Maker & DIY Technology
"You-do-it" Electronics Center is your one stop shop for all your DIY maker projects. From component level to finished project, we have the parts you need. If you don't see what you're looking for, call or email us.
VELLEMAN Brightdot Power & Fuse Pack for Electronics Wearables, VMW111
$7.99
includes: fuse board
Vin connectors:
BAT1: soldering points for your own power connection
BAT2: JST Connector for standard LiPo battery and/or our Alkaline battery pack
Vout connector: JST
fuses:
fuse to protect the LED circuit
fuse to protect the development board
battery pack for 3 x AA batteries (batteries not incl.)
fuse board to development board cable
spare fuses (one of each type)
fuse board dimensions (W x L x H): 38 x 38 x 7.4 mm
fuse trip current LEDs: 500 mA
fuse trip current development board: 750 mA
fuse board max. forward voltage: 360 mV
VELLEMAN Corner Brightdot LED Pack, VMW105
$9.90
2 x left BrightDot corners
2 x right BrightDot corners
integrated backup line (this ensures that one broken LED does not affect the next LED)
each PCB has gold plated contacts with 6 sewing holes of 1.22 mm
solder or sew them!
dimensions (L x W): 14.25 x 6.5 mm (0.56 x 0.255 inch)
max. current consumption: 60 mA / LED at full brightness
power supply: 3.3 V - 5 V
PCB thickness: 2.1 mm (0.082 inch)
required: or other Arduino compatible development board
OSEPP Proto Shield, PROTO-01
$9.95
1316 0.1 pitch prototyping area
Two LEDs with the anode pin exposed (JC2, JC3)
Arduino Reset button
A User push-button with Pull-up (JC1)
BlueSMiRF header
OSEPP Micro SD Shield, MSDS-01
$12.95
5v+3v3 or 3v3 operation
1312 0.1 pitch prototyping area
Compatible with popular libraries
Interfaces over SPI with CS on pin 8
OSEPP 201 Arduino Basics Starter Kit, ARD-02
$99.00
Discover Arduino through EASY and FUN lessons
Step-by-step instructions with diagrams
No prior electronics knowledge required
Kit comes with everything you need to build 15 projects across 8 categories:
1. Temperature
2. Light
3. LEDs
4. Sound
5. Ultrasonic
6. Servo Motors
7. Stepper Motors
8. LCD
New
SPARKFUN IoT Power Relay (Voltage Controlled Relay), COM-14236
$39.90
Universal control voltage 3-60VDC or 12-120VAC
A single input signal switches four outlets: one normally on, one always on, two normally off.
Optical isolation, relay hysteresis and de-bounce protection add safety.
A large MOV clamps surges for clean 90-140VAC power.
The durable SPDT control relay is rated at 30/40A, >400,000 operations at 12A or 2 million+ operations at 5A.
A 12A thermal safety circuit breaker switch prevents overloads.
Mounting tab with two screw holes
Dimensions: 170mm x 95mm x 35mm (6.69in x 3.74in x 1.37in)
OSEPP JST 3 Pin Wire Assembly 6" 10pk, LS-00089
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
OSEPP JST 4 Pin Wire Assembly 6" 10pk, LS-00088
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
SPARKFUN XT60 Connectors - Male/Female Pair, PRT-10474
$1.90
Perfect for applications up to 65A continuous draw.Sold in pairs of 1 male and 1 female connector.
SPARKFUN Jumper Wire - 0.1", 3-pin, 6", PRT-10368
$1.90
There is a 3-pin JST RE connector on both ends.
These are simple jumper wires used on standard 0.1" breakaway headers.
Dimensions: 6" length
SPARKFUN Molex Jumper 2 Wire Assembly, PRT-09918
$1.90
There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end
It also comes with the mating connector for the Molex
Dimensions: 6" length
SPARKFUN JST-PH (2mm) 2-Conductor Pigtail w/ PCB Header, PRT-09914
$0.95
This is a simple two wire cable
Great for jumping from board to board or just about anything else
There is a 2-pin JST connector on one end, bare cable on the opposite end
It also comes with the mating connector for the JST
Dimensions: 6" length
PAN PACIFIC 40 Pin Single Row Header Strip 5pk, PLS-40S-P5
$4.90
.1" centered
Gold plated square pins
OSEPP Break Away Headers Straight 10pk, LS-00004
$8.75
Use with custom PCBs or general custom headers
Break or cut to fit
40 pins per roll
Pins are spaced by standard 0.1'
11.5 mm pin length
OSEPP Tank Mechanical Kit, TANK-01
$99.95
100% Arduino Compatible
aerospace grade anodized aluminum
corrosion resistant coating
Everything you see in image is whats included – ASSEMBLY REQUIRED
optional tires / belt accessories for wheels
Operating voltage output : 9 volts ( x6 AA Batteries)
100% compatible all OSEPP sensors
9v DC motors included
Suggested Accessories: OSEPP TB6612 Motor Driver and UNO Board
ACTOBOTICS 0.770" - 0.770" Pattern Adapter, 545440
$3.49
Standard Actobotics hole pattern
4 untapped holes and 4 tapped 6-32 holes
NTE EL Wire Red 2.3mm Diameter, 69-ELW2.3-RD
$9.48
Optimum Operating Voltage: 90 - 120VAC
Power Dissipation: 200mW
Standard 9.84 Ft. (3 Meter) Length with Pre-Wired Connector
Extremely Flexible, can be Bent, Knotted, Cut, Stretched, etc.
without Compromising the Lighting Effect
NTE EL Wire Orange 2.3mm Diameter, 69-ELW2.3-OR
$9.48
Optimum Operating Voltage: 90 - 120VAC
Power Dissipation: 200mW
Standard 9.84 Ft. (3 Meter) Length with Pre-Wired Connector
Extremely Flexible, can be Bent, Knotted, Cut, Stretched, etc.
without Compromising the Lighting Effect
NTE EL Wire 12VDC Cigarette Lighter Plug drives 0 - 5 meters, 69-ELDP-2
$9.48
Cigarette Lighter Plug in
DC Input: 12VDC
Output Power: 1.2W
Output (RMS): 180VAC
Optimal Load Length: 5 meters (16.4 feet)
NTE EL Wire 12VDC Cigarette Lighter Plug drives 0 - 3 meters, 69-ELDP-1
$5.06
Cigarette Lighter Plug in
DC Input: 12VDC
Output Power: 1.0W
Output (RMS): 130VAC
Optimal Load Length: 3 meters (9.84 feet)
NTE EL Wire AC Power Supply drives 0 - 30 meters, 69-ELD30
$24.90
AC Input: 110 - 250VAC
Output Power: 8.6W
Output (RMS): 115 - 136VAC
Optimal Load Length: 30 meters (98.43 feet)
SPARKFUN Piezo Element, SEN-10293
$1.90
Piezo elements come in handy when you need to detect vibration or a knock
You can use these for tap or knock sensors pretty easily by reading the voltage on the output
They can also be used for a very small audio transducer such as a buzzer
SPARKFUN Flex Sensor 2.2", SEN-10264
$11.95
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend)
Connector is 0.1" spaced and bread board friendly
OSEPP Piezo Sensor Module, PIEZO-01
$5.45
Wide supply voltage range: 3.3V to 5V
Digital output buzzer
Analog input sound pressure sensor
OSEPP Light Sensor Module, LIGHT-01
$3.95
Suitable supply voltage: +3 to 5Vdc
Analog voltage output: 0 to 5 Vdc
Detects ambient light density
Works with CdsPhotoresistor
Interface with microcontrollers and logic circuits Analog sensors
Uses PH 2.0 socket
Special sensor with Arduino expansion boards
OSEPP IR Follower, IRFOL-01
$7.95
100% Arduino Compatible
Can be used to build a light following robot
SPARKFUN Hall Effect Sensor - US1881, COM-09312
$1.20
3.5V to 24V DC operation voltage
Low current consumption
Temperature compensation
Wide operating voltage range
Open-Collector pre-driver
50mA maximum sinking output current
Reverse polarity protection
Lead Free Package: TO-92
NTE Precision Temperature Sensor, 7225
$1.71
Directly Calibrated in °K
1°C Initial Accuracy
Operates From 450μA to 5mA
Less Than 1Ω Dynamic Impedance Ab