13 Item(s)

Grid List

VELLEMAN Mini USB Function Generator, PCGU01

dedicated Windows® software to control the various signals (free download) software includes an automated wave sequence generator design enclosure test leads free software download USB cable DAC resolutions: 10 bits frequency range: sine, triangle form 1 Hz to 1 MHz, square wave 1 Hz to 100 kHz frequency setting resolution: 0.04 Hz sweep function amplitude range: 200 mVpp to 10 Vpp @ 1 kHz // no load / 0 V offset amplitude range with offset: 200 mVpp to 7.5 Vpp @ 1 kHz // no load / -2.5 V to +2.5 V offset offset range : from 0 to -2.5 V or +2.5 V max. (resolution 0.5% of full scale) waveforms: sine, square and triangle typical sine wave distortion (THD): < 0.02% @ 1 kHz / 0 dB / 600 Ohm square wave rise/fall time: < 0.2 µs output impedance: 50 Ohm note: PC USB ground is connected to GND output minimum system requirements: Windows® XP, Vista, 7, 8, 10 mouse or touchpad free USB port 1.1 or 2.0

BK PRECISION 100 MHz, 1 GSa/s, 2-Ch Digital Storage Oscilloscope, 2190E

100 MHz bandwidth, 1 GSa/s sample rate Large, 7” widescreen color display with 800 x 480 resolution offers a significantly larger viewing area than typical economy oscilloscopes (5.7”) 32 automatic measurements FFT plus four additional math functions Versatile triggering capabilities including pulse width, line-selectable video, slope, and alternating trigger Advanced tools include digital filter with adjustable limits, pass/fail testing, and waveform recorder mode 12 different language user interfaces and context sensitive help Special EDU mode allows educators to disable Auto set button, Measure menu, and Cursors menu PC software that lets you remotely control the digital storage oscilloscope and capture, save, and analyze waveform data Front panel USB host port for saving and recalling waveform setups, data, and screen shots from the oscilloscope on to a USB flash drive LAN and USBTMC compliant USB device port supporting SCPI commands for remote PC control GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)

VELLEMAN Mini 2 Channel USB Signal Scope, PCSU02

oscilloscope: bandwidth: DC to 2 x 500 kHz ±3 dB input impedance: 100 kO /20 pF maximum input voltage: 30 V(AC + DC) time base: 5 µs to 500 ms per division input range: 100 mV to 5 V/division input sensitivity: 3 mV display resolution readouts: true RMS, dBV, dBm, p to p, Duty cycle, Frequency… record length: 2 x 1k samples sampling frequency: 50 Hz to 2.5 MHz sample history function auto set-up function pre-trigger function: on 50 µs/div .. 500 ms/div ranges persistence options: colour graded, variable and infinite spectrum analyser: frequency range: 0 .. 125 Hz to 125 kHz operating principle: FFT (Fast Fourier Transform) FFT resolution: 512 lines transient recorder: timescale: 20 ms/div to 2000 s/div max. recording time: 9.4 h/screen automatic storage of data record and display of screens max. number of samples: 100/s min. number of samples: 1 sample/20 s general information: markers for: amplitude/voltage and frequency/time input coupling: DC and AC 8 bit resolution storage of display and data dimensions: 85 x 40 x 14 mm minimum system requirements: Windows® XP, Vista, 7, 8 and 10 mouse (or mouse pad) free USB port 1.1 or 2.0

VELLEMAN Handheld Personal Scope with USB Connectivity 12MHz Bandwidth 40MHz Sampling, HPS50

galvanically separated USB output for PC data or bitmap download to PC different screen modes normal screen view wide screen with DVM normal screen with large DVM wide screen with large DVM USB PC Connection real-time and screen capture includes: worldwide charging adaptor insulated measurement probe x1 / x10: PROBE60S USB cable Handheld Personal Scope power supply: Li-ion battery: 7.4V / 1050mAh

VELLEMAN LCD Oscilloscope Educational Kit, EDU08

high contrast LCD: 64 x 128 pixels with white LED backlight maximum sample rate: 1MS/s for repetitive signals, 100kS/s in real time input amplifier bandwidth: 200kHz (-3 dB) measurements can be performed up to: 100kHz input impedance: 100kohm // 20pF maximum input voltage: 30Vpeak (AC + DC) input coupling: DC and AC AD resolution: 8 bits run modes: run, single trigger level adjustable: in 16 steps timebase range: in 15 steps, 10µs/division to 500ms/division input sensitivity range: in 6 steps, 100mV/division to 5V/division test output: 1.95kHz / 3.3Vpp full auto set up for: Volt/div and time/div (or manual) sensitivity down to 10mV readouts: DC, AC+DC, true RMS, dBm, Vpp, min. & max. time and voltage markers readout frequency readout (through markers) battery operated: 4 x AAA batteries (max. 100mA) power save mode dimensions: 80 x 115 x 40 mm / 3.14 x 4.52 x 1.57" weight: 190g (6.70 oz) with batteries Note: This scope cannot be used to perform measurements on voltages higher than 30 vpp.

VELLEMAN Oscilloscope Educational Electronic Kit, EDU06

signals: alternating current (AC) adjustable AC full- and half wave rectified AC smoothed direct current (DC) ripple astable oscillator assembled and tested, no soldering required power supply: 9...12 VAC / min. 100 mA (not incl.) dimensions: 116 x 74 x 24 mm / 4.6 x 2.9 x 0.9"

VELLEMAN Mini USB Signal Scope, PCSU01

Turn your PC into a digital oscilloscope, spectrum analyzer and transient recorder Portable and easy to use - simply plug into your computer via the included USB cable Select between Expert or Basic mode in software Stores display graphs and data Sample history function Auto set up function

VELLEMAN Handheld Oscilloscope, HPS140MK2

Manual or auto set up function Probe x10 readout options Memory hold & storage function Time & voltage markers readout Monochrome OLED Full auto range option Direct audio power measurement

EXTECH 20MHz 2-Channel Digital Oscilloscope, MS420

Dual-channel Oscilloscope with 3.8" (97mm) color LCD display Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms Peak Detect function for 50ns glitch capture XY Mode and FFT function to view component frequencies Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more Waveform Math: Add, Subtract, Multiply, and Divide Average Mode for smoothing waveforms Persistence Mode for observing dynamic signals Store and recall up to 4 waveform screens and setups USB interface and software for transferring waveforms and data

VELLEMAN USB-PC Scope and Generator, PCSGU250

A complete USB-powered lab-in-a-box Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter Allows you to create your own waveforms using the integrated signal wave editor markers for: amplitude/voltage and frequency/time input coupling: DC, AC and GND Supply from USB port (500mA) dimensions: 8.2 x 2.2 x 7"

VELLEMAN Raspberry Pi Oscilloscope and Logic Analyzer Shield, VM205

oscilloscope: maximum sample rate : 1MS/s input amplifier bandwidth : 200kHz (-3dB) measurements can be performed up to: 100kHz input impedance : 100kohm // 20pF maximum input voltage: 30Vp (AC + DC) input coupling: AC+DC AD resolution: 8 bit record length: 800 samples run modes: Run, Single trigger level adjustable: in 254 steps timebase range: in 15 steps 5µs to 200ms/division input sensitivity range : in 6 steps, 100mV/division to 5V/division input sensitivity: 3mV display resolution time and Voltage markers readout frequency readout (through markers) logic analyzer: Number of channels: 10 record length: 10x800 samples Maximum sample rate: 1MS/s max. input voltage: 5VDC

Velleman Insulated Scope Probe 60MHz, PROBE60S

Complete probe set Cable length: 4ft Safety: conform with IEC-101, Cat II attenuation: 1:1 or 1:10

Velleman Insulated Scope Probe 100MHz, PROBE100

Complete probe set Cable length: 4ft For measurements up to 100MHz attenuation: 1:1 or 1:10 Safety: conform to IEC-1010 cat II