Tell-All Indicator

Part Number: TP100

Identifies telephone and data lines Identifies 10-Bast-T, Token Ring, 100Mbit Systems Includes built-in battery Detects voltage and polarity

Resi-TesterTM

Whole-House Cable Tester

Part Number: TP300

Resi-TesterTM (TP300) is the first identifier and verification tester designed exclusively for all the wiring environments found in Home Networking and Home Automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-TesterTM and optional room identifier sets. Multiple input ports and included adapter cables mean any wire can be attached and tested! Resi-TesterTM displays cabling results using a large easy to read LCD with clear concise information showing all the faults connected with the various cable types. It warns of voltage on lines and shows a Pass or Fail message after each test. The built-in tone generator sends a signal down installed wires, so that they can be traced in the walls and their exact terminus identified. The built-in remote will identify individual outlets whether they are phone, cable or data network. Using the optional multi-identifier sets, the user can verify connections on up to 20 coax outlets and 20 paired cables simultaneously for wire-mapping the largest jobs easily and efficiently.

TestifierTM

All Cable Tester
Part Number: TP350
Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs, PASS and FAIL results fast - on a clear, full alpha/numeric LCD display. Location: Testifier is supported by the most comprehensive set of wiremapping locators in the world. Up to 20 cable end locations at a time can be identified and tagged. Position: Testifier's built-in tone generator is the most flexible and function-packed tone generator you will ever use. Its configurable signal can be generated to find and fix the position on any type of cable - either exposed or hidden, in ceilings or behind walls. TestifierTM represents the best of 21st century testing technology.

LanRoverTM

Tester/Analyzer

Part Number: TP500

Offers a new price/performance level for verification of wiring faults and configurations on all your data cable Cable test results displayed on main unit and remote unit, in less than 2 seconds after plugging in the cable Auto-on and auto-off when testing cables, just plug both ends into tester! Snap-together case for easy storage and convenient patch cable testing Tone generator mode for use with tone tracers, auto-off Debug mode with from/to and failures for each pair Test for short, opens, miswires, reversals and split pairs Battery low indicator

LanRoverPROTM

Tester/Analyzer

Part Number: TP600

This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length Measures cable length as a stand-alone function Test for short, opens, miswires, reversals and split pairs Identifies multiple faults clearly without interpretation Clear wiremapping form displayed in 2-line, 16-character LCD display Auto-off/Auto-on. Up to 10 times better battery life than other testers One-ended testing with Pre-test mode for fast results Built-in tone generator with selectable tones and pair capability

LanScaperTM Network Tester

Part Number: NT700

The new LanScaperTM Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaperTM combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network. Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices. Pinging function verifies connectivity to network devices and queries PC/NIC's. Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing Conducts link tests to ID speed Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result Automatically accesses DHCP host and obtains network information Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals Identifies HUBs, NIC, or auto MDI/MDI-X devices Blinks HUBs to ascertain connected configuration Displays advertised network speed/duplex Measures and reports any voltage on lines Wiremaps network connections with remote identifiers Generates multiple tone levels for signal tracing and cable identification

LanScaperTM Network Testing Kit

Part Number: NT750

The new LanScaperTM Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaperTM combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network. Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices. Pinging function verifies connectivity to network devices and queries PC/NIC's. Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing Conducts link tests to ID speed Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result Automatically accesses DHCP host and obtains network information Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals Identifies HUBs, NIC, or auto MDI/MDI-X devices Blinks HUBs to ascertain connected configuration Displays advertised network speed/duplex Measures and reports any voltage on lines Wiremaps network connections with remote identifiers Generates multiple tone levels for signal tracing and cable identification

Wi-Net Window

Wireless Tester
Part Number: WP150
Test-Um’s first entry into the new world of wireless and it’s a beauty!! The Wi-Net Window tool will help installers and owners of wireless networks identify, clarify, and configure all the wireless transmission equipment on a site. It will help prevent conflicts of internet access over wireless points and give a clear picture of the range and availability of each wireless access point. No other product in this class offers more information so clearly and easily displayed. The WP150 Wi-Net Window Network Wireless Analyzer shows a wide range of critically important information connected with wireless equipment regarding their identity, functionality, and capability. A full Alpha/Numeric LCD display shows all the information in a concise and clear manner for ease of use. Easy to use navigation buttons and screen prompts makes the Wi-Net Window simple to use in any application. The lightweight, handheld unit identifies wireless signal characteristics for proper configuration and installation. Signal strength shown as both a percentage on the LCD and a light bar up to 100% Equipment name and channel of transmission identified Picks up all IEEE 802.11 wireless type signals, a, b and g Lists and logs all received wireless transmissions in the area for review with constant scanning Displays encryption condition on each wireless component Lists signal as either an access point or an ad-hoc or Twin network type. Ping function accesses IP addresses and determines an internet link condition Negotiates with network DHCP for component identification and IP/MAC addresses Wi-Net Window, WP150, works on 4 alkaline or rechargeable batteries (not provided).

LanRoverPROTM

Kit with 8 remote identifiers

Part Number: TP607

This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length Measures cable length as a stand-alone function Test for short, opens, miswires, reversals and split pairs Identifies multiple faults clearly without interpretation Clear wiremapping form displayed in 2-line, 16-character LCD display Auto-off/Auto-on. Up to 10 times better battery life than other testers One-ended testing with Pre-test mode for fast results Built-in tone generator with selectable tones and pair capability