LAN Tools & Testers

20 Item(s)

Grid List

KLEIN Digital Circuit Breaker Finder with GFCI Outlet Tester, ET310

Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker Receiver delivers clear visual and audible indications when the correct breaker has been located Operates on 90-120V AC circuits Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411) Receiver powers off automatically after approximately three minutes of non-use to conserve battery life Transmitter is powered by the circuit when connected to the electrical outlet or fixture Low battery indicator Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery Built to withstand a 6.6-Foot (2 m) drop CAT II 120V safety rating Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver)

KLEIN AC/DC Digital Clamp Meter, 400A Auto-Ranging, CL380

Measures both AC/DC current via the clamp Non-contact voltage tester integrated into the clamp jaw High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads Measures temperature with a K-Type thermocouple probe Max/min, Rel/zero and data hold capability Auto power off after five minutes to conserve battery life Low battery indicator and easily accessible battery compartment Built to withstand a 6.6 foot (2m) drop Includes a carrying case, test leads, thermocouple probe, instruction manual and 3 x AAA batteries CAT III 600V, Class 2, Double insulation safety rating Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

KLEIN WiFi Borescope, ET20

WiFi Borescope transmits and displays video and images directly to your smartphone up to 30 Feet (9 m) away Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images Tough, armored 6-Foot (1.8 m) long waterproof camera gooseneck maneuvers around obstacles while maintaining rigidity Battery status indicator tracks the charge level of the lithium-ion battery Increase and decrease camera LED output either on the Borescope or in the App The App not only acts as a display, but stores and shares images and videos via text or email Includes convenient pocket clip, USB charging cable, hook attachment, carrying case, and instructions The Klein Borescope App is available free at the App Store® for iPhone® users and Google Play® for Android® users

PLATINUM EZ-RJ45 Crimp Tool, 100004C

Crimps and trims extended wire in EZ-RJ45; Connector in a single cycle. (EZ-RJ12/11; requires manual trimming) For use with EZ-RJ45; Cat 5/5e & Cat 6 Connectors. Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP). Features precision cast crimping dies for superior accuracy. Built-in wire cutter. Laser marked with wiring guide for proper wire sequence.

KLEIN Electrical Test Kit, 69149

The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects MM300 tests continuity with visual and audible continuity indicators Test leads included for MM300; batteries included for NCVT-1 and MM300

KLEIN Scout Pro 3 Tester Starter Kit, VDV501-851

Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results Measure cable length (up to 2,000 feet) Test for Open, Short, Miswire or Split-Pair faults Backlit LCD screen displays cable length, wiremap, cable ID and test results Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Hub blink mode to identify port location on a hub or a switch LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote Auto Power-off feature to conserve battery life (9V included) Kit includes: Scout® Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-connector locator remotes, (1) coax F-connector, manual and 9V battery

KLEIN Scout Pro 3 Tester with Locator Remote Kit, VDV501-852

Cable tester for voice (RJ11/12), data (RJ45) and video (F-connector) coax connections Self-storing Test + Map™ Remote (#1) tests, maps and IDs a cable run in a single step Power over Ethernet Tester that displays PoE wire and Voltage Trace cables, wire pairs and individual conductor wires with a tone generator Measures cable length up to 2,000 feet (610 m) Identify multiple cable runs with location-mapping remotes Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Detect, identify and test Power over Ethernet (PoE) Backlit LCD screen displays cable length, wiremap, cable ID and test results Hub blink mode to identify port location on a hub or a switch Includes 1 Self-storing Test + Map Remote (31), 18 RJ45 LAN locator remotes, 18 F coax locator remotes, 2 female-to-female coax adapters and a 9V battery Includes a 9V battery and convenient carrying case

KLEIN Tone & Probe PRO Kit, VDV500-820

Includes a professional grade tone generator and tracing probe for non-active wiring Toner-Pro features 5 distinct tone cadences Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs Probe-Pro features 3.5 mm headphone jack for noisy environments (headphones not included) Responsive probe with durable non-metallic, replaceable conductive tip (VDV999-068) - sold separately Work light on probe tip for use in dark spaces Terminal block on probe to confirm the toned pair Each tool includes 4X AAA batteries Custom, padded, divided, zipper pouch for convenient storage (VDV770-500) included with kit

KLEIN Probe-PRO Tracing Probe, VDV500-123

Traces non-energized wiring when used with Toner-Pro Tone Generator (VDV500-063, sold separately) Responsive, durable, replaceable non-metallic, conductive tip Work light for use in dark spaces 3.5 mm headphone jack for noisy environments (headphones not included) Terminal block on probe to confirm the toned pair has been located Tool-less, twist-and-lock replacement tip (VDV999-068) available One push power button with power-on LED indicator - no need to hold button down Auto power-off Low battery indicator 4 x AAA batteries included Includes a loop for a lanyard Works with Klein's Scout Pro, Lan Scout, Jr. and Commander series of testers

PLATINUM EZ-RJPRO Heavy Duty Crimp Tool, 100054C

Zero flex frame prevents torque loss during the crimping cycle. Tool steel die head assembly provides 360 degree of connector support during crimp. Clean, ultra flush trim on the EZ-RJ45 extended conductors. Expanded surface area on contact drivers delivers full, uniform crimp force. Built-in cutter and stripper for flat and round cable. Patented "crimp and trim system" delivers a clean, flush trim on the extended conductors for all EZ connectors. Ratcheted, high leverage and stable platform for consistent, repeatable terminations.

PLATINUM ezEX-RJ45 Termination Crimp Tool, 100061C

Single cycle crimp and flush trim EXO Die™ is easily interchangeable Reversible EXO Die™ for ambidextrous operation Connectors lock into tool for correct positioning during crimp Push button lock for easy storage Ergonomic comfort grip TPR handles Includes EXO-EX Die™ for crimping ezEX™44 and ezEX™48 connectors Terminates larger cables and conducts Cat6 and Cat6A

INTELLINET Universal Modular Plug Crimping Tool, 211048

Crimps RJ45, RJ12 and RJ11 modular plugs Cuts and strips both round and flat cable

GREENLEE Bix Blade for Punchdown Tool, PA4574

Cushion grip, molded to the shape of your hand, for comfort and a sure, non-slip hold Increased HI/LO impact force to meet demands of new cable types and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N) For 28-22 AWG (0.08 - 0.34mm2), solid or stranded wire Uses twist-and-lock style blades Cushioned heel for comfort in the palm of your hand New latch cover blade storage area in end of handle Lanyard holes in end

KLEIN Punchdown Screwdriver Multi-Tool, VDV001-081

Terminate and cut wire in one step with 110/66 combination cut-type punchdown blade with precision ground cutting edge. Non-impact wire termination. Machine-tooled steel bits for superior strength. Heavy-duty blade barrel provides storage for bits. Bayonet-style (twist & lock) socket accepts most manufacturers' punchdown blades. Cushion-Grip handle for greater torque and enhanced comfort. Tip-Ident® for quick identification of tool. Two Phillips screwdriver tips: #1 and #2. Two slotted screwdriver tips: 3/16'' (5 mm) and 1/4'' (6 mm). Two nut drivers: 1/4'' (6 mm) and 3/8'' (10 mm). One hex key: 3/8''

Klein VDV Scout Pro 2 LT Tester and Remote Kit, VDV501-825

Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections The self-storing Test-n-Map Remote (#1) tests, maps and IDs a cable run in a single step! Utilize the 19 LanMap and CoaxMap Location Remotes to identify cable runs Test for open, short, miswire or split-pair faults Measure cable length up to 2,000 ft. (610 m) Trace cables, wire pairs and individual conductor wires with the Tone Generator (functionality requires an analog tone tracing probe not included) THIS MODEL IS NO LONGER AVAILABLE AND HAS BEEN REPLACED BY VDV501-852

KLEIN LAN Scout Jr Tester, VDV526-052

Tests twisted pair data wiring (RJ45) connections. Easy to use, compact tool saves time and money on the job. Dual function button- operates test functions and tone generator. Large display for easy identification. Rubber molding for comfort. Self-storing remote.

KLEIN Toner-PRO Tone Generator, VDV500-063

Professional grade tone generator for non-active wiring For use with Probe-Pro Tracing Probe (VDV500-123) required (sold separately) Five distinct tone cadences Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone or RJ45 data jacks to tone individual conductors or wire pairs Tests for continuity and polarity with response displayed on clearly labeled, easy-to-read LEDs Auto Power-Off and Low Battery Indicator Loop for a lanyard (4) AAA Batteries included