Terminal

21 Item(s)

Grid List

ECLIPSE Crimper Pliers for Telecom Splices, 100-008

$14.98
UY, UG & UR connectors Built-in stop to protect against over crimping Side cutter Insulated handles

KLEIN Klein-Kurve Heavy-Duty Wire Stripper 8-20 AWG, K12035

$34.97
Strips 8 to18 AWG Solid and 10 to 20 AWG Stranded wire Large knurled plier tip pulls and twists wire Shear cutting knives for easier cutting of copper wire and larger material such as Romex® cable (all sizes) and other nonmetallic (type NM) sheathed cable Screw shearing for 6-32 and 8-32 screws Wire looping hole Klein-Kurve™ comfort grip handles for reduced hand fatigue Hot riveted joint prevents wobble and separation of the blades over time Textured grips for enhanced dexterity and integrated hang holes Romex® is a registered trademark of Southwire Company

KLEIN Ratcheting Crimper, 10-22 AWG - Insulated Terminals, 3005CR

$29.97
Crimps insulated terminals onto 10-22 AWG stranded copper wire Adjustable compound action design puts more crimping power into each squeeze Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals Built-in ratchet ensures full-cycle crimping for a uniform crimp every time Unique cavity design provides consistent crimp from either side of the tool Dial adjusts the amount of force applied to the crimp Dual-material molded grips provide added comfort

ECLIPSE Pin Extractor .130" OD .110" ID, 902-398

$16.50
Extracts pins and sockets from commonly used connectors such as AMP 

KLEIN All-Purpose Pliers with Crimper, J207-8CR

$47.99
Strips 10-18 AWG Solid Wire 12-20 AWG Stranded Wire Crimps non-insulated connectors, lugs and terminals

ECLIPSE Ratcheted Crimper for Red/Blue/Yellow Term, 300-002

$39.90
Ratcheted Crimper for Red/Blue/Yellow Terminals Application: Red, Yellow, Blue Insulated terminals Nylon and Vinyl Crimp Size:  AWG 22-18/ 16-14/ 12-10

ECLIPSE Flat Cable IDC Crimper, 300-011

$22.03
For crimping IDC-type of connectors onto flat cables Application: DC-type connectors Height: 6mm~27.5mm Width(Max): 55mm Overall Length: 240/9.4

ECLIPSE Heavy Duty Crimping Tool for AWG 8 to 250 MCM, 300-107

$138.84
Two capacity plates-Aluminum and copper Crimps terminals from AWG 8 to 250 MCM Adjustable w/ knob on top of tool Overall length 22.5"

WIHA Soft Grip Ferrule Crimping Pliers, 32604

$25.68
High Quality forged C70 Tool Steel Induction Hardened Cutting Edges and Jaws Soft Vinyl Grip Handles are Oil and Solvent Resistant For End Ferrule Crimps

PHILMORE Ratchet Crimp Tool for .062/.093 Contacts, 61-394

$39.90
Crimps male pins and female sockets For .062" and .093" diameter Works for the 61-xxx series connectors

PHILMORE Heavy Duty Cut and Crimp Tool, 63-601

$14.90
Cuts #10 - 22 AWG Wire Crimps Insulated and Uninsulated terminals

PHILMORE High Density D-Sub Crimp Tool, 63-603

$19.48
Used for high density D-Sub crimp contacts Also works with crimp type locking connectors