Because our price on this item is lower than the manufacturer's
suggested retail price , the manufacturer does not allow us to show
you our price until you place the item in your shopping cart.
Adding this item won't require you to purchase the product. You
can easily remove the product from your cart if you decide not to buy it.
Integrated 3-channel professional audio mixer with volume and 2-band EQ on each channel
(2) XLR+1/4-inch combo inputs + stereo RCA and 1/8-inch inputs. Connect microphones, instruments, DJ mixers, controllers and more
Bluetooth-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
Bluetooth Link-Stream a stereo signal to separate speakers-no cables required
Bi-amplified design with (3) 6.5-inch low/mid woofers and a 1-inch high-frequency tweeter
XLR link output for use with additional loudspeakers and subwoofers
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
Crossover: 2 kHz
Maximum SPL: 134 dB peak, 131 dB continuous (dB SPL @ 1 m)
Frequency Response: 50 - 20 kHz (+/- 3 dB)
Frequency Range: 43 Hz - 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D): 25.7” x 16.6” x 15.4” / 652mm x 421mm x 392mm
Net Weight: 41.3 lbs. / 18.8 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB125 Bracket, TS215 Cover
Portable self-powered PA speaker
50 watts (peak) drives high-quality 6.5-inch woofer, 2-inch tweeter
Two Line/Mic channels with XLR/1/4” combo inputs
Streams music wirelessly from any Bluetooth-enabled device
NFC pairing and 1/8
Master Volume, Line Out and battery level indicator
Built-in rechargeable battery delivers up to 35 hours continuous use
USB charging port for phone, tablet or other device
Top panel storage tray for smartphones, keys, guitar picks, and more
Rugged design with built-in back handle for easy transport
Portable self-powered PA speaker
Power Output: 50 Watts peak, (25 Watts continuous power)
LF Driver: 6.5-inch (165.1 mm) woofer
HF Driver: 2-inch (50.8 mm) tweeter
Frequency Response: 90 Hz - 20 kHz
Connectors: (2) Line/Mic channels with XLR-1/4-inch (6.35 mm) TRS combination input, (1) 1/8-inch (3.5 mm) TRS/stereo Aux input, (1) 1/4-inch (6.35 mm) Line-Out, (1) IEC AC power
Controls: (2) Volume controls for Line/Mic channels, (2) Line/Mic selectors, (1) Volume control for Bluetooth® and Aux channels, Master Volume, Bluetooth® pairing button, Power on/off switch
Indicators: Power On, battery level, Bluetooth® pairing status.
Bluetooth®: Profile: A2DP, AVRCP, Range: Up to 100 feet / 30.5 meters
Bluetooth® Connection: Manual pairing or NFC
Battery Type: 12V, 2.8Ah SLA
Power: 100-240V AC, 50/60 HZ, 50W
AC Voltage Input/Fuse: 100-240V / T630mAL AC250V
Dimensions: (H x W x D): 13.3" x 13.2" x 10" / 338mm x 334mm x 254mm
Weight: 12.8 lbs. / 5.8 kg.
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M0 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Designed and tuned in the USA
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 54 - 20 kHz (+/- 3 dB)
Frequency Range: 48 Hz - 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB810 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D): 20.6” x 12.6” x 11.8” / 524mm x 320mm x 300mm
Weight Net Weight: 26.1 lbs. / 11.9 kg.
Design Origin: Designed and tuned in the USA
DISPLAY MODEL PRICE
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
12-inch (305 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability
Design Origin: Designed and tuned in the USA
Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 12-inch (305 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
Crossover: 2 kHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1 m)
Frequency Response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110-120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.9 lbs. / 16.3 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB125 Bracket, TS212 Cover
2000 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 3-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet output modes for ideal matching with companion speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use
Designed and tuned in the USA
Top Loading Programmable MP3/CD Player
Plays MP3/CD, CD, CD-R, CD-RW
BT Compatible Allows You to Play BT Enabled Devices
Built-in PLL FM Radio
Built-in Cassette Recorder
Auxiliary Input Jack for Use with External Audio Devices
LCD Display
Rod Antenna
Programmable Track Memory
Repeat One, All and Skip Functions
Bass Boost Function
Dynamic High Performance Speakers
AC/DC Operation
100-240V Dual Voltage
Battery Operation: 8 x D Batteries (not included)
Power Supply: AC: 100-240V Dual Voltage / DC: 12V (D x 8 Batteries)
Power Consumption: 25W
Operation Temperature: +5 C˚ ~ + 35 C˚
Frequency Range: FM: 87.5-108Mhz
Frequency Response: 125-4000Hz
Supported Audio Formats: MP3/CD- Audio
Auxiliary Input: 3.5mm
Designed to add Bluetooth functionality to audio devices
Allows non-Bluetooth-enabled systems and products to seamlessly pair with Bluetooth-enabled devices
Automatically searches for devices for connectivity
Transmits and receives wired or wireless audio
No APP or driver needed
Noise reduction and echo cancellation
Multi-band equalizer configuration
Supports voice prompts
Integrated Li-Type battery charger and supports 300 mA fast charge
Over-discharge/charge protection
Automatic Connection Memory for faster and easier Bluetooth connections
Power Supply: 5VDC 1AMP
Dimensions: 3.8” W x .6” H x 2.3” D
Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening are
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
6-Year Warranty (with product registration)
Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening are
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
6-Year Warranty (with product registration)
Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening are
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
6-Year Warranty (with product registration)
Great Katana tone in a highly portable amp
Rich, full sound that far exceeds other amps in its class
Authentic multi-stage analog gain circuit and three-band analog tone stack
Three versatile amp types: Brown, Crunch, and Clean
Built-in tape-style delay for warm ambience
Aux input for jamming with music from a smartphone
Phones/recording output with cabinet voicing
Runs on six AA-size batteries or optional AC adapter
High Output in an ultra-compact form factor
2000 Watt Class D amplifier module
12-inch, long-excursion driver; 6th order bandpass design
Intrinsic Correction™ tuning and loudspeaker management
Refined, professional appearance looks great in any application
Rugged painted wood enclosure for long life and lasting durability
Deployment in either vertical or horizontal positions with dual M20 speaker pole fittings
Optional KS-LOC security cover prevents unauthorized tampering of controls
Complete EASE & CAD information available online
Perfect for home studios, video-editing, gaming and mobile devices
Separate high- and low-frequency drivers with crossover
5-inch low-frequency driver in ported enclosure delivers rich, tight bass
1-inch silk dome tweeter provides smooth, clear highs
40W per channel output power; 80W total
High-density wood cabinets suppress unwanted resonances
Elliptical tweeter waveguide optimizes dispersion and stereo imaging
Carefully formed baffle radiuses reduce edge diffraction
Three channel mixer: line/mic 1, line/mic 2, and Aux
XLR, RCA, " and 1/8" connectors
2-Band (LF/HF) built-in EQ for each channel
Full Bluetooth capability for streaming input signals wirelessly (plus wireless linking of another Spectrum PA for stereo applications)
Built-in dual LED arrays provide brilliant light show
Five customizable lighting modes: Mood, Meter, Mix, Pulse, Party
Brightness control lets you adjust or disable LEDs
Custom Color Controleasily adjust the desired mix of Red, Green, and Blue lighting