Maker & DIY Technology
"You-do-it" Electronics Center is your one stop shop for all your DIY maker projects. From component level to finished project, we have the parts you need. If you don't see what you're looking for, call or email us.
SPARKFUN JST-PH (2mm) 2-Conductor Pigtail w/ PCB Header, PRT-09914
$0.95
This is a simple two wire cable
Great for jumping from board to board or just about anything else
There is a 2-pin JST connector on one end, bare cable on the opposite end
It also comes with the mating connector for the JST
Dimensions: 6" length
SPARKFUN Molex Jumper 2 Wire Assembly, PRT-09918
$1.90
There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end
It also comes with the mating connector for the Molex
Dimensions: 6" length
SPARKFUN Jumper Wire - 0.1", 3-pin, 6", PRT-10368
$1.90
There is a 3-pin JST RE connector on both ends.
These are simple jumper wires used on standard 0.1" breakaway headers.
Dimensions: 6" length
SPARKFUN XT60 Connectors - Male/Female Pair, PRT-10474
$1.90
Perfect for applications up to 65A continuous draw.Sold in pairs of 1 male and 1 female connector.
OSEPP JST 4 Pin Wire Assembly 6" 10pk, LS-00088
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
OSEPP JST 3 Pin Wire Assembly 6" 10pk, LS-00089
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
New
SPARKFUN IoT Power Relay (Voltage Controlled Relay), COM-14236
$39.90
Universal control voltage 3-60VDC or 12-120VAC
A single input signal switches four outlets: one normally on, one always on, two normally off.
Optical isolation, relay hysteresis and de-bounce protection add safety.
A large MOV clamps surges for clean 90-140VAC power.
The durable SPDT control relay is rated at 30/40A, >400,000 operations at 12A or 2 million+ operations at 5A.
A 12A thermal safety circuit breaker switch prevents overloads.
Mounting tab with two screw holes
Dimensions: 170mm x 95mm x 35mm (6.69in x 3.74in x 1.37in)
OSEPP 201 Arduino Basics Starter Kit, ARD-02
$99.00
Discover Arduino through EASY and FUN lessons
Step-by-step instructions with diagrams
No prior electronics knowledge required
Kit comes with everything you need to build 15 projects across 8 categories:
1. Temperature
2. Light
3. LEDs
4. Sound
5. Ultrasonic
6. Servo Motors
7. Stepper Motors
8. LCD
OSEPP Micro SD Shield, MSDS-01
$12.95
5v+3v3 or 3v3 operation
1312 0.1 pitch prototyping area
Compatible with popular libraries
Interfaces over SPI with CS on pin 8
OSEPP Proto Shield, PROTO-01
$9.95
1316 0.1 pitch prototyping area
Two LEDs with the anode pin exposed (JC2, JC3)
Arduino Reset button
A User push-button with Pull-up (JC1)
BlueSMiRF header
VELLEMAN Corner Brightdot LED Pack, VMW105
$9.90
2 x left BrightDot corners
2 x right BrightDot corners
integrated backup line (this ensures that one broken LED does not affect the next LED)
each PCB has gold plated contacts with 6 sewing holes of 1.22 mm
solder or sew them!
dimensions (L x W): 14.25 x 6.5 mm (0.56 x 0.255 inch)
max. current consumption: 60 mA / LED at full brightness
power supply: 3.3 V - 5 V
PCB thickness: 2.1 mm (0.082 inch)
required: or other Arduino compatible development board
VELLEMAN Brightdot Power & Fuse Pack for Electronics Wearables, VMW111
$7.99
includes: fuse board
Vin connectors:
BAT1: soldering points for your own power connection
BAT2: JST Connector for standard LiPo battery and/or our Alkaline battery pack
Vout connector: JST
fuses:
fuse to protect the LED circuit
fuse to protect the development board
battery pack for 3 x AA batteries (batteries not incl.)
fuse board to development board cable
spare fuses (one of each type)
fuse board dimensions (W x L x H): 38 x 38 x 7.4 mm
fuse trip current LEDs: 500 mA
fuse trip current development board: 750 mA
fuse board max. forward voltage: 360 mV
NTE 8-Channel Darlington Array/Driver ULN2803 Equivalent, 2018
$3.81
Ideally suited for interfacing between low−level digital logic circuitry and high−power peripheral loads
High−voltage, high−current Darlington arrays in an 18−Lead DIP type package and feature peak load current ratings to 600mA for each of the eight drivers in each device
Typical loads include relays, solenoids, stepping motors, multiplexed LED and incadescent displays, and heaters
OSEPP Motor Driver Module, MTD-01
$17.59
100% Arduino Compatible
L298 dual h bridge driver
Reverse motor polarity (motor direction)
ELENCO Learn to Solder Kit with Soldering Iron & Cutters, AK-100
$24.90
This kit also includes a soldering iron and wire cutters
This kit requires soldering
MG CHEMICALS 1.75mm PETG 3D Printer Filament 1kg Black, PETG17BK1
$32.95
High purity Polyethylene terephthalate glycol-modified (PETG)
Print times comparable to PLA
High strength and flexibility
Translucent
Minimal shrinkage and warping
Recyclable
1.75mm diameter
5 colors available
Low Diameter variance
No heated bed required
Print temperature: 210 to 240 °C
Color may vary from picture**
OSEPP Standard Economy Servo Motor Contiuous Rotation, LS-5010CR
$19.95
Suitable for hobby, models, science and other projects.
Comparable to Servocity # 31311S20
Voltage Range: 4.8 – 7.2 Volts
Stall Torque (6.0V): 4.1 kg.cm
Stall Torque (4.8V): 3.2kg.cm
JR Wire Configuration
No-load Speed (6.0V / 4.8V): 0.19sec/60° / 0.23sec/60°
Dimensions: 40.8*20.1*38mm
Weight: 44g
Rotation: Continuous
Output Shaft Style: 25 tooth spline
Star Simpson's Circuit Classics Bargraph Voltage Indicator, AF3460
$38.55
This circuit lets you become a scientist and an engineer and marks the passage of that important milestone of using tools you have constructed yourself.
You can measure batteries or use it to explore and understand other electronic circuits that you find in the world.
They make a great gift for a first-time learner, an expert tinkerer, or even just as a fun conversation piece for your desk.
ELENCO LED Robot Blinker Kit, K-17
$9.90
With the LED Robot Blinker; you will learn about free-running oscillators.
You'll have fun building; displaying and learning about the LED Robot Blinker.
This kit requires soldering
GEEK CLUB W4 Scout Recon, GC-PB-W401
$79.00
Advanced solder kit
Surface mount soldering
Includes, parts, instruction manual and comprehensive educational book
OSEPP R260 3-6V 12000 RPM Brushed DC Motor, LS-00026
$3.28
Small R260 Brushed DC Motor
Nominal Voltage: 3V
No Load RPM: 7000rpm (±10%)
Shaft Diameter: 2mm
SPARKFUN Hobby Motor with Gear 1-3 VDC, ROB-11696
$2.10
1.0 to 3.0VDC Motor but can handle a max load of up to 12VDC
No load speed of 660010% RPM (@1.0V DC, 110mA).
SCIENCE WIZ Electricity Projects, 7800
$27.90
18 Activities including
Spin motors and pinwheels
Light lights
Buzz buzzers
Send coded messages
Test what conducts
SCIENCE WIZ Electronics Projects, 7817
$27.90
Go from potato batteries to voltage piles to building electronic circuits!
Build a LIE DETECTOR!
Assemble and test a touch sensor
Construct blinking and flashing-light circuits
Make a potato battery and voltage pile
Solve circuit puzzles
Make a continuity tester
Master circuits with a multimeter
Explore Ohm’s Law
OSEPP F130 1.5-3V 12000 RPM Brushed DC Motor, LS-00024
$3.28
1 x F130 1.5-3V 12000 RPM Brushed DC Motor
Small Flat Side F130 Brushed DC Motor
Nominal Voltage: 3V
No Load RPM: 13800rpm (±10%)
Shaft Diameter: 2mm
