Coatings & Solvents

Keep electronics clean and in peak working order with cleaning solvents for electronics from “You-Do-It” Electronics Center. Prevent slow running computers and burned out circuit boards with safe and effective cleaning. Find high purity electronic grade solvents for cleaning electronic components and printed circuit boards. Select cleaning solvents developed to dispense with dry contaminants such as dirt and dust and wet contaminants like grime, waxy oil and flux. Learn to match the electronics cleaning products to the equipment you wish to clean from the expert staff at “You-Do-It” Electronics Center
22 Item(s)

Grid List

MG Chemicals Acrylic Conformal Coating 55ml, 419C-55ML

$12.45
Super fast cure reduces production and maintenance bottlenecks. No Hazardous Air Pollutants free of toluene and xylene Externally Qualified to IPC-CC-830B by Pacific Testing Laboratories, Inc. UL Recognized for Flame Class 94 V-0 (E203094) Excellent finish smooth, homogeneous, and durable crystal clear coat Protects electronics from moisture, corrosion, fungus, and static discharges Easy to inspect fluoresces under UV (UV-A blacklight)

MG Chemicals Acetone 945ml, 434-1L

$9.95
Enhances Adhesion to the Print Bed for 3D Printing Smooth Finishing of 3D Printed Pieces Highly Miscible with Other Common Organic Solvents Fast Evaporation Rate VOC Exempt

MG CHEMICALS Carbon Conductive Pen, 838AR-P

$10.45
Volume resistivity: =0.5 'cm Creates durable, reliable, conductive connections Typical trace width: 1.0 mm Dries in minutes at room temperature Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic  substrates Adheres well to ABS, PLA, and other 3D printing plastics Superior corrosion resistance Mild solvent system, safe on polystyrenes Toluene and xylene free 10ml size

MG CHEMICALS Nickel Conductive Pen, 841AR-P

$11.45
Low volume resistivity of 0.0068 'cm Creates durable, reliable, highly conductive connections Typical trace width: 1.0 mm Dries in minutes at room temperature Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic  substrates Adheres well to ABS, PLA, and other 3D printing plastics Good corrosion resistance Mild solvent system, safe on polystyrenes Toluene and xylene free  10ml size

MG CHEMICALS Silver Conductive Pen, 842AR-P

$29.95
Volume resistivity: =0.5 'cm Creates durable, reliable, conductive connections Typical trace width: 1.0 mm Dries in minutes at room temperature Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic  substrates Adheres well to ABS, PLA, and other 3D printing plastics Superior corrosion resistance 10ml size Mild solvent system, safe on polystyrenes Toluene and xylene free 10ml size

MG CHEMICALS Acrylic Conformal Coating (fast dry), 419C-340G

$18.95
certified UL 94V-0 (File # E203094) Externally Qualified to IPC-CC-830B by Pacific Testing Laboratories Super fast cure—tack free in about 3 min; full cure in < 30 min at 65 °C [149 °F] East to use and apply, available in liquid and aerosol Protects electronics from moisture, corrosion, fungus, and static discharges No Hazardous Air Pollutants—free of toluene and xylene Low VOC content Easy to inspect—fluoresces under UV light Service temperature range -40°C to +125°C Easy rework and repairs—can solder through Removable with Cat. No. 8310 (gel) or 8312 (liquid) Conformal Coating Stripper

MG CHEMICALS Silicone Conformal Coating, 422B-340G

$20.95
12 ounce aerosol Certified UL 94V-0 (File # E203094) Fast cure—tack free in 6 min at room temperature, full cure in 20 min at 65 °C Extremely flexible Service temperature range -40°C to +200°C Suitable for robotic spray equipment, custom formulations available for specific machines Easy to inspect: fluoresces blue at 437 nm ± 65 nm under UVA light Extended Shelf Life avoids worries about premature hardening and wastage associated with typical silicones Easy rework and repairs—can solder through Removable with Cat. No. 8310 (gel) or 8312 (liquid) Conformal Coating Stripper Used in spray equipment – Nordson and PVA Better temperature resistance that a typical acrylic (150 – 160)

MG CHEMICALS Total Ground Carbon Conductive Coating, 838-340G

$21.95
12 ounce aerosol Create your own static-free work station High Conductivity—Low Surface resistivity of 250 Ω/sq for one coat (1 mil) Tough and durable coating Carbon does not rub off Stronger adhesion than water based coatings Low VOC’s

MG CHEMICALS Super Shield Nickel Conductive Coating, 841-340G

$36.95
12 ounce aerosol UL Recognized (File # E202609) Tested in compliance with IEEE Std. 299-1997 High Conductivity Tough and durable coating Stronger adhesion than water based coatings Low VOC’s Median attenuation 50 dB ±25 dB per 38 μm (~1.5 mil) for frequency range of 10 to 18,000 MHz

MG Chemicals Silicone Modified Coating 55ml, 422B-55ML

$12.95
Fast Cure - tack free in 6 min at room temperature, full cure in 20 min at 65 C Protects electronics from moisture, corrosion, fungus, thermal shock, and static discharges Easy to inspect: fluoresces blue at 437 nm 65 cm under UVA light

MG Chemicals Connector Coating 55ml, 4229-55ML

$16.95
Seals, insulates and protects exposed wires, metal, and plastic Forms a strong, pliable moisture resistant bond Will not crack 

MG Chemicals Overcoat Pen Black 5ml, 419D-P-BK

$12.90
No Hazardous Air Pollutantsfree of toluene or xylene Excellent finishsmooth, homogeneous, and durable Protects electronics from moisture, corrosion, fungus, and static discharges Easy rework and repairsremovable with Cat. No. 435, 4352 thinner or Cat. No. 8310 stripper  

MG Chemicals Overcoat Pen Blue 5ml, 419D-P-BL

$12.90
No Hazardous Air Pollutantsfree of toluene or xylene Excellent finishsmooth, homogeneous, and durable Protects electronics from moisture, corrosion, fungus, and static discharges Easy rework and repairsremovable with Cat. No. 435, 4352 thinner or Cat. No. 8310 stripper  

MG Chemicals Overcoat Pen Clear 5ml, 419D-P-CL

$12.90
No Hazardous Air Pollutantsfree of toluene or xylene Excellent finishsmooth, homogeneous, and durable Protects electronics from moisture, corrosion, fungus, and static discharges Easy rework and repairsremovable with Cat. No. 435, 4352 thinner or Cat. No. 8310 stripper  

MG Chemicals Overcoat Pen Green 5ml, 419D-P-GR

$12.90
No Hazardous Air Pollutantsfree of toluene or xylene Excellent finishsmooth, homogeneous, and durable Protects electronics from moisture, corrosion, fungus, and static discharges Easy rework and repairsremovable with Cat. No. 435, 4352 thinner or Cat. No. 8310 stripper  

MG Chemicals Overcoat Pen White 5ml, 419D-P-WH

$12.90
No Hazardous Air Pollutantsfree of toluene or xylene Excellent finishsmooth, homogeneous, and durable Protects electronics from moisture, corrosion, fungus, and static discharges Easy rework and repairsremovable with Cat. No. 435, 4352 thinner or Cat. No. 8310 stripper  

MG Chemicals Liquid Tin 125ml, 421-125ML

$14.95
Provides excellent solderability Protects against oxidation No mixing or dilution required For commercial/industrial use only 3600 square inches per half litre

MG Chemicals Urethane Coating 55ml, 4223-55ML

$12.45
Excellent chemical resistance Oil and moisture resistant Excellent for coating circuit boards UV indicator for quality inspection Superior abrasion resistance Excellent adhesion Good flexibility

MG Chemicals Super Corona Dope 55ml, 4226-55ML

$9.95
Protects motor windings and coils from arcing and discharge Protects against moisture and oxidation

MG CHEMICALS Premium Acrylic Conformal Coating, 419D-340G

$19.95
Applications: Printed Circuit boards LED Boards Electric generators, motors and transformers Relays Automotive air bag controllers Cell phones and Computer tablets components Avionics