Chemicals & Adhesives
When you think of chemicals for electronics, think of "You-do-it" Electronics Center. Cleaners, lubricants, dusters, freeze sprays, coatings, solvents, shielding and more. If you don't see what you're looking for, call or email us.
MG CHEMICALS Sn60 / Pb40 Leaded Solder .025, 4894-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Thermal Conductive Epoxy 6ml, 8329TCM-6ML
$21.95
Excellent 1.36 W/(mK) thermal conductivity
Easy 1:1 mix ratio
Adheres to most electronic substrates
Stores and ships at slightly below room temperature no freezing or dry ice required
Very long shelf life of at least two years even when stored at room temperature
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
MG CHEMICALS Thermal Conductive Epoxy 6ml, 8329TCS-6ML
$22.45
Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
Excellent 1.44 W/(mK) thermal conductivity
Easy 1:1 mix ratio
Adheres to most electronic substrates
Stores and ships at slightly below room temperature no freezing or dry ice required
Very long shelf life of at least three years even when stored at room temperature
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
MG CHEMICALS Rosin Flux Pen, 835-P
$9.45
Fast wetting
Non-corrosive
Non-hygroscopic
Halide free
RoHS compliant
Controlled application
MG CHEMICALS Liquid Rosin Flux, 835-100ML
$9.95
For leaded and lead free soldering
Fully activated
Offers superior fluxing ability
Instant wetting
RoHS Compliant
MG CHEMICALS RA Rosin Flux Paste, 8342-50G
$7.95
Works well with Leaded or Lead free solders
Solder touch up
Surface mount assemblies rework or repair
Can be applied by dipping or brush / cotton swab spreading
Uses Premium Grade RA Flux
Excellent wettability
High tack force
Long tack time
Zinc Chloride or Ammonium Chloride FREE
Residue can easily be removed with Cat. #824 Isopropyl Alcohol or Cat. #4140 Flux Remover
Complies with IPC ANSI-J-STD-004 ROH1
RoHS compliant
MG CHEMICALS No Clean Flux Paste in Syringe, 8341-10ML
$10.95
Excellent wettability
No clean
Non-conductive, Non- tacky residues
Compatible with Lead free & Leaded Solder Systems
Thixotropic paste
RoHS compliant
MG CHEMICALS Silver Conductive Epoxy 15 grams, 8331S-15G
$106.85
4 Hr. Working Time / High Conductivity
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Excellent adhesion to most electronic substrates
MG CHEMICALS Silver Conductive Epoxy 14 grams, 8331-14G
$97.35
Good 0.017 Ocm electrical resistivity and 0.90 W/(mK) thermal conductivity
Adheres to most electronic substrates
Stores and ships at room temperatureno freezing or dry ice required
Very long shelf life of at least two yearseven when stored at room temperature
Easy 1:1 mix ratio
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
MG CHEMICALS Sn60 / Pb40 Leaded Solder .062, 4898-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn60 / Pb40 Leaded Solder .05, 4897-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .032, 4885-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn60 / Pb40 Leaded Solder .032, 4895-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .04, 4886-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .05, 4887-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .062, 4888-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
3M Indoor Mounting Tape 1" x 50", 114DC
$3.90
Double Sided Tape Works on most indoor surfaces that are clean, dry and smooth
Tape holds up to 5lbs. One inch holds a quarter pound, four inches hold one pound
Made in USA with U.S. and globally sourced materials
MG CHEMICALS Sn60 / Pb40 Leaded Solder .032, 4890-18G
$4.95
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .025, 4884-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn60 / Pb40 Leaded Solder .04, 4896-227G
$34.74
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Sn63 / Pb37 Leaded Solder .032, 4880-18G
$4.95
RA Flux Core Solder
Meets J-STD-004 / J-STD-006
Non-corrosive and electrically non-conductive flux residue
Standard Flux Core percentage at 2.2%
Solder Melting Point: 183C / 361F
MG CHEMICALS Low Temperature Solder Paste T3 SN42/BI57/AG1, 4902P-15G
$11.95
Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
Flux meets J-STD-004B
Excellent fine pitch printing capability
Long operational life - non-slumping
Good wettability
MG CHEMICALS Structural Epoxy Adhesive, 9200-25ML
$18.95
Toughened, smooth, thixotropic paste
1:1 mix ratio
Working life: 30 minutes
Cure time: 24 hours at room temperature
Non-sagging and gap filling
Very strong adhesion
Bonds dissimilar materials
Highly resistant to vibration and temperature cycling
Extreme chemical resistance
Low shrinkage
Easy to dispense
MG CHEMICALS IPA 70/30 Presaturated Tub Wipes 6" x 8", 8241-110
$21.75
Excellent for cleaning SMT stencils
100% polyester non-woven wipes
110 wipes, 15 cm x 20 cm (6" x 8")
Safely removes dust, dirt, and greases from electronics and peripherals
Available in a tub wipe dispenser
RoHS compliant
CARB Category and Limits: Electronics Cleaner 75%
MG CHEMICALS Isopropyl Alcohol 99.9% Pure 475ml Pump Bottle, 824-500ML
$9.95
99.9% Pure Anhydrous General all-purpose cleaner
Safe on plastics
MG CHEMICALS Static Off Antistatic Foaming Spray, 826-450G
$10.95
Safe on all substrates
Non-flammable and non-abrasive
Eliminates static charge with one application
Reduces attractions of dust and other airborne contaminants
Non-streaking and non-dripping - excellent for transparent and vertical surfaces
Suitable for Use in Food Facilities as a Non-Food Chemical - Canadian and NFS recognition letters available on request
MG CHEMICALS Isopropyl Alcohol 99.9% Pure 125ml, 824-100ML
$7.95
99.9% Pure Anhydrous General all-purpose cleaner
Safe on plastics
MANHATTAN LCD Mini Cleaning Kit, 421010
$5.90
Isopropyl alcohol-free
Safe for use on LCD surfaces – helps restore and maintain brightness and clarity
Ideal for use with flat panel displays, notebook computers, televisions and more
Soft brush gently eliminates excess dust and debris without scratching
Non-aerosol cleaner removes fingerprints and smudges without harsh solvents
Soft, lint-free microfiber cloth cleans, dries and polishes for a clear, non-streak finish