Because our price on this item is lower than the manufacturer's
suggested retail price , the manufacturer does not allow us to show
you our price until you place the item in your shopping cart.
Adding this item won't require you to purchase the product. You
can easily remove the product from your cart if you decide not to buy it.
When you think of chemicals for electronics, think of "You-do-it" Electronics Center. Cleaners, lubricants, dusters, freeze sprays, coatings, solvents, shielding and more. If you don't see what you're looking for, call or email us.
Cleans, protects, lubricates, and improves conductivity
Reduces intermittent connections, arcing, and RFI as well as wear and abrasion
Safe for use on all metal connectors and contacts and will not harm plastics
Safe on all substrates
Non-flammable and non-abrasive
Eliminates static charge with one application
Reduces attractions of dust and other airborne contaminants
Non-streaking and non-dripping - excellent for transparent and vertical surfaces
Suitable for Use in Food Facilities as a Non-Food Chemical - Canadian and NFS recognition letters available on request
A 3-row toothbrush style general cleaning brush
Natural stiff hog hair bristles with 7 plywood handle
Can be used dry or wet
Works well with sticky or crusty materials
1.2" x 3.0" board with a total of 300 solder type donut pads/holes
Will match with RH20 push-in protoboard
.042" diameter holes with copper donut surrounds
Holes spaced 0.10" centers
Board thickness is 1/16"
High dielectric strength
Maintains dielectric protection under conditions of high humidity and high temperature
Excellent finish – tough, flexible, glossy, and durable transparent coat
Adheres to metals, glass, and most common plastics
HAPs-free solvent system (no xylene, toluene, and MEK)
Certified UL94 V-0 (File# E203094)
Maximum service temperature of 200 °C
Fast cure – tack free in about 10 min; dries in 20 min at 65 °C [149 °F]
Fluoresces under UV-A light
Validated for selective robotic coating equipment
Corrosion resistant
Low volume resistivity of 0.0068 'cm
Creates durable, reliable, highly conductive connections
Typical trace width: 1.0 mm
Dries in minutes at room temperature
Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic
substrates
Adheres well to ABS, PLA, and other 3D printing plastics
Good corrosion resistance
Mild solvent system, safe on polystyrenes
Toluene and xylene free
10ml size
Volume resistivity: =0.5 'cm
Creates durable, reliable, conductive connections
Typical trace width: 1.0 mm
Dries in minutes at room temperature
Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic
substrates
Adheres well to ABS, PLA, and other 3D printing plastics
Superior corrosion resistance
Mild solvent system, safe on polystyrenes
Toluene and xylene free
10ml size
3ml size
Silicone Free
Extreme thermal conductivity (1.8 W/m*K)
Excellent operating temperature range (-68°C - +165°C)
High dielectric strength
Non-bleeding
Non-conductive
Long service life
Safe on plastics
Provides excellent corrosion resistance
62.5ml tube
Very high maximum operating temperature (-68°C - +200°C)
Good thermal conductivity
High dielectric strength
Non-bleeding
Non-conductive
Long service life
Safe on plastics
Provides excellent corrosion resistance
Contact conductivity improvement