Communication Products
2-way radios, scanners for police, fire and public service, CB radios and accessories. Let us help you help yourself. Call "You-do-it" Electronics Center if you need help deciding which model is right for you.
SPECO Weatherproof PA Speaker Horn 5" 8 Ohm 15W, SPC-5P
$19.90
Frequency Response: 300Hz ~ 15kHz
Max Power: 15W
Sensitivity: 105dB 1W/1M
Impedance: 8 Ohms
Size: 5" Diameter x 4-3/4" Length
Weatherproof ABS construction
Includes 10' cord with 3.5mm plug
Kenwood Earbud Headset for PKT-23K, KHS-33
$33.70
Earbud with Clip Mic & In-line PTT
Single 3.5mm jack to connect to compatible Kenwood radios
For use with PKT-23K
Kenwood D-Ring In-line PTT Headset, KHS-27
$24.90
D-Ring Ear Hanger with Clip Mic & In-line PTT
Dual Jacks fit all Kenwood 2-pin Radios
For use with TK-3230 & TK-3400U4P
KENWOOD Earbud In-line PTT Headset, KHS-26
$29.00
Earbud with Clip MIc & In-line PTT
Dual Jacks fit all Kenwood 2-pin Radios
For use with TK-3230 & TK-3400U4P
PANAVISE Magnetic Base - Black, 864 PANA
$18.99
Magnet holds up to 5 lbs. (2.3kg) in a vertical pull. Base is 2.75" (69.8mm) in diameter and 0.385" (9.8mm) thick
1/4-20 mounting stud
PANAVISE Tri-Foot Base or T-Bar Clip - Dual Option Mount, 6" - Black, 883-06
$31.99
6" (152.4mm) overall mount length
Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter]
Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails
Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation
Knob and tamper-resistant set-screw adjusting options included
1/4-20 mounting stud with lockring
PANAVISE Deluxe Camera Mount, 6" - Black, 827-06
$31.99
The world's most versatile camera mounts with twice the positioning power! The preferred choice for installations with demanding requirements.
6" (152.4mm) overall mount length
Both adjusting points have a full range of motion: 210� Tilt, 360� Turn & 360� Rotation
1/4-20 mounting stud with lockring
Shafts are machined aluminum alloy 0.875� (22.2mm) in diameter
Knob and tamper-resistant set-screw adjusting options included
Square mounting base for solid surfaces, 2.5� x 2.5� (63.5mm x 63.5mm),
with four 0.219� (5.56mm) holes on 2.0� (50.8mm) x 2.0� (50.8mm) layout
PANAVISE 3 inch Extension for 809 Series Suction Cup Mounts, 812-03
$10.99
Combine with PanaVise 809 Series Suction Cup Mounts to mount devices to your windshield
Adds extra versatility to all 809 series window mounts
Ideal for steeper pitched windshields
Adds 3" to overall mount length
Includes installation hex key
812-03 Extension installation instructions:(copy and paste into browser address bar) http://www.panavise.com/812-03.pdf
PANAVISE AMPS to 17mm ball adapter for Garmin, 767-GR2
$14.90
Adapter for your Garmin (NUvi, Zuma and C-Series) and any product compatible with a 17mm ball/socket.
Install this adapter on to your AMPS pattern device including PanaVise InDash Mounts, Pedestal and Flex Mounts.
Will also adapt to any 17mm diameter ball socket.
Works with most Motorola cradles
PANAVISE BarGrip Universal Phone Handlebar Mount, 13260
$39.90
Includes PanaVise BarGrip Handlebar Mount and Rokform Universal Mount
Rokform Universal Mount with 3M adhesive - mount any phone or tablet
PanaVise BarGrip Handlebar Mount fits round and oblong bars: 7/8" (min) to 1-1/4" (max)
Ideal for: bicycles, motorcycles, ATVs or any round or semi-round tube
Non-slip rubberized inserts
Internal structured ribs design for high-strength holding power
Fully Adjustable: 210 Degree Tilt, 360 Degree Turn and 360 Degree Rotation
Premium Materials: made of custom, engineered composites and light-weight aluminium
PANAVISE PortaGrip with Fixed Pedestal Mount, 15571
$39.99
Fixed mount with full articulation
Includes PortaGrip Phone Holder and 717-06 Pedestal Mount
See below for details
PANAVISE Mount w/Adjustable Head, 6", 322
$39.90
AMPS-compatible mounting plate is adjustable under the electronics
Rugged base features "split ball" for 90° Tilt, 360° Turn & Rotation.
6" (152.4mm) overall rise height
Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
Mounting plate features 210° Tilt, 360° Turn and Rotation with knob or set-screw adjusting option (both included)
5/8" (15.9mm) shafts are easily removed and are interchangeable with any 5/8" (15.9mm) shaft
Base can be locked into place with either knob or set-screw adjusting option (both included)
Knob or set-screw can be selected and installed on either side of the ball housing
Base footprint has four 0.219" (5.56mm) on a 4.23" (107.5mm) circle
PANAVISE Work Station Mount - Vesa 75MM Plate, 336-V75
$36.99
Fully adjustability, 90° Tilt, 360° Turn & 360° Rotation for precise screen positioning
Includes knob or set-screw adjusting options (not pictured)
Accepts any 5/8" (15.9mm) diameter shaft
Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg)
75mm VESA compatible mounting plate
Match with 6" stand (960-06) or 9" stand (960-09)
SLIMLINE Slimline 2000 Pedestal, 9", 717-09
$25.99
AMPS-compatible. Knob and set-screw adjusting options included.
Overall mount height (including shaft) is 9" (228.6mm)
210� Tilt, 360� Turn and 360� Rotation at both ends
Head plate is molded of durable glass fiber-reinforced composite plastic
Aluminum alloy shaft
Housings at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points
Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
Foot is molded of durable long glass fiber-reinforced composite plastic
Concave foot design evenly distributes the mounting load for maximum stability and eliminates �carpet float�
Foot measures 2.5� x 2.5� (63.5mm x 63.5mm)
PANAVISE Slimline Pedestal, 4", 727-04
$28.99
AMPS-compatible. Knob and set-screw adjusting option included.
Overall mount height (including shaft) is 4" (101.6mm)
210� Tilt, 360� Turn & 360� Rotation under the component
Aluminum, zinc and steel construction
Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 � (63.5mm x 63.5mm)
PANAVISE UniFlex Gooseneck Mount, 10", 797-10
$36.99
AMPS-compatible mounting plate with an adjusting point under the electronics.
Overall mount length (including the shaft) is 10" (254.0mm)
Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
Knob and set-screw adjusting options included
Double wound shaft, vinyl coated for heavy-duty protection
Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
Screw caps included for a finished look
PANAVISE Slimeline Small Foot Pedestal Mount, 12", 727-12SF
$29.90
Knob and Set Screw Adjustment
Features 210° Tilt, 360° Turn & 360° Rotation at both ends
Head plate is molded of durable glass fiber-reinforced composite plastic
Aluminum alloy shaft
Housing at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points
AMPS-compatible mounting pattern
Foot is molded of durable long glass fiber-reinforced composite plastic
Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)
PANAVISE Work Station Mount - Vesa 100MM Plate, 336-V100
$36.99
Full monitor adjustability for your desk or work station!
Fully adjustability, 90° Tilt, 360° Turn & 360° Rotation, for precise screen positioning
Includes knob or set-screw adjusting options (not pictured)
Accepts any 5/8" (15.9mm) diameter shaft
Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg)
100mm VESA compatible mounting plate
Match with 6" stand (960-06) or 9" stand (960-09)
PANAVISE Tri-Foot Base or T-Bar Clip - Dual Option Mount, 6" - White, 883-06W
$31.99
6" (152.4mm) overall mount length
Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter]
Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails
Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation
Knob and tamper-resistant set-screw adjusting options included
1/4-20 mounting stud with lockring
PANAVISE Universal Radio Mount, 90 tilt, 9", 950-09
$39.90
Rugged base features our famous "split ball" for 90° Tilt, 360° Turn & Rotation.
9" (228.6mm) overall rise height
Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
Maximum holding power: up to 10 lbs. (4.5kg)
Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
Base can be locked into place with either knob or set-screw adjusting option (both included)
PANAVISE Universal Radio Mount, 45-45 tilt, 9", 951-09
$39.90
Same "split ball" base, but with 45° tilt over center, 360° Turn & Rotation.
9" (228.6mm) overall rise height
Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
Maximum holding power: up to 10 lbs. (4.5kg)
Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
Base can be locked into place with either knob or set-screw adjusting option (both included)
PANAVISE T-Button Tipper with Adjustment Wheel, 674-101
$7.90
An Easy Mounting Solution for XM Satellite Radios
Specially designed plate for XM-style mounting
AMPS-compatible adapter plate converts any AMPS-compatible mount into an XM-style satellite radio mount!
Suitable for any XM satellite radio or electronics with a T-Button mounting system
Compatible with all similar systems
Made of durable glass fiber-reinforced composite plastic
PANAVISE T-Slot Adapter Plate, 670-A
$5.99
An Easy Mounting for XM Satellite Radios
Specially designed plate for XM-style mounting
AMPS-compatible adapter plate converts any AMPS-compatible mount into an XM-style satellite radio mount!
Suitable for any XM satellite radio or electronics with a T-Button mounting system
Compatible with all similar systems
Made of durable glass fiber-reinforced composite plastic
PANAVISE Action BarGrip Camera Mount, 13220
$32.99
Compatible with any camera: includes standard 1/4-20" ball and GoPro ball
Fits round and oblong bars: 7/8" (min) to 1-1/4" (max)
Non-slip rubberized inserts
Internal structured ribs design for high-strength holding power
Fully Adjustable: 210° Tilt, 360° Turn and 360° Rotation
Premium Materials: made of custom, engineered composites and light-weight aluminium
Ideal for: bicycles, motorcycles, ATVs or any round or semi-round tube
PANAVISE PortaGrip with AMPS Adapter Plate, 15575
$21.99
Includes PanaVise T-Slot to AMPS adapter plate
Attaches easily to any AMPS compatible mount using the included hardware
Rubberized indexed grippers and foam backed cradle wont scratch your device
Quick release button for easy phone access
Vertical low profile grips allow full access to touch screens
Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone
Ratcheted feet allow for access to data ports
Low profile design minimizes mount behind phone