Chemicals & Adhesives

When you think of chemicals for electronics, think of "You-do-it" Electronics Center. Cleaners, lubricants, dusters, freeze sprays, coatings, solvents, shielding and more. If you don't see what you're looking for, call or email us.

Items 1 to 36 of 144 total

Grid List

MG Chemicals Thermal Conductive Epoxy 6ml, 8329TCM-6ML

$10.95
  • Excellent 1.36 W/(mK) thermal conductivity
  • Easy 1:1 mix ratio
  • Adheres to most electronic substrates
  • Stores and ships at slightly below room temperature no freezing or dry ice required
  • Very long shelf life of at least two years even when stored at room temperature
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

MG Chemicals Sn63 / Pb37 Leaded Solder .062, 4888-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn63 / Pb37 Leaded Solder .05, 4887-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn63 / Pb37 Leaded Solder .04, 4886-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn63 / Pb37 Leaded Solder .032, 4885-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn63 / Pb37 Leaded Solder .025, 4884-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

3M Indoor Mounting Tape 1" x 50", 114DC

$3.90
  • Double Sided Tape Works on most indoor surfaces that are clean, dry and smooth
  • Tape holds up to 5lbs. One inch holds a quarter pound, four inches hold one pound
  • Made in USA with U.S. and globally sourced materials

3M VHB Mounting Tape 3/4" x 15yds, 5952 3M

$39.90
  • Eliminate drilling, grinding, refinishing, screwing, welding and clean-up
  • Creates a permanent seal against water, moisture and more by offering better gap filling capabilities
  • Pressure sensitive adhesive bonds on contact to provide immediate handling strength
  • Allows the use of thinner, lighter weight and dissimilar materials

MG Chemicals Sn63 / Pb37 Leaded Solder .032, 4880-18G

$3.50
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F
New MG Chemicals RA Rosin Flux Paste

MG Chemicals RA Rosin Flux Paste, 8342-50G

$7.95
  • Works well with Leaded or Lead free solders
  • Solder touch up
  • Surface mount assemblies rework or repair
  • Can be applied by dipping or brush / cotton swab spreading
  • Uses Premium Grade RA Flux
  • Excellent wettability
  • High tack force
  • Long tack time
  • Zinc Chloride or Ammonium Chloride FREE
  • Residue can easily be removed with Cat. #824 Isopropyl Alcohol or Cat. #4140 Flux Remover
  • Complies with IPC ANSI-J-STD-004 ROH1
  • RoHS compliant

MG Chemicals Sn60 / Pb40 Leaded Solder .032, 4890-18G

$3.50
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn60 / Pb40 Leaded Solder .025, 4894-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn60 / Pb40 Leaded Solder .032, 4895-227G

$18.95
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Thermal Conductive Epoxy 6ml, 8329TCS-6ML

$10.95
  • Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
  • Excellent 1.44 W/(mK) thermal conductivity
  • Easy 1:1 mix ratio
  • Adheres to most electronic substrates
  • Stores and ships at slightly below room temperature no freezing or dry ice required
  • Very long shelf life of at least three years even when stored at room temperature
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

MG Chemicals Silver Conductive Epoxy 15 grams, 8331-14G

$45.95
  • Good 0.017 Ocm electrical resistivity and 0.90 W/(mK) thermal conductivity
  • Adheres to most electronic substrates
  • Stores and ships at room temperatureno freezing or dry ice required
  • Very long shelf life of at least two yearseven when stored at room temperature
  • Easy 1:1 mix ratio
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

MG Chemicals Silver Conductive Epoxy 15 grams, 8331S-15G

$49.25
  • 4 Hr. Working Time / High Conductivity
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
  • Excellent adhesion to most electronic substrates

MG Chemicals No Clean Flux Paste in Syringe, 8341-10ML

$10.95
  • Excellent wettability
  • No clean
  • Non-conductive, Non- tacky residues
  • Compatible with Lead free & Leaded Solder Systems
  • Thixotropic paste
  • RoHS compliant

MG Chemicals Liquid Rosin Flux, 835-100ML

$9.65
  • For leaded and lead free soldering
  • Fully activated
  • Offers superior fluxing ability
  • Instant wetting
  • RoHS Compliant

MG Chemicals Rosin Flux Pen, 835-P

$7.95
  • Fast wetting
  • Non-corrosive
  • Non-hygroscopic
  • Halide free
  • RoHS compliant
  • Controlled application

MG Chemicals Sn60 / Pb40 Leaded Solder .062, 4898-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn60 / Pb40 Leaded Solder .05, 4897-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Sn60 / Pb40 Leaded Solder .04, 4896-227G

$17.90
  • RA Flux Core Solder
  • Meets J-STD-004 / J-STD-006
  • Non-corrosive and electrically non-conductive flux residue
  • Standard Flux Core percentage at 2.2%
  • Solder Melting Point: 183C / 361F

MG Chemicals Transparency Film 5 Sheets, 416-T

$8.75
  • 8" x 11" heat stabilized film sheets
  • For use in most laser printers

MG Chemicals Rub-On Etch Resist, 416-ER

$9.95
  • Perfect finish every time
  • Sharp edges
  • No printing or exposure required

MG Chemicals Etching Tank, 416-ES

$55.00
  • Etch copper clad circuits professionally
  • Accommodates two 8"x 9" double sided CCB's
  • Ideal for students and hobbyists

MG Chemicals Flux Remover 1 Liter, 4140-1L

$19.95
  • Moderate evaporation
  • Highly flammable
  • Low odor
  • Zero residue