Speakers

Items 1 to 36 of 77 total

Grid List

SPARKFUN Surface Transducer- large, COM-10975

$19.95
  • Dimensions: 50mm in diameter, 31mm tall
  • Weight: 260 grams (0.5 lbs)

SPARKFUN Surface Transducer- small, COM-10917

$9.95
  • Impedance: 85% Ohm
  • Resonant Frequency: 16 +/- 0.5 kHz
  • Max Operating Voltage: 12 Vpp
  • Frequency Response: 300-19000 Hz
  • Rated input: 1.0 W
  • Maximum input: 2.0 W
  • Operating Temperature: -20 to +60 C

 

ALTO Trusonic2 12" 2-Way Powered Bluetooth Speaker, TS212W

$349.00
  • 550W continuous, 1100W peak Class D power
  • 12-inch (304.8 mm) LF driver, 2.5-inch (63.5mm) high-temperature voice coil
  • 1-inch (25.4 mm) neodymium HF driver with precision waveguide
  • Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls
  • Bluetooth-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
  • Bluetooth Link-Stream a stereo signal to separate speaker...no cables required
  • Custom engineered high-efficiency class D amplifiers with passive cooling design

ALTO Trusonic2 12" 2-Way Powered Speaker, TS212

$299.00
  • Output Power: 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF)
  • Low Frequency: 12-inch (305 mm) woofer, 2-inch (51 mm) voice coil
  • High Frequency: 1-inch (25 mm) neodymium driver with precision waveguide
  • Maximum SPL: 127 dB peak, 124 dB continuous (dB-SPL @ 1 m)
  • Frequency Response: 53 Hz 20 kHz (+/- 3 dB)
  • Frequency Range: 46 Hz 22 kHz (-10 dB)
  • Coverage: 90 H x 60 V nominal
  • Connectors: (2) XLR + -inch combo jack mic/line inputs (1) XLR Mix Output
  • Power: AC Input: 100120/220240 V, 50/60 HzFuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
  • Dimensions (WxDxH): 14.04" x 13.80" x 23.28" / 357 x 351 x 591 mm

ALTO Trusonic2 10" 2-Way Powered Speaker, TS210

$249.00
  • Output Power - 1100W peak (700 LF + 400 HF) / 550W continuous (350 LF + 200 HF)
  • Low Frequency - 10-inch (254 mm) woofer, 2-inch (51 mm) voice coil
  • High Frequency - 1-inch (25 mm) neodymium driver with precision waveguide
  • Maximum SPL - 125 dB peak, 122 dB continuous (dB-SPL @ 1 m)
  • Frequency Response - 54 - 20 kHz (+/- 3 dB)
  • Frequency Range - 48 Hz - 22 kHz (-10 dB)
  • Coverage: 90 H x 60 V nominal
  • Connectors - (2) XLR + -inch combo jack mic/line inputs (1) XLR Mix output
  • Power - AC Input: 100-120/220-240 V, 50/60 Hz, Fuse: 100-120 V T6.3AL AC250V/220-240 V T3.15AL AC250V
  • Dimensions (WxDxH): 12.8" x 12.0" x 20.8" / 323 x 305 x 527 mm

 

ALTO Amplified Speaker 280 Watt 10", TX10

$169.00
  • 280 Watts peak / 140 Watts continuous power
  • Efficient Class-D power amp, bi-amplified
  • 10" LF woofer with 1.5" voice coil
  • 1" titanium diaphragm HF compression driver with 1" voice coil
  • Balanced XLR Mic/Line Input and Link Output
  • Precision electronic crossover
  • Integrated analog limiter and overload protection circuitry
  • Lightweight, portable design
  • Integrated 36mm speaker pole socket
  • Main or wedge monitor operation

QSC KSUB Cover, KSUB COVER

$99.99
  • Soft, padded cover made with weather resistant, heavy-duty nylon/Cordura material for Ksub with grille guard

QSC KSUB Dual 12" Active Subwoofer, KSUB

$1,079.99
  • Dual 12" subwoofer drivers
  • Maximum SPL 130 dB peak
  • Lightweight portable powered speaker with legendary QSC amplifier power and reliability
  • 1000-watt continuous Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Comfortable ergonomic handles
  • Rugged birch plywood enclosure
  • Threaded pole socket
  • Speaker mounting pole included (35 mm diameter, 26.4 in / 67 cm long, M20 thread)

QSC Tote Cover for K8, K8 TOTE

$69.99
  • Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura material for K8.

ALTO Trusonic2 15" 2-Way Powered Speaker, TS215

$349.00
  • Output Power - 1100W peak (700 LF + 400 HF) / 550W continuous (350 LF + 200 HF)
  • Low Frequency - 15-inch (382 mm) woofer, 2-inch (51 mm) voice coil
  • Maximum SPL - 129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
  • Frequency Response - 50 - 20 kHz (+/- 3 dB)
  • Frequency Range - 43 Hz - 22 kHz (-10 dB)
  • Coverage - 90 H x 60 V nominal
  • Connectors - (2) XLR + -inch combo jack mic/line inputs, (1) XLR Mix output
  • Power - AC Input: 100-120/220-240 V, 50/60 Hz, Fuse: 100-120 V T6.3AL AC250V/220-240 V T3.15AL AC250V
  • Dimensions (WxDxH): 15.6" x 14.1" x 25.7" / 396 x 357 x 652 mm

ALESIS Professional USB Audio Speaker System, M1A320USB

$99.00
  • 1 Speaker Pair
  • USB 1.1 audio interface
  • 16-Bit / 48 kHz recording and playback
  • Pro-grade 1/4" plugs and standard RCA jacks
  • TRS Headphone output
  • Two 1/4" phone jacks inputs
  • Stereo 1/8" TRS mini-jack input
  • Stereo RCA inputs
  • 1/8" TS output to passive speaker
  • Switchable power supply

ALTO Compact High Performance PA System, TROUPER

$199.00
  • Integrated 3-channel professional audio mixer with volume and 2-band EQ on each channel
  • (2) XLR+1/4-inch combo inputs + stereo RCA and 1/8-inch inputs. Connect microphones, instruments, DJ mixers, controllers and more
  • Bluetooth-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
  • Bluetooth Link-Stream a stereo signal to separate speakers-no cables required
  • Bi-amplified design with (3) 6.5-inch low/mid woofers and a 1-inch high-frequency tweeter
  • XLR link output for use with additional loudspeakers and subwoofers

ALTO Trusonic2 12" Powered Sub-woofer, TS212SUB

$499.00
  • 1250 watts of peak power output
  • Custom engineered high-efficiency Class D amplifiers with passive cooling design -no fan means the speaker runs cleaner, quieter and has greater long-term reliability
  • 12-inch high-excursion woofer
  • (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
  • Polarity Reverse, Full-Range Output and Extended LF controls
  • Electronic clip, thermal and transducer overdrive protection
  • Rugged, internally-braced front-ported plywood cabinet
  • Integrated 35mm speaker pole socket and M10 rigging points

ALTO Amplified Speaker 280-Watt 8", TX8

$129.00
  • 280 Watts peak / 140 Watts continuous power
  • Efficient Class-D power amp, bi-amplified
  • 8" LF woofer with 1.5" voice coil
  • 1" titanium diaphragm HF compression driver with 1" voice coil
  • Balanced XLR Mic/Line Input and Link Output
  • Precision electronic crossover
  • Integrated analog limiter and overload protection circuitry
  • Lightweight, portable design
  • Integrated 36mm speaker pole socket
  • Main or wedge monitor operation

VELLEMAN Speaker Sound Box, PCMP14U

$9.90
  • power: 2 x 5W
  • speakers: 2 x 2"
  • impedance: 8 ohms
  • frequency response: 80Hz - 18kHz
  • distortion: 1%
  • S/N ratio: 65dB
  • input sensitivity: 500mV
  • power supply: 9VDC/1A adapter (incl.) or 6 x 1.5V AA batteries LR6C (not incl.)
  • dimensions: 2 43/64" x 14 1/64"
  • weight: 53.6oz
  • operating temperature: -4°F - 113 °F
  • iPod/MP3 stereo speaker system for an optimal sound
  • with bass and tweeter boost circuit
  • play and charge the iPod at the same time
  • comes with 4 adapters for use with different iPod models
Sale KLIPSCH Powered Monitor Speaker Pair

KLIPSCH Powered Monitor Speaker Pair, R-15PM

Regular Price: $499.00

Your Price: $399.00

  • 1 x pair of RCA phono level inputs with switch for Phono/Line input versatility (Phono Pre-amp with ground screw terminal)
  • 1 x USB digital audio from a PC or Mac single RCA line level output for connection to sub. 
  • 1 x Digital optical
  • 1 x 3.5mm mini jack line level
  • Bluetooth® wireless technology
  • Full featured IR remote

ALTO 400 Watt Amplified Speaker with 4 Channel Mixer, KICK 12

$449.00
  • 4-channel mixer with stereo line inputs on each channel and an XLR input on Channel 1
  • 400 Watts peak power, 200 Watts continuous
  • True bi-amped design provides dedicated power to high and low drivers
  • 12” low-frequency transducer, 1” compression driver
  • Custom-tuned electronic crossover provides superb frequency response
  • Built-in Alesis digital effects processor with reverb, delay, chorus, and more
  • 256 effect presets: 16 effects with 16 variations each
  • Integrated folding steel kickstand provides the ideal monitoring angle
  • Level, effects, and high & low EQ controls on all four channels
  • Stereo RCA input for connecting MP3 players and other audio devices
  • Footswitch input allows instant activation or bypass of effects
  • 1/4" headphone output with dedicated volume control
  • Angled speaker baffle for the best sound projection into the listening area
  • Dual XLR and 1/4" Mix outputs
  • Ground Lift switch

ALTO 400 Watt Amplified Speaker with 4 Channel Mixer, KICK 15

$499.00
  • 4-channel mixer with stereo line inputs on each channel and an XLR input on Channel 1
  • 400 Watts peak power, 200 Watts continuous
  • True bi-amped design provides dedicated power to high and low drivers
  • 15” low-frequency transducer, 1” compression driver
  • Custom-tuned electronic crossover provides superb frequency response
  • Built-in Alesis digital effects processor with reverb, delay, chorus, and more
  • 256 effect presets: 16 effects with 16 variations each
  • Integrated folding steel kickstand provides the ideal monitoring angle instantly
  • Level, effects, and high & low EQ controls on all four channels
  • Stereo RCA input for connecting MP3 players and other audio devices
  • Footswitch input allows instant activation or bypass of effects
  • 1/4" headphone output with dedicated volume control
  • Angled speaker baffle for the best sound projection into the listening area
  • Dual XLR and 1/4" Mix outputs
  • Ground Lift switch

QSC K8 Powered Speaker, K8

$649.99
  • 1000-watt continuous Class D power modules in all models
  • 8" Woofer; 1.75" diaphragm compression driver
  • 105 conical DMT coverage
  • Maximum SPL 127 dB peak
  • Rugged ABS enclosures
  • 16-gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct
  • M10 rigging points
  • Eyebolt and yoke mount accessories available

QSC K12 Yoke Mount Kit, K12 YOKE

$129.99
  • Powder coated steel yoke for mounting the K12 vertically or horizontally to walls, beams, or other structures.

QSC Tote Cover for K12, K12 TOTE

$79.99
  • Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura material for K12.

QSC K10 Powered Speaker, K10

$699.99
  • 1000-watt continuous Class D power modules in all model
  • 10" Woofer; 1.75" diaphragm compression driver
  • 90 conical DMT coverage
  • Maximum SPL 129 dB peak
  • Rugged ABS enclosures
  • 16-gauge powder coated steel grille
  • Functions as a monitor wedge
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct
  • M10 rigging points
  • Eyebolt and yoke mount accessories available

QSC Tote Cover for K10, K10 TOTE

$79.99
  • Soft, padded tote made with weather resistant, heavy-duty Nylon/Cordura material for K10

QSC K10 Yoke Mount Kit, K10 YOKE

$119.99
  • Powder coated steel yoke for mounting the K10 vertically or horizontally to walls, beams, or other structures.