Wearables

29 Item(s)

Grid List

SPARKFUN LilyPad Design Kit, KIT-13927

$99.95
Sewable Electronics Projects: Project 1: Glowing Pin Project 2: Illuminated Mask Project 3: Light-Up Plush Project 4: Night-Light Pennant Kit Includes: 1x LilyPad E-Sewing ProtoSnap 1x LilyMini ProtoSnap 2x LilyPad Rainbow LED Strip 2x LilyPad Coin Cell Battery Holder - Switched - 20mm 1x LilyPad Parts Box 4x Felt Sheet - 9" x 12" 4x Felt Sheet - 9" x 6" 1x Pin Back 1x Elastic Cord - 12" 1x White Embroidery Thread 1x White Sewing Thread 1x Fiberfill Stuffing 1x Needle Set 2x Conductive Thread Bobbin - 30' (Stainless Steel) 2x Coin Cell Battery - 20mm (CR2032) 4x Printed Project Templates 1x LilyPad Sewable Electronics Kit Guide

VELLEMAN Medium Brightdot Circle LED, VMW108

$16.40
1 x medium BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! diameter: 47 mm (1.85 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Small Brightdot Circle LED 2-Pack, VMW107

$17.90
2 x small BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! diameter: 32 mm (1.26 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN ARC Brightdot LED Pack, VMW106

$14.75
2 x left BrightDot arcs 2 x right BrightDot arcs integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V dimensions (L x W): 32.5 x 6.5 mm (1.28 x 0.25 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Corner Brightdot LED Pack, VMW105

$9.90
2 x left BrightDot corners 2 x right BrightDot corners integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions (L x W): 14.25 x 6.5 mm (0.56 x 0.255 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Large Brightdot LED Pack, VMW104

$16.40
2 x tenfold BrightDot strips integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm soler or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V dimensions (L x W): 60.5 x 6.5 mm (2.38 x 0.25 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Medium Brightdot LED Pack, VMW103

$14.75
2 x fivefold BrightDot strips 2 x threefold BrightDot strips integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions threefold strip (L x W): 22 x 6.5 mm (0.87 x 0.25 inch) dimensions fivefold strip (L x W): 33 x 6.5 mm (1.29 x 0.25 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Small Brightdot LED 5-pack, VMW102

$11.45
5 x singleton BrightDots integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions (L x W): 11 x 6.5 mm (0.43 x 0.25 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.08 inch) required: or other Arduino compatible development board

VELLEMAN ESP32 Wearable Development Board, VMW101

$37.85
on board WiFi and Bluetooth® 8 x easy sewable pads: 4 x regular power pads 4 x capacitive touch-enabled pads 1 x on-board orange LED hall effect sensor temperature sensor ultra-low power analog pre-amplifier integrated LiPo battery charger dedicated reset button 2 × 8-bit DACs ultra-thin PCB Arduino compatible compatible with all BrightDot wearable LED boards based on the ESP32 SPI, I²S, I²C and UART interfaces the LED PWM, UART, I2C, I2S, and general purpose SPI functions can be configured to any GPIO 12-bit SAR ADC LED PWM (up to 16 channels) deep sleep mode to lower power consumption when preferable general purpose IO : 17 processors: CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS ultra low power (ULP) co-processor memory: 520 KB SRAM 448 KB ROM wireless connectivity: WiFi: 802.11 b/g/n Bluetooth®: v4.2 BR/EDR and BLE power management: max. current consumption: 300 mA deep sleep power consumption : 10 µA max. battery input voltage: 6 V max. battery charge current: 450 mA dimensions (W x L x H): 56 x 50 x 7.5 mm (2.2 x 1.97 x 2.95 inch)

VELLEMAN Brightdot Wearable Delevopment Board, VMW100

$69.90
Atmega32u4 @ 8 MHz native USB support 24 BrightDot addressable RGB LEDs (WS2812) ON/OFF switch reset button 1 user button 1 user LED PCF8523 RTC clock 10 GPIO sewable contacts and alligator clip friendly charging indicator LED RX/TX LED indication LEDs are mounted in a clock form free Arduino library included: an easy to use battery holder for 3 AA batteries (batteries not incl.)an easy to use battery holder for 3 AA batteries (batteries not incl.) USB 2.0 A to micro USB cable size: diameter: 8 cm (3,15 inch) height: 9 mm (3,54 inch) power supply: USB or battery powered max. battery supply voltage: 6 V current consumption: min. 20 mA, max. 1 A (when all RGB LEDs are on, software limited) battery or USB pass through output: max. 1 A (depends on battery and USB capacity) CPU speed: 8 MHz

VELLEMAN Atmega32u4 Wearable Lilypad Development Board, VMA105

$18.05
microcontroller: ATmega32U4 operating voltage: 2.7 - 5.5 VDC input voltage: 2.7 - 5.5 VDC digital I/O pins: 9 PWM channels: 4 analogue input channels: 4 DC current per I/O pin: 40 mA flash memory: 32 KB (of which 4 KB used by bootloader) SRAM: 2.5 KB EEPROM: 1 KB clock speed: 8 MHz diameter: 50 mm 100% compatible with Arduino® Liliypad

VELLEMAN Large Brightdot Circle LED, VMW109

$17.90
1 x large BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V diameter: 69 mm (2.7 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board