Amplifiers

10 Item(s)

Grid List

ATLAS 120 Watt 6 Input Mixer Amplifier, AA120

$499.00
  • 120 Watt 6 Channel Mixer Amplifier
  • 5 Mic/Line Inputs with Phantom Power and 1 Stereo Summing AUX Input
  • Bridge In/Out Circuit with Balanced Link / Internal Relay to Engage Circuit is Perfect for Small Room Combining Systems Eliminating the Need for External Electronics
  • Pre Out / Power Amp In for Patching External Processors
  • Remote or VOX Mute Capabilities
  • Zone 2 MOH Out from CH6 Line Source

SPECO 60W RMS P.A. Mixer Amplifier, PMM60A

MAP price: $846.00 ? Please add this item to the cart to view the price

  • RMS Output Power: 60 Watt
  • Speaker Ouput: 4/8/16 Ohms, 70/25V
  • Inputs: 3 x Mic (XLR), 1 x Mic (XLR or Terminal)
  • 3 x Mic/Aux (Terminal or Stereo RCA), 1 x EQ/Mix (RCA)
  • 1 x TEL (Terminal)

SPECO 20 Watt 12vdc Mobile Amplifier with Mic, PAT20TB

MAP price: $217.50 ? Please add this item to the cart to view the price

  • Talk-back feature turns a remote speaker (not included) into a listening device for two-way conversations
  • Includes push to talk handheld CB style microphone Includes mounting hardware
  • RMS Output Power: 12W/Max. Output Power...22W
  • Power Supply: DC 11V to 16V
  • Speaker Outputs: 4/8 Ohms
  • Inputs:1 x Mic (1/4"), 1 x Aux (1/4")
  • Dimensions:5.1" (W) x 1.25" (H) x 4.5" (D)
  • Includes Microphone

PHILMORE AC/DC PA Amplifier, PA503

$149.00
  1. Operates on 12VDC or 117VAC 50-60Hz
  2. Convenient Mike Input on Rear and Front Panel 
  3. Ideally suited for both crisp and clean sound whether using amplifier for voice or music. 
  4. Includes sturdy Adjustable Mounting Bracket 
  5. Size: 10-3/4" W x 6-3/8" D x 2-3/4" H (Less Feet)
  6. Power Output: 30 watts RMS @ 2% THO
  7. Frequency Response: 50 - 18,000 Hz
  8. Line Outputs: 25 volts & 70 volts Output Impedance: 4-8-16 ohms Power Requirements: 12VDC and / or 117VAC 50-60Hz

QSC AMP 500W/CH 70V-2000W MONO, CMX-800VA

$870.00
  • 500W per channel at 8 ohm / 2000W at 70 volt bridged mono
  • 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
  • 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS
  • 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block
  • Rack mountable with chassis less than 16" (40.6 mm) deep
  • 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
  • Tamper-proof security cover for gain controls
  • Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
  • Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC CMX500Va Commercial Power Amp, CMX-500VA

$620.00
  • 300W per channel at 8 ohm / 1200W at 70 volt bridged mono
  • 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
  • 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS
  • 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block
  • Rack mountable with chassis less than 16" (40.6 mm) deep
  • 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
  • Tamper-proof security cover for gain controls
  • Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
  • Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

QSC CMX300Va Commercial Power Amp, CMX-300VA

$480.00
  • 200W per channel at 8 ohm / 600W at 70 volt bridged mono
  • 'Flex-Use' loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
  • 'Flex-Use' input connectivity choices including actively balanced barrier strip, XLR, or " TRS
  • 'Flex-Use' output connectivity choices include NL4 Speakon and detachable terminal block
  • Rack mountable with chassis less than 16" (40.6 mm) deep
  • 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
  • Tamper-proof security cover for gain controls
  • Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
  • Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool

ATLAS 60 Watt 3 Input Mixer Amplifier, AA60

$299.00
  • 1 Mic In w/Phantom Power
  • 2 Stereo Line Inputs
  • Dual Line Outputs
  • Pre Out/ Power In Patch
  • Remote and VOX Activated Mute
  • Route Any Source Combination or Entire Mix Bus to Zone 2 (MOH Out)

ATLAS 35 Watt 3 Input Mixer Amplifier, AA35

$199.00
  • 1 Mic In w/Phantom Power
  • 2 Stereo Line Inputs
  • 35 Watts of True Output Power
  • Dual Line Outputs
  • Pre Out/ Power In Patch
  • Remote and VOX Activated Mute
  • Route Any Source Combination or Entire Mix Bus to Zone 2 (MOH Out)

SPECO PA AMP 15W, PVL15A

MAP price: $224.80 ? Please add this item to the cart to view the price

  • RMS Output Power: 15W 
  • Max. Output Power: 30W 
  • Power Supply: AC 120V, 50/60Hz 
  • Speaker Outputs: 4/8/16 Ohms, 70/25V 
  • Inputs: 2 x Mic (1/4" and 1/4" or XLR) 1 x Aux (1/4")
  • Frequency Response: 50Hz ~ 15KHz 50Hz ~ 15KHz
  • Dimensions: 8.25" (W) x 3" (H) x 7.9" (D)