Communication Products

2-way radios, scanners for police, fire and public service, CB radios and accessories. Let us help you help yourself. Call "You-do-it" Electronics Center if you need help deciding which model is right for you.
Items 1 to 36 of 113 total

Grid List

SPECO Weatherproof PA Speaker Horn 5" 8 Ohm, SPC-5P

$17.90
Frequency Response: 300Hz ~ 15kHz Max Power: 15W Sensitivity: 105dB 1W/1M Impedance: 8 Ohms Size: 5" Diameter x 4-3/4" Length Weatherproof ABS construction Includes 10' cord with 3.5mm plug

KENWOOD Earbud In-line PTT Headset, KHS-26

$29.00
Earbud with Clip MIc & In-line PTT Dual Jacks fit all Kenwood 2-pin Radios For use with TK-3230 & TK-3400U4P

Kenwood D-Ring In-line PTT Headset, KHS-27

$24.90
D-Ring Ear Hanger with Clip Mic & In-line PTT Dual Jacks fit all Kenwood 2-pin Radios For use with TK-3230 & TK-3400U4P

Kenwood Earbud Headset for PKT-23K, KHS-33

$33.70
Earbud with Clip Mic & In-line PTT Single 3.5mm jack to connect to compatible Kenwood radios For use with PKT-23K

KENWOOD Lightweight Speaker Microphone, KMC-21

$53.00
Compact Speaker MIcrophone Dual Jacks fit all Kenwood 2-pin Radios For use with TK-3230 & TK-3400U4P

PANAVISE AMPS to 17mm ball adapter for Garmin, 767-GR2

$14.90
Adapter for your Garmin (NUvi, Zuma and C-Series) and any product compatible with a 17mm ball/socket. Install this adapter on to your AMPS pattern device including PanaVise InDash Mounts, Pedestal and Flex Mounts. Will also adapt to any 17mm diameter ball socket. Works with most Motorola cradles

NITEIZE Steelie Vent Mount Car Kit, STVK-11-R8

$31.99
The Steelie Vent Mount Kit allows you to attach any smartphone to any dashboard vent, keeping your phone handy and hands-free in any vehicle. Each Steelie Vent Mount Kit includes one Steelie Vent Ball Mount, one Steelie Magnetic Phone Socket with 3M VHB adhesive, and installation kit

NITEIZE Steelie Desk & Dash Mount System, STPVC-11-R8

$55.99
Multi-setting system for mounting smartphones Contains: Steelie Magnetic Phone Socket, Steelie Vent Ball, and Steelie Tabletop Stand

NITEIZE Steelie Hob Knob Kit for smartphones, STHMK-M1-R8

$19.99
Make a stand and get a handle on your tablet, e-reader, or other electronic device with the Steelie HobKnob Kit. Each Steelie HobKnob Kit includes one Steelie HobKnob Handle, one Steelie Magnetic Tablet Socket, an alcohol prep pad, and installation instructions

NITEIZE Steelie Car Mount Kit, STCK-11-R8

$29.99
Steelie - The world's finest phone and tablet holding system The Steelie Car Mount Kit is the perfect phone holder for your car. It docks your phone to your dashboard in a snap, so it's visible, accessible, and right where you need it, everywhere you go. Each Steelie Car Mount Kit includes one Steelie Magnetic Phone Socket with 3M VHB adhesive pad, one Steelie Ball Mount with 3M VHB adhesive pad, an alcohol prep pad, and installation instructions

PANAVISE Mount Stand, 9", 960-09

$24.90
Rise height is 9" (203.2mm) Base plate measures 4.25"x 4.25" (108mm x 108mm) Base is pre-drilled with four 0.328" (8.33mm) corner holes Steel shaft is 1" (25.4mm) in diameter at the base and 5/8" (15.9mm) at the top Recommended for use with 336 series Work Station Mounts (sold separately)

NITEIZE Steelie Heavy Duty Pedestal Kit, STTK-11-R8

$39.99
Whether you're typing, viewing, reading, or video chatting, the Steelie Pedestal Kit is a smart, stylish way to keep your tablet securely upright and conveniently accessible Each Steelie Pedestal Kit includes one Steelie Magnetic Tablet Socket, one Steelie Tabletop Stand, an alcohol prep pad, and installation instructions

PANAVISE BarGrip Universal Phone Handlebar Mount, 13260

$39.90
Includes PanaVise BarGrip Handlebar Mount and Rokform Universal Mount Rokform Universal Mount with 3M adhesive - mount any phone or tablet PanaVise BarGrip Handlebar Mount fits round and oblong bars: 7/8" (min) to 1-1/4" (max) Ideal for: bicycles, motorcycles, ATVs or any round or semi-round tube Non-slip rubberized inserts Internal structured ribs design for high-strength holding power Fully Adjustable: 210 Degree Tilt, 360 Degree Turn and 360 Degree Rotation Premium Materials: made of custom, engineered composites and light-weight aluminium

PANAVISE PortaGrip with Fixed Pedestal Mount, 15571

$39.99
Fixed mount with full articulation Includes PortaGrip Phone Holder and 717-06 Pedestal Mount See below for details

PANAVISE Mount w/Adjustable Head, 6", 322

$39.90
AMPS-compatible mounting plate is adjustable under the electronics Rugged base features "split ball" for 90° Tilt, 360° Turn & Rotation. 6" (152.4mm) overall rise height Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center Mounting plate features 210° Tilt, 360° Turn and Rotation with knob or set-screw adjusting option (both included) 5/8" (15.9mm) shafts are easily removed and are interchangeable with any 5/8" (15.9mm) shaft Base can be locked into place with either knob or set-screw adjusting option (both included) Knob or set-screw can be selected and installed on either side of the ball housing Base footprint has four 0.219" (5.56mm) on a 4.23" (107.5mm) circle

PANAVISE Universal Radio Mount, 45-45 tilt, 9", 951-09

$39.90
Same "split ball" base, but with 45° tilt over center, 360° Turn & Rotation.  9" (228.6mm) overall rise height Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies) Maximum holding power: up to 10 lbs. (4.5kg) Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle Base can be locked into place with either knob or set-screw adjusting option (both included)

PANAVISE Universal Radio Mount, 90 tilt, 9", 950-09

$39.90
Rugged base features our famous "split ball" for 90° Tilt, 360° Turn & Rotation. 9" (228.6mm) overall rise height Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies) Maximum holding power: up to 10 lbs. (4.5kg) Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle Base can be locked into place with either knob or set-screw adjusting option (both included)

PANAVISE Tri-Foot Base or T-Bar Clip - Dual Option Mount, 6" - White, 883-06W

$31.99
6" (152.4mm) overall mount length Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter] Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation Knob and tamper-resistant set-screw adjusting options included 1/4-20 mounting stud with lockring

PANAVISE Tri-Foot Base or T-Bar Clip - Dual Option Mount, 6" - Black, 883-06

$31.99
6" (152.4mm) overall mount length Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter] Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation Knob and tamper-resistant set-screw adjusting options included 1/4-20 mounting stud with lockring

PANAVISE Magnetic Base - Black, 864 PANA

$18.99
Magnet holds up to 5 lbs. (2.3kg) in a vertical pull. Base is 2.75" (69.8mm) in diameter and 0.385" (9.8mm) thick 1/4-20 mounting stud

PANAVISE Deluxe Camera Mount, 9" - Black, 827-09

$35.99
 9" (228.6mm) overall mount length Both adjusting points have a full range of motion: 210� Tilt, 360� Turn & 360� Rotation 1/4-20 mounting stud with lockring Shafts are machined aluminum alloy 0.875� (22.2mm) in diameter Knob and tamper-resistant set-screw adjusting options included Square mounting base for solid surfaces, 2.5� x 2.5� (63.5mm x 63.5mm), with four 0.219� (5.56mm) holes on 2.0� (50.8mm) x 2.0� (50.8mm) layout

PANAVISE Deluxe Camera Mount, 6" - Black, 827-06

$31.99
The world's most versatile camera mounts with twice the positioning power! The preferred choice for installations with demanding requirements. 6" (152.4mm) overall mount length Both adjusting points have a full range of motion: 210� Tilt, 360� Turn & 360� Rotation 1/4-20 mounting stud with lockring Shafts are machined aluminum alloy 0.875� (22.2mm) in diameter Knob and tamper-resistant set-screw adjusting options included Square mounting base for solid surfaces, 2.5� x 2.5� (63.5mm x 63.5mm), with four 0.219� (5.56mm) holes on 2.0� (50.8mm) x 2.0� (50.8mm) layout

PANAVISE 3 inch Extension for 809 Series Suction Cup Mounts, 812-03

$10.99
Combine with PanaVise 809 Series Suction Cup Mounts to mount devices to your windshield Adds extra versatility to all 809 series window mounts Ideal for steeper pitched windshields Adds 3" to overall mount length Includes installation hex key 812-03 Extension installation instructions:(copy and paste into browser address bar) http://www.panavise.com/812-03.pdf

PANAVISE UniFlex Gooseneck Mount, 10", 797-10

$36.99
AMPS-compatible mounting plate with an adjusting point under the electronics. Overall mount length (including the shaft) is 10" (254.0mm) Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation Knob and set-screw adjusting options included Double wound shaft, vinyl coated for heavy-duty protection Base can be mounted vertically or horizontally; the shaft easily screws into either configuration Screw caps included for a finished look

PANAVISE Slimeline Small Foot Pedestal Mount, 12", 727-12SF

$29.90
Knob and Set Screw Adjustment Features 210° Tilt, 360° Turn & 360° Rotation at both ends Head plate is molded of durable glass fiber-reinforced composite plastic Aluminum alloy shaft Housing at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points AMPS-compatible mounting pattern Foot is molded of durable long glass fiber-reinforced composite plastic Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)

PANAVISE Slimline Pedestal, 4", 727-04

$28.99
AMPS-compatible. Knob and set-screw adjusting option included. Overall mount height (including shaft) is 4" (101.6mm) 210� Tilt, 360� Turn & 360� Rotation under the component  Aluminum, zinc and steel construction Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 � (63.5mm x 63.5mm)

SLIMLINE Slimline 2000 Pedestal, 9", 717-09

$25.99
AMPS-compatible. Knob and set-screw adjusting options included. Overall mount height (including shaft) is 9" (228.6mm) 210� Tilt, 360� Turn and 360� Rotation at both ends Head plate is molded of durable glass fiber-reinforced composite plastic Aluminum alloy shaft Housings at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center Foot is molded of durable long glass fiber-reinforced composite plastic Concave foot design evenly distributes the mounting load for maximum stability and eliminates �carpet float� Foot measures 2.5� x 2.5� (63.5mm x 63.5mm)

PANAVISE Work Station Mount - Vesa 75MM Plate, 336-V75

$36.99
Fully adjustability, 90° Tilt, 360° Turn & 360° Rotation for precise screen positioning Includes knob or set-screw adjusting options (not pictured) Accepts any 5/8" (15.9mm) diameter shaft Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg) 75mm VESA compatible mounting plate Match with 6" stand (960-06) or 9" stand (960-09)

PANAVISE Work Station Mount - Vesa 100MM Plate, 336-V100

$36.99
Full monitor adjustability for your desk or work station!  Fully adjustability, 90° Tilt, 360° Turn & 360° Rotation, for precise screen positioning Includes knob or set-screw adjusting options (not pictured) Accepts any 5/8" (15.9mm) diameter shaft Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg) 100mm VESA compatible mounting plate Match with 6" stand (960-06) or 9" stand (960-09)

VELLEMAN Selfie Stick with Wireless Remote Control Shutter Button, CAMB18

$9.90
The remote control can be used up to 30 ft (10M). Made for IOS and Android and most smartphones and tablets. Length 8.66" (22 cm) and extendable up to 42.9" (109 cm). The holder rotates up to 180 degrees and is extendable from 2.17" to 3.2" (55 mm to 83 mm). Battery included (CR2032). Certain smartphones will need the Camera 360 app installed. *Smartphone viewed in picture not included

PANAVISE T-Slot Adapter Plate, 670-A

$5.99
An Easy Mounting for XM Satellite Radios Specially designed plate for XM-style mounting AMPS-compatible adapter plate converts any AMPS-compatible mount into an XM-style satellite radio mount! Suitable for any XM satellite radio or electronics with a T-Button mounting system Compatible with all similar systems Made of durable glass fiber-reinforced composite plastic

PANAVISE Action BarGrip Camera Mount, 13220

$32.99
Compatible with any camera: includes standard 1/4-20" ball and GoPro ball Fits round and oblong bars: 7/8" (min) to 1-1/4" (max) Non-slip rubberized inserts Internal structured ribs design for high-strength holding power Fully Adjustable: 210° Tilt, 360° Turn and 360° Rotation Premium Materials: made of custom, engineered composites and light-weight aluminium Ideal for: bicycles, motorcycles, ATVs or any round or semi-round tube