Leaded

Find flux-core wire for soldering and reworking electronics projects at “You-Do-It” Electronics Center. Save time and money with flux-core solder wire because the flux inside the wire removes oxides and prevents build-up of new oxide thereby eliminating the need for an additional flux procedure. Choose from a variety of flux-core solder wires and select the preferred type for your application. Check with the knowledgeable staff at “You-Do-It” Electronics Center for answers to any questions.
20 Item(s)

Grid List

MG CHEMICALS Structural Epoxy Adhesive, 9200-25ML

$14.25
Toughened, smooth, thixotropic paste 1:1 mix ratio Working life: 30 minutes Cure time: 24 hours at room temperature Non-sagging and gap filling Very strong adhesion Bonds dissimilar materials Highly resistant to vibration and temperature cycling Extreme chemical resistance Low shrinkage Easy to dispense

MG CHEMICALS Low Temperature Solder Paste T3 SN42/BI57/AG1, 4902P-15G

$11.95
Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements Flux meets J-STD-004B Excellent fine pitch printing capability Long operational life - non-slumping Good wettability

MG CHEMICALS Sn63 / Pb37 Leaded Solder .032, 4880-18G

$4.45
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn60 / Pb40 Leaded Solder .062, 4898-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS No Clean Flux Paste in Syringe, 8341-10ML

$10.95
Excellent wettability No clean Non-conductive, Non- tacky residues Compatible with Lead free & Leaded Solder Systems Thixotropic paste RoHS compliant

MG CHEMICALS RA Rosin Flux Paste, 8342-50G

$7.95
Works well with Leaded or Lead free solders Solder touch up Surface mount assemblies rework or repair Can be applied by dipping or brush / cotton swab spreading Uses Premium Grade RA Flux Excellent wettability High tack force Long tack time Zinc Chloride or Ammonium Chloride FREE Residue can easily be removed with Cat. #824 Isopropyl Alcohol or Cat. #4140 Flux Remover Complies with IPC ANSI-J-STD-004 ROH1 RoHS compliant

MG CHEMICALS Liquid Rosin Flux, 835-100ML

$9.95
For leaded and lead free soldering Fully activated Offers superior fluxing ability Instant wetting RoHS Compliant

MG CHEMICALS Rosin Flux Pen, 835-P

$9.45
Fast wetting Non-corrosive Non-hygroscopic Halide free RoHS compliant Controlled application

MG CHEMICALS Sn60 / Pb40 Leaded Solder .05, 4897-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn60 / Pb40 Leaded Solder .04, 4896-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn63 / Pb37 Leaded Solder .025, 4884-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn63 / Pb37 Leaded Solder .032, 4885-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn63 / Pb37 Leaded Solder .04, 4886-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn63 / Pb37 Leaded Solder .05, 4887-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn63 / Pb37 Leaded Solder .062, 4888-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn60 / Pb40 Leaded Solder .032, 4890-18G

$4.45
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn60 / Pb40 Leaded Solder .025, 4894-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F

MG CHEMICALS Sn60 / Pb40 Leaded Solder .032, 4895-227G

$21.95
RA Flux Core Solder Meets J-STD-004 / J-STD-006 Non-corrosive and electrically non-conductive flux residue Standard Flux Core percentage at 2.2% Solder Melting Point: 183C / 361F