Test Equipment

Whether it’s electrical, mechanical, maintenance, safety or environmental applications..."You-do-it" Electronics Center has the test equipment and accessories that you're looking for. If you don't see what you're looking for, call or email us.
Items 1 to 36 of 228 total

Grid List

EXTECH Autoranging Digital Megohmmeter, 380260

250V, 500V, and 1000V test voltages Insulation Resistance to 2000MOhm Lo Ohm function for testing connections Lock Power On Function for hands-free operation Data Hold to freeze displayed reading Complete with heavy duty test leads, alligator clip test lead, 6 x AA batteries, hanging strap and hard carrying case

VELLEMAN Digital Multimeter, DVM850BL

DMM with automatic polarity function and 3 ½ digit LCD display measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm diode, transistor and continuity test with buzzer data-hold function and backlight with protection holster CAT. II 600V

Velleman DMM Large Display with Temperature, DVM890F

Low-battery indication, overload protection and automatic deactivation DC current max. 20A, DC voltage max. 1000V AC current max. 20A, AC voltage max. 700V Resistance measurements: up to 20Mohm Capacitance measurements: from 2000pF to 20F Frequency measurements: max. range 20kHz Temperature test range: from 32F to 104F through built-in sensor K-type thermocouple measuring range: from -58F to 1832F

VELLEMAN Digital Multimeter with Data Hold/Diode Test/Batteru Test/Buzzer Function, DVM94

CAT. III 600 V 23 ranges DMM with automatic polarity indication and 3 1/2-digit LCD display resistance measurements: measurements: DC current up to 10 A, AC and DC voltage up to 600 V resistance up to 20 megohm transistor, diode and audible continuity test low-battery indication and data-hold function

EXTECH Electrical Test Kit: Digital Multimeter, NCV Detector and Outlet Tester, MN24-KIT

Kit includes: MN24 - Manual Ranging CAT II-600V MiniTec and trade; MultiMeter with 7 functions including 1.5V and 9V Battery tests under load 40130 - Non-Contact Voltage Detector. Detects AC Voltage from 100VAC to 600VAC without touching the source ET15 - Receptacle Tester for detecting faulty wiring in 3-wire receptacles and five wiring faults

Extech DMM with Temperature, MN35

AC and DC Voltage to 600V Resistance with Continuity Diode functions DC Current to 10A Temperature Battery Test Includes: protective rubber holster, 9V battery, test leads and Type K thermocouple probe

Extech DMM Autoranging with Temperature, MN36

Autoranging Includes: protective rubber holster, 2xAAA batteries, bead wire Type K temperature probe and test leads

EXTECH Mini Analog MultiMeter, 38073A

Easy to read color coded analog display Measure AC/DC Voltage, DC Current, Resistance and Decibel 4% full scale basic accuracy Battery test on 9V and 1.5V batteries Complete with test leads and 1.5V AA battery

ECLIPSE LCR Meter, MT-5211

3 1/2 digits LCD, Max. reading 1999 Inductance measurement : 2mH to 20H Capacitance measurement 2nF to 1000µF Resistance measurement: 200O to 20MO Low battery indication Data hold function

FLIR 400A AC Digital True RMS Clamp Meter with Type K, CM44

Accu-Tip enables more accurate amperage measurements on smallergauged wires MAX/MIN/AVG recording, and frequency and diode measurement Data hold, zero function, and low pass filter (VFD) for voltage measurement Durable to withstand a 2-meter drop, and operates at -10 to 50°C (14 to 122°F) Large, bright backlit display makes readings easy to see Tough, over-molded, easy-to-grip design and slim, portable size Built to accept up to a 30mm max conductor Electrical field detection (NCV) determines if voltage is present and the relative strength of the field for safety True RMS professional clamp meters

ECLIPSE Capacitance Meter, MT-5110

Easy and correct readout. High measuring accuracy. Measurements are possible even under a strong magnetic field. LSI-circuit provides high reliability and durability. Input overload protection is provided. LCD display for low power consumption and clear readout even in bright ambient light conditions. In-line pushbuttons allow one hand operation. Light-weight and compact construction for easy operation. Low battery condition is indicated on the LCD display.

ECLIPSE AC Clamp Meter, MT-3266

Comply with CE safety standards Portable and simple one-hand operation Display: 3 1/2 digits 1999 counts Max. jaw opening: 1.97"

FLIR True RMS Digital Multimeter with Type K Temperature, DM90

Measures Voltage, Current, Frequency, Resistance, Continuity, Diode, Capacitance, and Temperature  Features LoZ, VFD, uA measurement, Smart/Classic Diode modes Measures voltage up to 1000V AC/DC Powerful LED worklights eliminate need for flashlight in dim lighting Digital LCD display with bargraph, customizable, easy-to-use settings option menu, and onscreen programming menu navigation Min/Max/Avg, Peak Min/Max, Hold, Auto Hold, Auto Power Off with Disable Includes a built-in non-contact AC voltage detector Provides industry-leading Limited Lifetime Warranty Made tough for protection against splashing water (IP54 rating), and withstands a 3-meter drop

ECLIPSE Analog Multimeter, MT-2017

Complied with 2008 CE safety standard Double-sided glass epoxy PCB Mirrored Aluminum dial plate 20kO/V DC & 9,kO/V AC input sensitivity Overload and mis-used protection Adjustable back tilt device with hook-up design Robust protective holster alongside Resistance, Current & Voltage measurements 10 Amp DC Range, Transistor hFE Test Continuity Buzzer and Battery Test Zero-center meter (Null) Test leads, batteries, fuse and user's manual included Ideal for using in the fields of lab, school, home applications and more

EXTECH 200A AC/DC Mini Clamp Meter+Voltage Detector, MA120

Clamp meter with built-in AC Voltage detector and flashlight Measures 200A AC Current up to 100mA resolution 3% basic ACA accuracy 0.7" (18mm) jaw opening; 300MCM cable size 2000 count LCD display Non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip Built-in white LED flashlight Measures Frequency up to 1kHz with 0.01Hz resolution Autoranging with Auto Power Off and Data hold function

EXTECH 11 Function True RMS Multimeter + NCV, EX350

True RMS for accurate AC measurements 4000 count backlit LCD display Low Impedance (LoZ) prevents false reading caused by ghost voltages Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals Built-in non-contact voltage detector (NCV) with LED indicator Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode Test, Continuity Data Hold, Min/Max/Max-Min, Auto Power Off Relative Mode for Capacitance Zero and offset adjustment Complete with test leads and two AAA batteries

FLUKE 113 Digital Multimeter, FLUKE-113

VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity True RMS for accurate AC measurements on non-linear loads A large backlit display allows for easy visibility in low-lit areas Record signal fluctuations using the Min/Max function Diode test for testing general-purpose germanium, silicon, and power diodes Integral holster with probe holders for easy storage Auto and Manual ranging for added user functionality Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety

FLUKE 115 Digital Multimeter, FLUKE-115

Large white LED backlight to work in poorly lit areas Resistance and continuity Frequency and capacitance Maximum Voltage ac/dc 600V 10A ac/dc current measurement (20 A overload for 30-seconds max) Min/Max/Average to record signal fluctuations CAT III 600 V safety rated

FLUKE 117 Electrician's Digital Multimeter, FLUKE-117

VoltAlert technology for non-contact voltage detection AutoVolt automatic AC/DC voltage selection Low input impedance: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas True RMS for accurate measurements on non-linear loads Measures 10 A (20 A overload for 30-seconds) Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation CAT III 600 V safety rated

VELLEMAN 3 in 1 DMM and Power Supply and Soldering Iron, LAB1U

digital multimeter: 3 1/2 backlit LCD automatic polarity indication DC voltage: 200mV to 600V in 5 steps AC voltage: 200V and 600V DC current: 200µA to 10A in 5 steps resistance test: 200 ohm to 2Mohm diode, transistor and continuity test data-hold function and buzzer CATI 600V CATII 300V regulated power supply: selectable output voltages: 3 - 4.5 - 6 - 7.5 - 9 - 12Vdc output: 1.5A (2A peak) LED overload indication with output on/off switch very low ripple LED power indication soldering station: low-voltage iron: 24V ceramic 48W heating element with temperature sensor temperature range: OFF - 302 - 842°F lead-free soldering possible supplied with sponge and spare bit

FLUKE Rugged Digital Multimeter Waterproof, FLUKE28II

Measure up to 1000 V AC and DC Measure up to 10 A (20 A for 30 seconds) 10,000 μF capacitance range Frequency to 200 kHz Extended AC voltage bandwidth– 15 Hz to 20 kHz Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument Resistance, continuity and diode test Min/Max and average recording to capture variations automatically Peak min-max Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments Designed to withstand 3 meter drop (with holster) Hi resolution 20,000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals New – Backlit keypad buttons allow for easy visibility in lowlit areas Large display digits and 2 level bright white backlight for increased visibility Reversible holster for added protection when not in use Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards Long battery life (800 hours) Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum flexibility Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks MSHA approval

FLUKE AC/DC Current Clamp 400A, I410

Battery-powered Hall-effect probe measures 1A to 400 A 1mV/Amp output guarantees easy reading on your meter Take accurate current readings without breaking the circuit Maximum conductor Ø 32 mm CAT III 600 V safety rating

EXTECH True RMS Graphical MultiMeter with Bluetooth, GX900

Integrated Bluetooth® connects with most Android devices to transmit readings for remote viewing Works with free Android App to display large, easy-to-read values up to 30ft (10m) away Low Pass Filter conditions the inputs to provide accurate Voltage and Frequency readings on motors, drives and other large electrical equipment that generate electrical noise Datalogging stores up to 2500 readings with date and time stamp Windows® compatible software included for wireless transfer of logged data or recording data in real time True RMS measurements for accurate AC Voltage and Current measurements Dual sensitivity frequency functions Peak Hold (>1ms) Min/Max/Average / Relative (%) / Data Hold / Automatic Data Hold / Auto power off Backlit graphical dot matrix display allows for customized screens to optimize critical data within a measurement mode and provide visual menus for easy navigation to settings and ranges Complete with double molded test leads, hanging strap, Type K bead wire temperature probe, PC software, and six AA batteries

EXTECH 600A True RMS AC Clamp Meter + NCV, EX650

True RMS for accurate AC measurements 1.18" (30mm) jaw size accomodates conductors up to 350MCM 6000 count backlit LCD display Low Impedance (LoZ) prevents false reading caused by ghost voltages Built-in non-contact voltage detector (NCV) with LED indicator Built-in LED flashlight for working in dimly-lit areas Functions include: NCV, AC/DC Voltage, AC Current, AC/DC micro Current, Resistance, Capacitance, Diode Test, Continuity Data Hold, Min/Max, Relative function, Auto Power Off Complete with test leads and 3 AAA batteries

TRIPLETT Compact DMM with Backlit Display & Temperature Test, 1101-B

19 measurement ranges 3 digit resolution 1999 count backlit display Auto power off Low battery indicator Auto polarity Temperature range Resistance range DC current range Shock absorbing case Overload protection Double insulated Built-in stand Voltage range up to 600V

TRIPLETT Compact DMM with Temperature Test, 1201

21 measurement ranges 3 digit resolution 1999 count backlit display Auto power off Low battery indicator Auto polarity Temperature range Resistance range DC current range Shock absorbing case Overload protection Double insulated Built-in stand Voltage range up to 600V

EXTECH 8 Function True RMS Multimeter with NCV, EX360

Electrical Multimeter with Non-Contact Voltage Detector Ideal for Electrical application True RMS for accurate AC measurements 6000 count white LED backlit display Functions include: NCV, AC/DC Voltage, Resistance, Capacitance, Frequency, Diode Test, Continuity Fast 60-segment Analog Bargraph for viewing trends LoZ prevents false readings caused by ghost voltages Built-in Non-contact AC Voltage Detector (NCV) with Hi/Low ranges and LED indicator Smart Data Hold, Peak Hold, Auto Power off Complete with test leads, 9V battery, holster with tilt stand and built-in magnet

EXTECH 10 Function Heavy Duty Industrial MultiMeter Waterproof, EX503

Averaging DMM with 4,000 count large LCD display and waterproof housing Averaging DMM with 10 functions and 0.5% basic accuracy AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity Dual sensitivity frequency functions (electrical/electronic) 1000V input protection on all functions 10A max Current Data hold, Relative, Auto power off 4,000 count large backlit LCD Double molded housing for waterproof protection Complete with double molded test leads, magnetic hanging strap, carrying case and 9V battery

EXTECH DMM True RMS Autoranging, EX205T

AC/DC Voltage Resistance Diode Test Continuity Product has a CAT III-600 Volt safety rating