from CH6 Line Source

QSC CMX500Va Commercial Power Amp, CMX-500VA

$820.00
300W per channel at 8 ohm / 1200W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC CMX800Va Commercial Power Amp, CMX-800VA

$1,020.00
500W per channel at 8 ohm / 2000W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

ATLAS 40 Watt 3 Input Mixer Amplifier, MA40G

$199.00
One Balanced Mic/Line/Tel Input w/Phantom Power 2 Unbalanced, Summing Line Level Inputs Variable VOX Mute Sensitivity Control for Input 1 Contact Closure Mute Terminals Global Power Supply, 100VAC-240VAC ~ 50/60Hz Compact 1RU, 1/2 Rack

ATLAS 60 Watt 3 Input Mixer Amplifier, MA60G

$299.00
One Balanced Mic/Line/Tel Input w/Phantom Power 2 Unbalanced, Summing Line Level Inputs Variable VOX Mute Sensitivity Control for Input 1 Contact Closure Mute Terminals Global Power Supply, 100VAC-240VAC ~ 50/60Hz Compact 1RU, 1/2 Rack

PHILMORE AC/DC PA Amplifier, PA503

$149.00
Operates on 12VDC or 117VAC 50-60Hz Convenient Mike Input on Rear and Front Panel  Ideally suited for both crisp and clean sound whether using amplifier for voice or music.  Includes sturdy Adjustable Mounting Bracket  Size: 10-3/4" W x 6-3/8" D x 2-3/4" H (Less Feet) Power Output: 30 watts RMS @ 2% THO Frequency Response: 50 - 18,000 Hz Line Outputs: 25 volts & 70 volts Output Impedance: 4-8-16 ohms Power Requirements: 12VDC and / or 117VAC 50-60Hz

SPECO 20 Watt 12vdc Mobile Amplifier with Mic, PAT20TB

$89.90
Talk-back feature turns a remote speaker (not included) into a listening device for two-way conversations Includes push to talk handheld CB style microphone Includes mounting hardware RMS Output Power: 12W/Max. Output Power...22W Power Supply: DC 11V to 16V Speaker Outputs: 4/8 Ohms Inputs:1 x Mic (1/4"), 1 x Aux (1/4") Dimensions:5.1" (W) x 1.25" (H) x 4.5" (D) Includes Microphone

SPECO 60W RMS P.A. Mixer Amplifier, PMM60A

$329.00
RMS Output Power: 60 Watt Speaker Ouput: 4/8/16 Ohms, 70/25V Inputs: 3 x Mic (XLR), 1 x Mic (XLR or Terminal) 3 x Mic/Aux (Terminal or Stereo RCA), 1 x EQ/Mix (RCA) 1 x TEL (Terminal)

SPECO PA AMP 15W, PVL15A

$99.00
RMS Output Power: 15W  Max. Output Power: 30W  Power Supply: AC 120V, 50/60Hz  Speaker Outputs: 4/8/16 Ohms, 70/25V  Inputs: 2 x Mic (1/4" and 1/4" or XLR) 1 x Aux (1/4") Frequency Response: 50Hz ~ 15KHz 50Hz ~ 15KHz Dimensions: 8.25" (W) x 3" (H) x 7.9" (D)  

QSC CMX300Va Commercial Power Amp, CMX-300VA

$585.00
200W per channel at 8 ohm / 600W at 70 volt bridged mono 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block Rack mountable with chassis less than 16" (40.6 mm) deep 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings Tamper-proof security cover for gain controls Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool