Because our price on this item is lower than the manufacturer's
suggested retail price , the manufacturer does not allow us to show
you our price until you place the item in your shopping cart.
Adding this item won't require you to purchase the product. You
can easily remove the product from your cart if you decide not to buy it.
QUALITY & SIZE
At under 10 inches tall and under 6 inches wide, print with the same, high-quality as the K8400 at a fraction of the size. Use 1.75 mm PLA or ABS filament to create professional quality 3D prints right from your desk.
MAGNETIC REMOVEABLE BED PLATE
The metal Nano bed plate magnetically attaches to the bed holder. After a print is completed, detach the bed plate for easy print removal.
BED LEVELING MEMORY
Manually set your bed leveling settings and save them to the K8600's memory.
Hotend isolator guides have upgraded from the K8400's plastic model to a new metal version. A fan is also attached to the hotend isolator to assist in temperature control.
PEACE AND QUIET PRINTING
Print your prototypes and projects in near silence with a low operating noise level of 45 dBA.
print technology: Fused Filament Fabrication (FFF - FDM)
layer resolution: standard 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm)
large build volume: 200 mm build platform diameter (0/- 5 mm), 225 mm build height (0/+75 mm) (depends on object diameter)
print speed: 20-50 mm/s (can go up to 75 mm/s)
travel speed: 180-200 mm/s
build plate surface: removable layer of BuildTak™ (K8800-BT)
filament diameter: 1.75 mm (accepts all filament spools with a mounting hole = 53 mm) - open filament policy
prints: PLA, ABS, TPU, PET and others
nozzle: E3D compatible
nozzle diameter: 0.35 mm (one nozzle supplied)
maximum nozzle operating temperature: 295°C
bed compensation: automatic bed compensation performed by the nozzle (no manual calibration needed)
calibration: automatic first-time set-up calibration
couplers: backlash free magnetic effector-couplers
advanced safety features: auto shutdown when print head detaches or temperature is incorrect (most unlikely)
filament run out detector: automatic pause and reload when printer runs out of filament
change filament function while printing: this means that you can print objects with multiple filaments/colours
effective pause function: pause your print job without nozzle leakage
end stops: infrared based end stops
firmware: modified Open Source Marlin 3D Printer, firmware is user upgradable
software: custom Repetier version (Windows) - Cura profiles (Mac)
dimensions: W 35 x D 35 x H 77 cm (without filament spool)
frame: rigid aluminium extrusion risers and 4 mm aluminium top and bottom plates for a sturdy frame and precision ground 100 mm vertical rods and brass bushings
fully Open-Source (hard- and software)
weight: 10 kg
ambient operating temperature: max. 30°C
storage temperature: -10°C to +50°C
hybrid kit: quick and straightforward build, no soldering required
communication: SD card or USB 2.0 (automatic SD card recognition)
controller board: AVR ATmega2560 based
AC input: 100 - 240 VAC 50-60 Hz 90 W max.
display: 128 x 64 px graphic display with blue backlight
print technology: Fused Filament Fabrication (FFF)
layer resolution: standard: 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm)
build plate: 80 x 80 mm
build volume: 80 x 80 x 75 mm / 3,15 x 3,15 x 2,95"
build plate surface: Metal plate with BuildTak™ (consumable, also sold separately)
print speed: 40mm/s
travel speed: 70mm/s
filament diameter: 1.75 mm
prints: PLA, ABS (testing with other materials in progress)
maximum nozzle operating temperature (extruder location: back): 245 °C
maximum nozzle operating temperature (extruder location: front): 260 °C
firmware: Modified Open Source Marlin 3D Printer. Firmware - user upgradable
software: Repetier - CuraEngine - Slic3r (RepRap compatible)
dimensions: 230 x 150 x 160 mm / 9 x 5,9 x 6,3"
frame: sturdy, metal frame
weight: 2.3 kg / 5 lb
average noise level during operation: 45dB(A)
ambient operation temperature: max 25 °C
storage temperature: - 10 °C to + 40 °C
communication: an SD card for direct printing and a USB connection for updates
controller board: AVR ATmega2560 based
display: 4 x 20 char. blue LCD with white backlight
AC input: 100-240 V
LED illuminated logo