Jumpers & Connectors

34 Item(s)

Grid List

VELLEMAN Female to Female Jumper 40 pieces, VMA415

$3.40
contents: 1 pc. of multi-colour flat cable (40 wires) pre-cut, pre-stripped and pre-formed wires simplify and speed up prototyping work easy to connect and disconnect these wires are compatible with standard breadboards that have 0.1" grids Specifications: length: 30 cm (11.8") diameter: 22-26AWG insulation material: PVC conductor material: copper type: female to female connector cable

VELLEMAN Male to Female Jumper 40 pieces, VMA414

$3.40
contents: 1 pc. of multi-colour flat cable (40 wires) pre-cut, pre-stripped and pre-formed wires simplify and speed up prototyping work easy to connect and disconnect these wires are compatible with standard breadboards that have 0.1" grids Specifications: length: 30 cm (11.8") diameter: 22-26AWG insulation material: PVC conductor material: copper type: male to female connector cable

VELLEMAN Male to Male Jumper 40 pieces, VMA413

$3.40
contents: 1 pc. of multi-colour flat cable (40 wires) pre-cut, pre-stripped and pre-formed wires simplify and speed up prototyping work easy to connect and disconnect these wires are compatible with standard breadboards that have 0.1" grids Specifications: length: 30 cm (11.8") diameter: 22-26AWG insulation material: PVC conductor material: copper type: male to male connector cable

SPARKFUN JST Jumper 2 Wire Assembly, PRT-09914

$0.95
This is a simple two wire cable Great for jumping from board to board or just about anything else There is a 2-pin JST connector on one end, bare cable on the opposite end It also comes with the mating connector for the JST Dimensions: 6" length

SPARKFUN JST Jumper 3 Wire Assembly, PRT-09915

$1.90
This is a simple three wire cable Great for jumping from board to board or just about anything else There is a 3-pin JST connector on one end, bare cable on the opposite end It also comes with the mating connector for the JST Dimensions: 6" length

SPARKFUN JST Jumper 4 Wire Assembly, PRT-09916

$1.90
This is a simple four wire cable Great for jumping from board to board or just about anything else There is a 4-pin JST connector on one end, bare cable on the opposite end It also comes with the mating connector for the JST Dimensions: 6" length

Molex Jumper 2 Wire Assembly, PRT-09918

$0.95
There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end It also comes with the mating connector for the Molex Dimensions: 6" length

SPARKFUN Jumper Wire - 0.1", 3-pin, 6", PRT-10368

$1.50
There is a 3-pin JST RE connector on both ends.  These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length

SPARKFUN XT60 Connectors - Male/Female Pair, PRT-10474

$1.90
Perfect for applications up to 65A continuous draw.Sold in pairs of 1 male and 1 female connector.

SPARKFUN Deans Connector - M/F Pair, PRT-11864

$0.95
Each pack comes with one male and one female Deans connector and each can support a current of, up to, 30A.

VELLEMAN Jumper Wire Contact Pin Connector with Strain Relief 100pk, WJW007

$2.90
Create your own custom length jumper wires Crimp connector Accepts 22-26 AWG Snap fit plastic strain relief Copper connector 100 connectors and strain relief per package Also available in female  WJW008

SPARKFUN JST Right-Angle Connector 2 pin Board Mt, PRT-09749

$0.95
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm We really like the solid locking feeling and high current rating on these small connectors This connector will mate with most LiPo batteries

SPARKFUN 2 pin JST Jumper Wire - Black Red, PRT-08670

$0.95
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length

SPARKFUN Alligator Clip with Pigtail (4 Pack), CAB-13191

$2.95
  Each Alligator Clip with Pigtail cable has a wire length of 30cm (thats a little less than 1ft) and a male pin that easily inserts into a standard 0.1" connector Each pack consists of two red cables and two black cables

OSEPP Break Away Headers Straight 10pc, LS-00004

$11.49
Use with custom PCBs or general custom headers Break or cut to fit 40 pins per roll Pins are spaced by standard 0.1' 11.5 mm pin length

OSEPP Break Away Headers Long 4pc, LS-00005

$9.49
Standard break away headers but longer 20mm length allows you to use them socket to socket 40 pins per row Pins are spaced by standard 0.1'

OSEPP Female Headers10pc, LS-00006

$11.99
Single row of 40-holes, female header Can be cut to size with standard wire-cutters Pins are spaced by standard 0.1' Compatible to Olimex development boards Mates well with break away male headers

OSEPP Arduino Stackable Header 6 Pin 4pcs, LS-00007

$1.75
6 Pin female header with extra long legs Great for stacking Arduino or OSEPP Shields Pins are spaced by standard 0.1'

OSEPP Arduino Stackable Header 8 Pin 4pcs, LS-00008

$1.75
8 Pin female header with extra long legs Great for stacking Arduino or OSEPP Shields Pins are spaced by standard 0.1

OSEPPArduino Stackable Header 10 Pin 4pcs, LS-00009

$1.75
10 Pin female header with extra long legs Great for stacking Arduino or OSEPP Shields Pins are spaced by standard 0.1

OSEPP 4-Pin / IC CONNECTOR 4pcs, LS-CAB4P-08

$5.85
Length: 205mm +/- 5mm Connector: 4-pin 2.54mm pitch Wire: UL1571 -24AWG Pin mapping: straight through

OSEPP 6" F/F Premium Jumper Wires 50pcs, LS-FFPJ-6

$14.95
22AWG, UL1007 6" long Mates with 0.025' (0.635mm) pin 10 of each color Red, Black, White, Grey and Blue Temperate Range: 14F (-10C) to 176F (80C)  

OSEPP 6" M/F Premium Jumper Wires 50pcs, LS-MFPJ-6

$14.95
22AWG 6" long Mates with 0.025 (0.635mm) pin size 0.1 header size (breadboard friendly) 10 of each color Red, Black, White, Grey, and Blue Temperature Range (UL 1007): -10C / 14F to 80C / 176F

OSEPP 6' M/M Premium Jumper Wires 50pcs, LS-MMPJ-6

$14.95
22AWG, UL1007 6" long Mates with 0.025' (0.635mm) pin 10 or each color Red, Black, White, Grey and Blue Temperate Range: 14F (-10C) to 176F (80C)  

JST-PH 2-Pin SMT Right Angle Breakout Board, AF1862

$1.50
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length