Selectors

13 Item(s)

Grid List

RUSSOUND Dual Source Speaker Selector In-Wall White, AB-1.2WHITE

$39.00
Connector(s): Detachable 4-pole color-coded snap connectors Dimensions in Wall Box: 1.0" (W) x 2.75" (H) x 1.75" (D), (2.5 x 7.0 x 4.5 cm) Max Wire Size: 14 AWG (1.9 mm) Power Handling: 150 watts RMS per channel

RUSSOUND Single Source Four-Pair Impedance Matching Speaker Selector, SS-4.2

$99.00
Connector(s): Spring terminals Frequency Response: 20 Hz - 20 kHz +/- 0 dB Max Wire Size: 12 AWG (2.4 mm) Power Handling: 100 watts per channel peak, 100 watts per channel RMS

RUSSOUND Dual Source Six-Pair Speaker Selectors with Volume Control, SDB-6.1

$399.00
Connector(s): Detachable 4-pole color-coded snap connectors Impedance Matching Type: Autoformer Max Wire Size: 14 AWG (1.9 mm) Power Handling: 150 watts RMS continuous per channell Speaker Impedance: 4 ohms Volume Control: 12 steps; total attenuation 42 dB Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch

RUSSOUND Dual Source Four-Pair Speaker Selector with Volume Control, SDB-4.1

$329.00
Connector(s): Detachable 4-pole color-coded snap connectors Impedance Matching Type: Autoformer Max Wire Size: 14 AWG (1.9 mm) Power Handling: 200 watts RMS continuous per channell Speaker Impedance: 4 ohms Volume Control: 12 steps; total attenuation 42 dB Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch

RUSSOUND Dual Source Two-Pair Speaker Selectors with Volume Control, SDB-2.1

$179.00
Connector(s): Detachable 4-pole color-coded snap connectors Impedance Matching Type: Autoformer Max Wire Size: 14 AWG (1.9 mm) Power Handling: 100 watts RMS continuous per channell Speaker Impedance: 4 ohms Volume Control: 12 steps; total attenuation 42 dB Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch

RUSSOUND E-Z Connector Speaker Terminal Block, EZB-8

$49.00
Connector(s): Removable screw down connectors Max Wire Size: Up to 12 AWG Power Handling: 150 watts RMS per channel Frequency Response: Flat

RUSSOUND Automatic Speaker Selector, AB-3.2

$139.00
Connector(s): Detachable 4-pole color-coded snap connectors Delay Range: 0-30 seconds Indicators: Power, Status Max Wire Size: 14 AWG (1.9 mm) Min Trigger Level: 15 mV Power Handling: 200 watts per channel into 8 ohms, 100 watts per channel into 4 ohms Power Requirement(s): 12 VDC 300 mA (US power supply included)

RUSSOUND Dual Source Two-Way Speaker Selector, AB-2.2

$79.00
Connector(s): Detachable 4-pole color-coded snap connectors Dimensions in Wall Box: 5.5" (W) x 2.875" (H) x 3.0" (D), (14.0 x 7.3 x 7.6 cm) Max Wire Size: 14 AWG (1.9 mm) Power Handling: 150 watts RMS per channel

VANCO Two Pair Stereo Speaker Selector Box with Volume Control, SS2V

$129.90
Distributes high level (amplified) stereo signals into two zones with built in impedance matching volume control Features the ability to switch up to two audio sources with independent source switch per zone Each zone features an ON/OFF switch to control each zone independently Removable and solderless connection terminals for easy installation High quality metal chassis with brushed black aluminum faceplate Accepts up to 14 gauge speaker cable 200 watts max power per channel 100 watts RMS per channel Dimensions: 10” W x 2.5” H x 6.5” D

VANCO 4 Pair Stereo Speaker Selector Box, SS4

$39.90
Low profile speaker selector unit that allows for distribution of high level (amplified) stereo signals into four zones. Features a manually activated impedance protection circuit that can be activated to prevent the impedance to a receiver- this protection keeps the receiver from dropping below 5 Ohms- regardless of the impedance rating of the speakers utilized Impedance protection can also be de-activated- allowing for part of a planned system of impedance with matching volume controls- resulting in great sound quality in every zone. Two Sets of Electrical Safety Devices for Safeguarding the Stereo Amplifier have been Installed to Protect the Stereo Amplifier Against Shorting of Lines and/or Open Speaker Connectors Rated 70 Watts Continuous per Channel 10 Ohm Impedance Accepts 14 to 18 AWG Speaker Wire Push-pin Terminal Connections Dimensions: 8.5” W x 1.8” H x 4.5” D

VANCO Four Pair Stereo Speaker Selector Box with Volume Control, SS4V

$219.90
Distributes high level (amplified) stereo signals into four zones with built in impedance matching volume control Features the ability to switch up to four audio sources with independent source switch per zone Each zone features an ON/OFF switch to control each zone independently Removable and solderless connection terminals for easy installation High quality metal chassis with brushed black aluminum faceplate Accepts up to 14 gauge speaker cable 200 watts max power per channel 100 watts RMS per channel Dimensions: 17” W x 2.5” H x 6.5” D

VANCO 6 Pair Stereo Speaker Selector Box, SS6

$59.90
Low profile speaker selector unit that allows for distribution of high level (amplified) stereo signals into six zones. Features a manually activated impedance protection circuit that can be activated to prevent the impedance to a receiver- this protection keeps the receiver from dropping below 5 Ohms- regardless of the impedance rating of the speakers utilized Impedance protection can also be de-activated- allowing for part of a planned system of impedance with matching volume controls- resulting in great sound quality in every zone. Two Sets of Electrical Safety Devices for Safeguarding the Stereo Amplifier have been Installed to Protect the Stereo Amplifier Against Shorting of Lines and/or Open Speaker Connectors Rated 70 Watts Continuous per Channel 10 Ohm Impedance Accepts 14 to 18 AWG Speaker Wire Push-pin Terminal Connections Dimensions: 17” W x 2.2” H x 4.4” D

ATLAS Impedance Matching 6-way Speaker Switch, AST-6A

$99.00
Automatic impedance-matching and on/off push-button control Dual-Amplified Source Switching Capability Control of four or six speaker pairs in multi-room or surround sound applications Compact, low-depth size is perfect for shelf or rack mounting