Prototyping

Items 1 to 36 of 40 total

Grid List

VELLEMAN Solderless Breadboard 840 Tie Points, SD12N

$5.99
material: external body is made of ABS the internal interconnected clips are made of an alloy of silver and nickel base socket: 1 bus strip: 2 tie points: 840 14-pins IC capacity: 9 binding post: 0 dimensions: 6.6" x 2.2" x 0.4" weight: 3.4oz

ELENCO Solderless Breadboard 1660 Tie Points, 9433

$19.90
1660 Test Points 252 Separate 5 Point Terminals 8 Horizontal Bus Lines of 50 Test Points Each Binding Posts Coded Black; Red and Green

ELENCO Solderless Breadboard 2420 Tie Points, 9438

$24.90
2390 Test Points 378 Separate 5 Point Terminals 10 Horizontal Bus Lines of 50 Test Points Each Binding Posts Coded Black; Red; Yellow and Green

ELENCO Pre-formed Jumper Wire Kit 350pcs, JW-350C

$13.25
Contains 350 lengths of pre-stripped; pre-formed #22 solid wire in various colors 14 different lengths of 25 pieces each Storage case included

VELLEMAN Solderless Breadboard 840 Tie Points, SDTP009

$5.99
ABS plastic material completely reusable ordinary metal nickel plated spring clips accepts a variety of wire sizes (AWG: 20-29) dimensions: 2.6" x 6.85" x 0.33"

VELLEMAN Breadboard Jumper Wire 5.9" Male to Male 10pk 22awg, WJW010

$1.50
package contents: 10 pcs in plastic bag 5 colours: 2 x red, 2 x blue, 2 x yellow, 2 x green, 2 x black pre-cut, pre-stripped and pre-formed wires simplify and speed up prototyping work easy to connect and disconnect these wires are compatible with standard breadboards that have 0.1" grids type: male to male connector cable voltage: max. 30 V current: max. 3 A length: 15 cm (5.9") diameter: 22 AWG insulation material: PVC conductor material: copper

VELLEMAN Half-Size Breadboard - 400 Tie Points, VTBB3

$3.05
voltage: max. 30 V current: max. 3 A material: external body: external body is made of ABS internal interconnected clips: stainless steel base socket: 1 bus strip: 2 tie points: 400 14-pins IC capacity: 4 binding post: 0 dimensions: 82 x 55 x 8 mm weight: 39 g

VELLEMAN Jumper Wire Contact Pin Connector with Strain Relief 100pk, WJW007

$2.25
Create your own custom length jumper wires Crimp connector Accepts 22-26 AWG Snap fit plastic strain relief Copper connector 100 connectors and strain relief per package Also available in female  WJW008

VELLEMAN Pre-formed Jumper Wire Kit 350pcs, WJW351

$10.30
voltage: max. 30 V current: max. 3 A materials: wire: tinned copper wire jacket: PVC length: ± 4 to ± 125 mm American wire gauge: #22 AWG wire blister with: 25 pieces of 14 different lengths (350 pcs per case) colours: red - orange - yellow - green - blue - grey - white save time and enhance the lay-out of your PCBs comes in an attractive transparent box wires are pre-stripped (6.35mm/0.25") and bent under a 90° angle

DATAK Copper Sheets 3.25" X 10" (2 sheets), CF-3

$12.99
2 sheets  3.25" x 10" Self-adhesive 1oz copper .0016" thickness

DATAK Solder Type Protoboard 4 pack, 12-604

$5.52
4-Boards per package Solder type board with 176 copper donut pads - single sided (4) Mounting holes 1/8" diameter spaced 1.3" x 1.49" Board thickness: 1/16"

DATAK Solder Type Protoboard 3 pack, 12-606

$5.52
(3) Boards per package Solder type board with 285 copper donut pads - single sided on 0.10" centers 15 x 19 grid (4) Mounting holes are 1/8" diameter spaced on 1.6" x 2.0" centers Board thickness: 1/16"

DATAK Solder Type Protoboard 2 pack, 12-609

$5.52
Package of 2 560 copper donut pads in a 20 x 28 grid Copper solder pads are spaced on .100" centers Pads will accommodate small component leads, ICs and header pins (4) mounting holes 0.140" spaced 2.24" and 2.92" centers 1/16" board thickness

DATAK Solder Type Protoboard, 12-611

$1.95
1.7" x 2.9" Accommodates transistors and common passive components

DATAK Solder Type Protoboard, 12-617

$2.71
5.16" x 1.9" Accommodates circuits containing several IC's

DATAK Solder Type Protoboard, 12-628

$5.23
2-Boards per package Dimensions: 1.77" x 1.77" 221 pre-tinned copper donut pads on one side of the board Grid is 15 x 15 pads square (4) Mounting holes are 0.140" diameter on 1.54" centers Board thickness: 1/16"