Vises & Holders

21 Item(s)

Grid List

Velleman Helping Hand with Magnifier, VTHH

$5.90
Great for when 2 hands are not enough  With magnifier- dioptre 2.5

PANAVISE Tray Base Mount, 312 PANA

$22.90
Neatly organizes your small parts and tools! This cast aluminum Base Mount adds stability and has six integral parts wells with rounded and sloped walls for easy parts retrieval. Compatible with the 201 PV Jr. Vise and 300 & 305 Bases Includes six non-marring, anti-skid pads Three 1/4-20 holes are drilled and tapped on the outer lip for mounting accessories such as the 371 Solder Station (page 23) Overall diameter: 8.5" (215.9mm) Height: 0.75" (19.1mm), Weight: 1.9 lbs. (0.9kg)

PANAVISE Cricuit Board Holder, 315

$34.90
Our Circuit Board Holders help you work quicker and smarter! The best holder ever created for working with circuit boards, this model fits all 300 series Bases. Hold circuit boards up to 12" (304.8mm) wide and up to 0.156" (4mm) thick Arms move independently and feature "V" shaped grooves Notches positioned at the arms' tips conveninetly hold small parts Ratcheted pivot holds board horizontally, vertically or any angle in between Shaft is 4.125" (104.8mm) long and 5/8" (15.9mm) in diameter; compatible with all 300 series Bases Height (bottom of shaft to tip of arms): 10.875" (276.2mm) Weight: 1.0 lb. (0.5kg)

PANAVISE Electronics Work Center, 324 PANA

$89.90
Makes your work areas more efficient and manageable! This complete package creates an economical work station with everything right at your fingertips! This practical, pre-assembled combination includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station  Single control knob and exclusive "split-ball" lock the Circuit Board Holder firmly into place Release the knob pressure and Circuit Board Holder Tilts 90°, Turns 360° & Rotates 360° and can be easily removed from the base. Base is compatible with all 300 series Heads Height: 13.5" (342.9mm) Weight: 4.5 lbs. (2kg)

PANAVISE Rapid Assmebly Circuit Baord Holder, 333 PANA

$89.90
Speed your production work! For quick circuit board rotation and component insertion/soldering, nothing beats this work holding tool for speed and versatility. Features eight rotating adjustment positions at the head, six positive lock positions in the vertical plane, and variable height adjustment Hold circuit boards up to 10" (254mm) wide and up to 0.156" (4mm) thick Arms move independently and feature "V" shaped grooves Notches positioned laterally near the arm's tips securely and conveniently hold small electronic parts 5.0 lb Weighted Base is extremely stable Height (base to top of vertical shaft): 10" (254mm), Weight: 6.4 lbs. (2.9kg)

PANAVISE Multi-Purpose Work Center, 350

$99.00
Perfect for home repair or hobby needs! A versatile combination designed for holding larger, heavier objects. Very stable. An exceptional choice for any workbench! Self-centering, extra-wide opening jaws open a full 9" (228.6mm) and hold heavier objects by centering weight over base Parts Tray Base Mount adds stability [8.5" (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools. Includes six non-marring, anti-skid pads Ribbed, neoprene jaw pads are 1.875" (47.6mm) high x 1.5" (38.1mm) wide and provide a sure grip; reverse the pads and the wide "V" holds cylindrical objects Single knob controls head movement through 3-planes: 90° Tilt, 360° Turn & 360° Rotation "Double-action" jaws open/close quickly. Can be reversed to provide 'zero' closure Base accepts all 300 series Heads and any 5/8" (15.9mm) diameter shaft Height: 7.875" (200mm), Weight: 5.0 lbs. (2.3kg)

PANAVISE Wide Opening Vice Head, 366

$54.90
Hold larger objects with this general purpose Vise Head! Jaw pads gently, yet firmly, hold a wide variety of objects including circuit boards, coils and tuners. Jaws open a generous 6". Jaws pads are 1.875" (47.6mm) high x 1.5" (38.1mm) wide. Opens to 6" (152.4mm) with jaw pads and 6.25" (158.8mm) without jaw pads Ribbed, neoprene jaw pads provide a sure grip and can hold and insulate PC boards and other larger objects; reverse the pads and the wide "V" holds delicate cylindrical objects Remove jaw pads from steel jaws when working with high heat Black oxide coating reduces glare and promotes eye comfort Head Length: 11" (279.4mm) Compatible with all 300 series Bases Height (shaft to top of jaw pads): 5.125" (130.2mm), Weight: 1.6 lbs (0.7kg)

PANAVISE Self-Centering Wide Opening Vice Head, 376

$49.90
Hold larger, heavier objects with this versatile Vise Head! By centering weight, this Vise Heads holds even larger and heavier objects with ease. Jaws open a full 9". Self-centering, extra-wide opening jaws open a full 9" (228.6mm) and hold heavy objects by centering weight over the base Ribbed, neoprene jaw pads are 1.875" (47.6mm) high x 1.5" (38.1mm) wide and provide a sure grip; reverse the pads and the wide "V" holds round or elliptical objects "Double action" jaws open/close quickly. Jaws can be reversed to provide 0" closure Black oxide coating reduces glare and promotes eye comfort Compatible with all 300 series Bases Head Length: 11.5" (292.1mm) Height (shaft to top of jaw pads): 5.25" (133.3mm), Weight: 1.9 lbs. (0.9kg)

PANAVISE PV Jr. Head, 203

$24.90
Our most popular Vise Head for arts and crafts, model making, electronics and other small projects! We've adapted a PV Jr. Head to fit all 300 series Bases. Now you can add all the popular features of a PV.Jr. to a larger 300 series Base. Fine/coarse adjusting knob controls jaw pressure Jaws feature horizontal grooves perfect for holding small tubes, rods, or small circuit boards firmly in place and are made of reinforced thermal composite plastic [continuous heat tolerance to 350°F (177°C), intermittent heat up to 450°F (204°C)] Neoprene Jaw Pads (page 22) are available for holding delicate items  Jaws are 2" (50.8mm) tall, 1" (25.4mm) wide and open to 2.875" (73mm) Height: 3.75" (95.2mm), Weight: 0.4 lbs. (0.2kg)

PANAVISE Bench Clamp Base Mount, 311 PANA

$44.90
Clamps to a table, workbench, ladder ... wherever you need it! Take your vise anywhere you need it! Clamps to anything up to 3.4375" (87.3mm) thick. Compatible with the 201 PV Jr. Vise and 300 & 305 Bases  Includes four non-marring, anti-skid neoprene pads for additional anti-slip characteristics without excessive tightening of the clamping screw. Finger grip for added convenience Throat depth from center of clamping screw: 2.3125" (58.7mm) Weight: 2.4 lbs. (1.1kg)

PANAVISE Low Profile Vise Base, 305

$24.90
Popular for jewelry making, watch repair and lapidary work! This unique Head can be positioned more closely to the work surface - great for use under a magnifying light When used with a 305 Low Profile Base, you can create a very low-profile Vise Features steel jaws. Throat depth: 1.375" (34.9mm) Length: 7.75" (196.8mm), Weight: 1.4 lbs. (0.6kg)

PANAVISE Low Profile Vise Head, 304

$39.90
Popular for jewelry making, watch repair and lapidary work! This unique Head can be positioned more closely to the work surface - great for use under a magnifying light When used with a 305 Low Profile Base, you can create a very low-profile Vise Features steel jaws. Throat depth: 1.375" (34.9mm) Length: 7.75" (196.8mm), Weight: 1.4 lbs. (0.6kg)

Velleman Helping Hand with Magnifier Clamp-on, VTHH5

$19.90
Holds item securely, leaving hands free with 2 clamps The flexible alarm allows a full range of adjustment while you work 20 dioptre (5 x magnification) Desktop clamp base

PANAVISE Vacuum Base PV Jr., 209

$31.49
The easy-to-use single knob controls head movement through 3-planes: 210 Tilt, 360 Turn & 360 Rotation Fine/coarse adjusting knob controls jaw pressure for delicate work Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic [continuous heat tolerance to 350F (177C), intermittent heat up to 450F (204C)] Jaws are 2" (50.8mm) tall, 1" (25.4mm) wide, and open to 2.875" (73mm) Arm movement is 140; positive indents control movement to prevent "flopping"; the control knob locks the arm firmly into place Lever locks vacuum pad into place on any smooth, flat, non-porous surface; lift tab to release vise from surface Base Diameter: 3.4" (86.4mm), Height: 7.5" (173mm), Weight: 0.8 lbs. (0.4kg)

PANAVISE The ORIGINAL Small Vise, 301R

$49.90
The easy-to-use single knob controls head movement through 3-planes: 90 Tilt, 360 Turn & 360 Rotation Jaws are 2.5" (63.5mm) wide, 0.5" (12.6mm) tall and open to 2.25" (57.1mm) Nylon jaws offer excellent electrical insulation and gentle holding power [continuous heat tolerance up to 200F (93C), intermittent heat to 300F (149C)]. Interchangeable jaws available Base accepts all 300 series Heads and any 5/8" (15.9mm) diameter post Base features 4.3125" (109.5 mm) bolt circle countersunk for three 1/4" (6.3mm) flat-head screws (not included) Height: 6.25" (171.4mm), Weight: 2.7 lbs. (1.2kg)

PANAVISE Vacuum Base Vise, 381R

$67.49
Our Vacuum Base PanaVise is widely used for portable applications Single knob controls head movement through 3-planes: 90 Tilt, 360 Turn & 360 Rotation Jaws are 2.5" (63.5mm) wide, 0.5" (12.6mm) tall and open to 2.25" (57.1mm) Nylon jaws offer excellent electrical insulation and gentle holding power [continuous heat tolerance up to 200F (93C), intermittent heat to 300F (149C)]. Interchangeable jaws available Base accepts all 300 series Heads and any 5/8" (15.9mm) diameter shaft Pad footprint measures 5.125" x 4.25" (130.2mm x 108mm) Height: 6.125" (155.6mm), Weight: 2.8 lbs. (1.3kg)

PANAVISE PV Jr. Mini-Vise, PVJR

$26.99
Perfect for arts and crafts, jewelry and model making, electronics, and other small projects! Your work is held gently, but securely, and can be positioned exactly where you want it.

PANAVISE Vise Buddy Jr., 207

$22.90
The Versatile Workbench Buddy! Instantly transform your bench vise into a precision vise without changing work stations! Designed to be used with a traditional cast iron bench vise Does the detailed, delicate jobs a bench vise can't Through-holes allow it to be mounted to a pegboard for quick access Perfect for arts and crafts, jewelry and model making, electronics and other small projects.  Your work is held gently, but securely, and can be positioned exactly where you want it. The easy-to-use single knob controls head movement through 3-planes: 210° Tilt, 360° Turn & 360° Rotation Fine/coarse adjusting knob controls jaw pressure for delicate work Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic. Continuous heat tolerance to 350°F (177°C), intermittent heat up to 450°F (204°C) Jaws are 2" (50.8mm) tall, 1" (25.4mm) wide, and open to 2.875" (73mm) Neoprene jaw pads are available for holding extremely delicate items

PANAVISE Standard Vise Base, 300

$24.90
Our most popular base! Accepts all 300 series Heads and the PV Jr. 203 Head or any 5/8" (15.9mm) diameter shaft. Create a versatile work holding system by selecting two or three different Heads! Single control knob and exclusive "split-ball" lock Head firmly in place Base features 4.3125" (109.5mm) bolt circle countersunk for three 1/4" (6.3mm) flat-head screws (not included) Height: 3.75" (95.2mm), Weight: 1.4 lbs. (0.6kg)

PANAVISE Standard Vise Head, 303

$29.90
Our best selling general purpose Vise Head Perfect for hobbies, electronics and small home repairs! Select the 300, 305 or 380 Base and create your own versatile vise. Jaws are 2.5" (63.5mm) wide, 0.5" (12.6mm) tall and open to 2.25" (57.1mm) Nylon jaws offer excellent electrical insulation and gentle holding power [continuous heat tolerance up to 200°F (93°C), intermittent heat to 300°F (149°C)]. Vice accessories available for this Head Throat depth: 1.375" (34.9mm) Height: 4.25" (108.0mm), Weight: 1.5 lbs. (0.7kg)

PANAVISE Vacuum Base Vice, 380 PANA

$39.90
Create the world's most PORTABLE work holding tool! Add any of our compatible Vise Heads to this Base and build a versatile, portable work station. Our Vacuum Base is in wide use for portable applications. Simply flip the lever to "activate" the rubber pad and attach the unit to any smooth, non-porous flat surface Accepts all 300 series Heads and any 5/8" (15.9mm) diameter shaft Pad footprint measures 5.125" x 4.25" (130.2mm x108mm) Single control knob and exclusive "split-ball" locks Head firmly in place Height: 3.25" (82.5mm), Weight: 1.7 lbs. (0.8kg)