Development Board

Items 1 to 36 of 57 total

Grid List

TEENSY LC Development Board, TEENSYLC

$12.95
ARM® Cortex-M0+ Processor at 48 MHz 62k flash memory, 1/8 (emulated) EEPROM, 8k RAM 12 bit analog input & output 27 I/O pins 13 Analog inputs 1 Analog output 10 PWM outputs 3 Serial 2 SPI 2 I2C 1 I2S (for high quality audio interface) Dimensions: 1.38” x 0.7” (35mm x 17.78mm)
Sale VELLEMAN Arduino mini 05 without headers

VELLEMAN Arduino mini 05 without headers, ARD-A000088

Regular Price: $16.95

Your Price: $9.99

14 digital input/output pins (of which 6 can be used as PWM outputs) 8 analog inputs  16 MHz crystal oscillator It can be programmed with the USB Serial adapter or other USB or RS232-to-TTL serial adapters Additional features coming with the 05 version are:- new PCB layout and design- on-board reset button
Sale VELLEMAN Arduino Micro with Headers

VELLEMAN Arduino Micro with Headers, ARD-A000053

Regular Price: $28.95

Your Price: $14.99

The Arduino Micro is a small microcontroller board based on the ATmega32u4
Sale ARDUINO LEONARDO with Headers

ARDUINO LEONARDO with Headers, DEV-11286

Regular Price: $24.95

Your Price: $19.99

The Arduino Leonardo is a microcontroller board based on the ATmega32u4.

VELLEMAN Microbit Advanced Kit, VMM002

$59.90
contains: USB cable: 1 x (PAC610B007N) microbit project holder, breakout board & components: 1 x microbit: 1 x battery: 4 x AAA (LR03C) microbit hardware: lights: 5 x 5 LED matrix buttons: 2 push buttons compass: detect magnetic fields accelerometer: detect changes in the microbit speed GPIO: 17 general purpose input / output pins Bluetooth: Bluetooth Low Energy (BLE) processor: 16 MHz ARM Cortex - M0 microcontroller32-bit processor connectivity: Bluetooth Low Energy (BLE) USB: USB 2.0 port and microUSB connector GPIO: up to 17 general purpose input / output pins RAM: 16 KB static RAM power supply: microbit project holder: 2 x AAA micro usb connector dimensions: microbit: 51 x 42 x 10 mm microbit project holder, breakout board: 158 x 105 x 24 mm
Sale VELLEMAN Microbit Starter Kit

VELLEMAN Microbit Starter Kit, VMM001

Regular Price: $39.90

Your Price: $29.99

contains: USB cable: 1 x (PAC610B007N) housing for microbit: 1 x battery holder: 1 x microbit: 1 x battery: 4 x AAA (LR03C) microbit hardware: lights: 5 x 5 LED matrix buttons: 2 push buttons compass: detect magnetic fields accelerometer: detect changes in the microbit speed GPIO: 17 general purpose input / output pins Bluetooth: Bluetooth Low Energy (BLE) processor: 16 MHz ARM Cortex - M0 microcontroller 32-bit processor connectivity: Bluetooth Low Energy (BLE) USB: USB 2.0 port and micro-USB connector GPIO: up to 17 general purpose input / output pins RAM: 16 KB static RAM power supply: battery holder: 2 x AAA micro-USB connector dimensions: microbit: 51 x 42 x 10 mm battery holder: 62 x 25 x 15 mm

TEENSY Audio Adapter Board, TEENSY-AUDIO-SD

$14.95
16 bit, 441 kHz Sample Rate Audio Plays Uncompressed WAV and Raw Audio Files 4 Channel Software Mixer 3.5mm Audio Jack micro-SD Card Slot

OSEPP STEM Kit 1 Starter Kit, STEM-01

$149.95
Lessons in Tutorial Booklet (INCLUDED): Chapter 1: Digital & Analog IO Blinking an LED Buzzer and LED Turning on a Fan Motor Display your name on Serial Monitor Button state and PIR state Display text on LCD Display Slider Potentiometer value on LCD  Display light intensity value on LCD Tone melody Chapter 2:  If/Else command, For Loop command and While Loop Command Turn on LED with button Alarm System with PIR (Passive Infrared) LED Control by Light Sensor Tone Notes with Buttons Fade LEDs Fading multiple LEDs Cycle 10 LEDs Blink LED and Melody Chapter 3:  Hardware RGB LED Basics Mixing RGB Colors with POTS (potentiometers) Servo Basics Control Servo with Slide POT Stepper Motor Basics Display Temperature Value on LCD Sound Sensor Basics Ultrasonic Basics Set Fan Forward and Backward Chapter 4:  Projects 3-Speed Household Fan Door Charm with PIR Mini Piano Night Light Welcome Home Door Entry Cooling Fan Sound Night Light Music Equalizer Ultrasonic Activated Alarm 100% Arduino Compatible Learn the most common Arduino functions with one board! Minimal cable ‘jumping’ required.  More time spent on actual LEARNING! 8 Output Devices 8 Input Devices Includes graphical TUTORIAL BOOKLET (for use with OseppBlock IDE) For ages 10+ No assembly required Includes protective case Includes OSEPP UNO R4 Plus Board (microcontroller)

RASPBERRY PI Sense Hat Astro Pi, 83-16980

$35.00
Gyroscope – angular rate sensor: +/-245/500/2000dps Accelerometer - Linear acceleration sensor: +/-2/4/8/16 g Magnetometer - Magnetic Sensor: +/- 4/8/12/16 Gauss Barometer: 260 – 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions) Temperature sensor (Temperature accurate to +/- 2 degC in the 0-65 degC range) Relative Humidity sensor (accurate to +/- 4.5% in the 20-80%rH range, accurate to +/- 0.5 degC in 15-40 degC range) 8x8 RGB LED matrix display Small 5 button joystick Compatible with Raspberry Pi B+, A+, and Pi 2

ARDUINO Pro Mini 328 - 5V/16MHz, DEV-11113

$9.95
ATmega328 running at 16MHz with external resonator (0.5% tolerance) 0.8mm Thin PCB USB connection off board Supports auto-reset 5V regulator Max 150mA output Over current protected Weighs less than 2 grams! DC input 5V up to 12V On board Power and Status LEDs Analog Pins: 8 Digital I/Os: 14

ARDUINO Pro Mini 328 - 3.3V/8MHz, DEV-11114

$9.95
ATmega328 running at 8MHz with external resonator (0.5% tolerance) Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc) 0.8mm Thin PCB USB connection off board Weighs less than 2 grams! Supports auto-reset 3.3V regulator Max 150mA output Over current protected DC input 3.3V up to 12V On board Power and Status LEDs Analog Pins: 8 Digital I/Os: 14
Sale VELLEMAN Brightdot Wearable Delevopment Board

VELLEMAN Brightdot Wearable Delevopment Board, VMW100

Regular Price: $69.90

Your Price: $29.99

Atmega32u4 @ 8 MHz native USB support 24 BrightDot addressable RGB LEDs (WS2812) ON/OFF switch reset button 1 user button 1 user LED PCF8523 RTC clock 10 GPIO sewable contacts and alligator clip friendly charging indicator LED RX/TX LED indication LEDs are mounted in a clock form free Arduino library included: an easy to use battery holder for 3 AA batteries (batteries not incl.)an easy to use battery holder for 3 AA batteries (batteries not incl.) USB 2.0 A to micro USB cable size: diameter: 8 cm (3,15 inch) height: 9 mm (3,54 inch) power supply: USB or battery powered max. battery supply voltage: 6 V current consumption: min. 20 mA, max. 1 A (when all RGB LEDs are on, software limited) battery or USB pass through output: max. 1 A (depends on battery and USB capacity) CPU speed: 8 MHz
Sale VELLEMAN ESP32 Wearable Development Board

VELLEMAN ESP32 Wearable Development Board, VMW101

Regular Price: $37.85

Your Price: $14.99

on board WiFi and Bluetooth® 8 x easy sewable pads: 4 x regular power pads 4 x capacitive touch-enabled pads 1 x on-board orange LED hall effect sensor temperature sensor ultra-low power analog pre-amplifier integrated LiPo battery charger dedicated reset button 2 × 8-bit DACs ultra-thin PCB Arduino compatible compatible with all BrightDot wearable LED boards based on the ESP32 SPI, I²S, I²C and UART interfaces the LED PWM, UART, I2C, I2S, and general purpose SPI functions can be configured to any GPIO 12-bit SAR ADC LED PWM (up to 16 channels) deep sleep mode to lower power consumption when preferable general purpose IO : 17 processors: CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS ultra low power (ULP) co-processor memory: 520 KB SRAM 448 KB ROM wireless connectivity: WiFi: 802.11 b/g/n Bluetooth®: v4.2 BR/EDR and BLE power management: max. current consumption: 300 mA deep sleep power consumption : 10 µA max. battery input voltage: 6 V max. battery charge current: 450 mA dimensions (W x L x H): 56 x 50 x 7.5 mm (2.2 x 1.97 x 2.95 inch)

VELLEMAN Medium Brightdot LED Pack, VMW103

$14.75
2 x fivefold BrightDot strips 2 x threefold BrightDot strips integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions threefold strip (L x W): 22 x 6.5 mm (0.87 x 0.25 inch) dimensions fivefold strip (L x W): 33 x 6.5 mm (1.29 x 0.25 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Large Brightdot LED Pack, VMW104

$16.40
2 x tenfold BrightDot strips integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm soler or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V dimensions (L x W): 60.5 x 6.5 mm (2.38 x 0.25 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Corner Brightdot LED Pack, VMW105

$9.90
2 x left BrightDot corners 2 x right BrightDot corners integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions (L x W): 14.25 x 6.5 mm (0.56 x 0.255 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN ARC Brightdot LED Pack, VMW106

$14.75
2 x left BrightDot arcs 2 x right BrightDot arcs integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V dimensions (L x W): 32.5 x 6.5 mm (1.28 x 0.25 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Small Brightdot Circle LED 2-Pack, VMW107

$17.90
2 x small BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! diameter: 32 mm (1.26 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Medium Brightdot Circle LED, VMW108

$16.40
1 x medium BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! diameter: 47 mm (1.85 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Large Brightdot Circle LED, VMW109

$17.90
1 x large BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V diameter: 69 mm (2.7 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Small Brightdot LED 5-pack, VMW102

$11.45
5 x singleton BrightDots integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions (L x W): 11 x 6.5 mm (0.43 x 0.25 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.08 inch) required: or other Arduino compatible development board