OSEPP UNO R4 Plus
OSEPP UNO R4 Plus
Item #: UNO-04
In stock
$27.95
Main Features
- 8-bit AVR RISC-based microcontroller running at 16 MHz
- Connects to a computer via a standard USB cable
- Flexible power source (USB or DC power)
- ICSP header for programming microcontroller
- Compatible with existing Arduino software libraries
- Compatible with all Arduino shields make for Arduino UNOs.
Related items
OSEPP 16 2 LCD Display & Keypad Shield, 16X2SHD-01
$16.49
Mate with Arduino and Arduino compatible boards
Display up to 16 characters by 2 line
Integrated the SPLC780D 16 COMs x 40 SEGs dot-matrix LCD controller and driver
5V operating voltage
5 button keypad up, down, left, right, and select
Brings out the Arduinos reset button to the top of the shield
OSEPP 6" F/F Premium Jumper Wires 50pcs, LS-FFPJ-6
$14.95
22AWG, UL1007
6" long
Mates with 0.025' (0.635mm) pin
10 of each color Red, Black, White, Grey and Blue
Temperate Range: 14F (-10C) to 176F (80C)
OSEPP 6" M/F Premium Jumper Wires 50pcs, LS-MFPJ-6
$14.95
22AWG
6" long
Mates with 0.025 (0.635mm) pin size
0.1 header size (breadboard friendly)
10 of each color Red, Black, White, Grey, and Blue
Temperature Range (UL 1007): -10C / 14F to 80C / 176F
OSEPP 6" M/M Premium Jumper Wires 50pcs, LS-MMPJ-6
$14.95
22AWG, UL1007
6" long
Mates with 0.025' (0.635mm) pin
10 or each color Red, Black, White, Grey and Blue
Temperate Range: 14F (-10C) to 176F (80C)
OSEPP Micro SD Shield, MSDS-01
$12.95
5v+3v3 or 3v3 operation
1312 0.1 pitch prototyping area
Compatible with popular libraries
Interfaces over SPI with CS on pin 8
OSEPP Proto Shield, PROTO-01
$9.95
1316 0.1 pitch prototyping area
Two LEDs with the anode pin exposed (JC2, JC3)
Arduino Reset button
A User push-button with Pull-up (JC1)
BlueSMiRF header
OSEPP Motor & Servo Shield, SCSHD-01
$21.45
Mate with Arduino and Arduino compatible boards
Provides connectors to support 2 servos.
Servo power supply can be configured to source from the servo power terminal block or from the Arduinos 5V pin.
Support up to 4 bi-directional DC motors with individual 8-bit speed selection, and up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
Motor power supply can be configured to source from the motor power terminal block or from the Arduinos VIN pin. Support motors operating between 4.5V to 25V DC.
Includes two L293D Quad H-Bridges chipset that can provide 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
Provides DIP sockets to support other pin compatible motor bridge chipset.
Integrated pull down resistor to keep motor disable during start up.
Individual LED indicator for motor power supply state and servo power supply state.
Brings out the Arduinos reset button to the top of the shield