To Visit 3M* Click the link below
This is only one of Hundreds of 3M Products Which Are Available!
If you don't see what you are looking for please Call:
781-449-1005
Or
E-mail:
*The link above will take you from the "You-do-it" Electronics Website. You may encounter Sites which use cookies. Please use these links @ your own risk. Although every effort has been made to check the content of the sites above,"You-do-it" Electronics cannot be responsible for content contained in the websites which are linked above.
|
"You-do-it" Electronics Center ® | home|
3M Connectors
|
|
3M™ Scotchlok™ T-Tap Nylon Insulated Self-Stripping Female QuickSlide Disconnect 951X, 22-18 AWG
Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250 inch (6.35 millimeter) male tab, making a reusable quick-connect wiring termination. T-tap disconnect. Maximum insulation O.D.diameter of 0.150 inches (3,81 mm) and a operating temperature of 221°F (105°C). The suggested application tool for this connector is the E-9BM Crimping Tool with a mate of 0.250 inch male tab MNG10-250 DMI.
|
|
|
3M™ Scotchlok™ T-Tap Nylon Insulated Self-Stripping Female QuickSlide Disconnect 952X, 18-14 AWG
Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250 inch (6.35 millimeter) male tab, making a reusable quick-connect wiring termination. T-tap disconnect. Maximum insulation O.D.diameter of 0.150 inches (3,81 mm) and a operating temperature of 221°F (105°C). The suggested application tool for this connector is the E-9BM Crimping Tool with a mate of 0.250 inch male tab MNG10-250 DMI.
|
|
|
3M™ Scotchlok™ T-Tap Nylon Insulated Self-Stripping Female QuickSlide Disconnect 953X, 22-18 AWG
Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .250 inch (6.35 millimeter) male tab, making a reusable quick-connect wiring termination. T-tap disconnect. Maximum insulation O.D.diameter of 0.150 inches (3,81 mm) and a operating temperature of 221°F (105°C). The suggested application tool for this connector is the E-9BM Crimping Tool with a mate of 0.250 inch male tab MNG10-250 DMI.
|
|
|
3M™ Scotchlok™ IDC Communications Connectors UG
3M™ Scotchlok™ IDC Communications Connectors are used for tap splicing voice and data communication cables with solid copper single-conductor wires.
|
|
|
3M™ Electrical Spring Connector 412-Box Tan (100/box)
The 3M™ Electrical Spring Connector 412 will electrically connect copper conductors in a pigtail application. This Hex-Head Connector is capable of a 1 conductor termination or a 2 or more conductor connection in a pigtail application.
|
|
|
3M™ Scotchlok™ 316IR Electrical IDC, Pigtail, Irrigation Applications
Electrically connects two or three wire ends, insulates the connection, provides a moisture resistant seal and has an AWG range 22-16 (0,5-1,5). Recommended for use with low energy underground circuit wires.
|
|
|
3M™ Wire Connectors T/R+ (BOX)
|
The new Super Tan 3M™ Wire Connector T/R+ (Miniskirt) is 3M’s latest solution to the requests gathered from our customers in the field. The T/R+ is designed to replace the yellow, tan and red connectors in the majority of all field applications.
|
|
|
|
3M™ Wire Connector T/Y+ (BOX)
The 3M™ T/Y+ wire connector is 3M’s latest solution to meet the needs of today’s electrical contractors. Very small and able to fit into tight spaces, the T/Y+ has an incredibly broad wire range accommodating from two #22 awg copper wires to three #12 awg solid copper wires. A flexible skirt provides protection from over stripped wires.
|
|