Hardware

Items 1 to 36 of 68 total

Grid List

ECLIPSE Staples for CP-392 Staple Gun - Round crown, CP-392-4

$3.82
Round crown staples 10-12mm (3/8"-1/2") 200 pcs/1box Material: Carbon Steel

ECLIPSE Staples for CP-392 Stapler - Flat Crown Staples, CP-392-3

$3.82
Flat crown staples 4-14mm (5/32"-9/16") 200 pcs/1box Material: Carbon Steel

ECLIPSE 200 Insulated Staples for CP-391 Staple Gun, CP-391-2

$9.99
Round Cable Height: 6~8mm Flat Wire Height: 4.5~6.3mm Width: Below 10.3mm

ECLIPSE 200 Insulated Staples for CP-391 Staple Gun, CP-391-1

$9.99
Round Cable Height: 4~6mm Flat Wire Height: 2.5~4.0mm Width: Below 8.0mm

VELLEMAN 12 Piece Aluminum Snap D-Ring Assortment, HAS09

$6.90
anodized finish, does not rust comes in assorted sizes and colours for easy identification not for climbing, lifting or safety devices colours: black, blue, red, silver diameter: 5.08 cm (2 inch) / 6.035 cm (2-3/8 inch) / 6.958 cm (2-3/4 inch) / 7.937 cm (3-1/8 inch) quantity / contents: 12 pieces set 2 x: 80 mm black 4 x: 70 mm red 2 x: 60 mm silver 4 x: 50 mm blue

VELLEMAN Lock Washer Assortment - 720 pcs, HAS03

$5.90
internal and external lock washers zinc-plated steel for rust resistance poly storage container with snap-lock lid

VELLEMAN Metric Nitrile O-Ring Assortment - 225 pcs, HAS02

$4.70
18 of the most used O-ring sizes in one organized PVC case nitrile rings resist heat, most petroleum and silicone fluids, hydraulic and non-aromatic fluids, and solvents metric sizes

SPARKFUN Plastic Standoffs (4-40; 3/8"; 10 pack), PRT-10461

$3.95
Nylon standoffs 3/8" long and tapped for a 4-40 screw Great for mounting your board in an enclosure, or just getting it up off the table\ Each standoff has an outer diameter of 6mm

ACTOBOTICS Hardware Pack A, 632146

$39.99
380pc kit A fifteen compartment plastic case is included for organized storage Uses 7/64" hex key