Mixers & Media Players

Items 1 to 10 of 29 total

Grid List

ROLLS Splitter/Combiner/Isolator, MS20C

$59.00
Input Impedance: XLR: 600 Ohms, 1/8" (3.5mm): 10K Ohms Output Impedance: 600 Ohms Frequency Response: 35 Hz - 20 kHz Max Level: +26 dBm Dimensions: 3" x 2.25" x 1.2" Splits balanced XLR input, or 1/8" input to two balanced XLR Combines two balanced XLR signals to one XLR output. NOTE: Will only pass phantom power to one microphone. One signal is transformer isolated from the other. Ground Lift switch for noise elimination

ROLLS Podcast Pro Mic/Source Passive Mixer, DB227

$89.00
Mixes one XLR microphone and a source signal to a single XLR microphone level output Passive unit does not require a power source so it can be used anywhere Switchable mixing for quick operation Single source level control for proper attenuation of the source inputs

ROLLS Mini Mix 2 Channel Mixer, MX22S

$69.90
CH1 Max Gain: 32 dB Power: 15 VDC 500 mA CH2 Max Gain: 20 dB CH1 Input Impedance: 10 Ohms CHI Input Impedance: 20K Ohms Output Impedance: 50 Ohms 1/8" and RCA line level signals Dual RCA Stereo output Individual controls for each channel Size: 2.75" x 2.35" x 1.5" (7 x 6 x 3.8cm)

ROLLS Live Mix 2 Channel Mic Mixer, MX34C

$129.00
Input Impedance: Mic - 600 Ohms or greater (XLR), Aux - 47K stereo (3.5mm) Output Impedance: 50 Ohms THD + Noise: .02% S/N Ratio: 110 dB Frequency Response: 20 Hz - 30 kHz (+0 / -1 dB) Max Output Level: + 14 dB Max Input Level: +20 dB Max Gain: +70 dB Batteries: 2 X 9V Alkaline Current Draw: 30 mA Phantom Power: +18 VDC Input Connectors: 2 Female XLR, 1/8" (3.5mm) Output connectors: 3.5mm Stereo Main Out, 3.5mm Headphone DC Power Jack: (5.5mm X 2.1mm Tip Negative) 9V Battery or AC adapter operation 2 Mic Inputs +18VDC Phantom Power 3.5mm Stereo Output 3.5mm Stereo Headphone Output Pan control on each channel Auxiliary 3.5mm Input 3.5mm mic in jack for headset or other mic Size: 6.3"w x 3.7"d x 1.4"h

ROLLS 4 Channel Stereo Mini Mixer, MX42

$69.00
Input Impedance: 10K to 47K Ohms Output Impedance: 2.5K to 10K Ohms Gain: -12 dB MAX 4 Stereo RCA inputs Passive, the unit requires no power. Dimensions: 3" x 2" x 1.42" (W x H x D)

ROLLS 4 Channel Mini-Mix 2, MX51S

$74.99
Power: ROLLS PS27s adapter CH 1 Gain: 32 dB XLR jack (highest gain) Phantom Power: for CH 1 microphone XLR Ch2 Gain: 26 dB 1/8" and RCA Ch 3 and 4 Gain: 26 dB each RCA Output: 1/8" stereo and stereo RCA S/N Ratio: >90 dB THD: <.008% IMD(SMPTE): <.008% Input Impedance: 10K Ohms unbalanced each jack For mixing a microphone XLR input with up to three RCA input signals XLR phantom power available. Four channels total Line / Headphone output level ROLLS PS27 AC adapter included Stereo RCA Line-Level Output Size: 3" x 5" x 1.25" (8 x 13 x 3.2 cm)

ROLLS Professional 6 Channel Bluetooth Audio Mixer, RM169

$229.00
Input Impedance: Mic: 600 Ohms XLR balanced Source: 22K Ohms RCA Mic Insert: 22K Ohms 1/4" TRS insert Weight: 5 lbs. (2.3 kg) Size: 19" x 1.75" x 4" (48.3 x 4.5 x 10 cm) Max Gain: Mic: 60 dB Source: 26 dB Tone Controls: /-12 dB 100 Hz Bass, /-12 dB 11kHz Treble Noise Floor: - 80 dB, THD: <.025% Output Impedance: 51 Ohms Output Level: 17 dBV max Phantom Power: 15 VDC In/Out Connectors: 5: XLR, 5: Stereo RCA, 1: 1/4" TRS, 2: 3.5mm Headphone Output Impedance: > 8 Ohms Max Input Level: Mic: -14 dBV Mic level Source: 24 dBV Current drain 100ma 15vdc Two XLR Microphone Inputs (including a paralleled front panel input). Individually switchable phantom power. Four Stereo Source Inputs, Four RCA and one front panel stereo 3.5mm. 1/4" TRS Mic Insert jack. Stereo RCA and XLR Outputs. Headphone output on front panel with volume control. level control for Bluetooth input signal.

ROLLS 3 Channel Mic Mixer/Combiner, MX310

$119.00
Input Impedance: 600 Ohms Output Impedance: 600 Ohms Mic - 200 Ohms line THD Noise: .05% Typical Frequency Response: 20 Hz - 20 kHz ( 0 / -3 dB) Voltage Gain: 50 dB line/10 dB Mic Low Cut: -3 dB @ 100 Hz Current Draw: 20 mA Phantom Power: 15 VDC Maximum Supply Voltage: 16 VDC Size: 5.25" x 3.75" x 1.5"

ROLLS Pro Mix Plus 3 Channel Mic MIxer, MX54S

$149.00
Input Impedance: 600 Ohms Output Impedance: XLR 600 Ohms THD + Noise: .02% S/N Ratio: 84 dB Frequency Response: 25 Hz - 16 kHz (+0 / -3 dB) Max Output Level: + 14 dB Max Input Level: -14 dB Max Gain: +60 dB Low Cut: -3 dB @ 100 Hz Current Draw: 20 mA Phantom Power: +18 VDC Connectors: 3: Female XLR, 2: Male XLR, 1: 1/4" TRS, DC Power Jack Current drain 15ma nominal one mic 15vdc Mixes three microphones to stereo XLR outputs Output level controls for mic or line-level output Transformer isolated outputs Phantom Power and Low-Cut switches for each Mic input Battery and AC powered Handy shoulder strap mounts Switchable Low Cut filter (100 Hz high pass) for each channel Size: 5.3" x 3.7" x 2"

ROLLS XLR Distribution Amp 8 Channel Mono/4 Channel Stereo, RA163

$189.00
Input Impedance: 100 K Ohms balanced Max Input Level: +24 dBV I/O Connectors: XLR Output Impedance: 50 Ohms balanced Max Output Level: +24 dB Max Gain: 20 dB S/N Ratio: >90 dB Frequency Response: 10 Hz - 40 kHz, +/- 1 dB THD: <.008% Power: 120 VAC 50-60 Hz, 15VA Mono or Stereo Operation - mono input to eight outputs, or stereo inputs to four stereo outputs. +20 dB Gain switch. All XLR jack inputs and outputs. Size: 19" x 1.75" x 6.5" (48 x 4.5 x 17 cm)