Because our price on this item is lower than the manufacturer's
suggested retail price , the manufacturer does not allow us to show
you our price until you place the item in your shopping cart.
Adding this item won't require you to purchase the product. You
can easily remove the product from your cart if you decide not to buy it.
At "You-do-it" Electronics Center we have computer networking from patch cables to patch panels, from installation tools to test tools. For the professional or do-it-yourselfer. Call or email us if you don't see what you're looking for.
Includes a professional grade tone generator and tracing probe for non-active wiring
Toner-Pro features 5 distinct tone cadences
Rugged Angled Bed of Nails (ABN) clips securely attach to wires
RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair
Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs
Probe-Pro features 3.5 mm headphone jack for noisy environments (headphones not included)
Responsive probe with durable non-metallic, replaceable conductive tip (VDV999-068) - sold separately
Work light on probe tip for use in dark spaces
Terminal block on probe to confirm the toned pair
Each tool includes 4X AAA batteries
Custom, padded, divided, zipper pouch for convenient storage (VDV770-500) included with kit
Crimps and trims extended wire in EZ-RJ45; Connector in a single cycle. (EZ-RJ12/11; requires manual trimming)
For use with EZ-RJ45; Cat 5/5e & Cat 6 Connectors.
Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP).
Features precision cast crimping dies for superior accuracy.
Built-in wire cutter.
Laser marked with wiring guide for proper wire sequence.
Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
Receiver delivers clear visual and audible indications when the correct breaker has been located
Operates on 90-120V AC circuits
Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices
Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use
Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets.
The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411)
Receiver powers off automatically after approximately three minutes of non-use to conserve battery life
Transmitter is powered by the circuit when connected to the electrical outlet or fixture
Low battery indicator
Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery
Built to withstand a 6.6-Foot (2 m) drop
CAT II 120V safety rating
Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation
Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver)
Measures both AC/DC current via the clamp
Non-contact voltage tester integrated into the clamp jaw
High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads
Measures temperature with a K-Type thermocouple probe
Max/min, Rel/zero and data hold capability
Auto power off after five minutes to conserve battery life
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6 foot (2m) drop
Includes a carrying case, test leads, thermocouple probe, instruction manual and 3 x AAA batteries
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
WiFi Borescope transmits and displays video and images directly to your smartphone up to 30 Feet (9 m) away
Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images
Tough, armored 6-Foot (1.8 m) long waterproof camera gooseneck maneuvers around obstacles while maintaining rigidity
Battery status indicator tracks the charge level of the lithium-ion battery
Increase and decrease camera LED output either on the Borescope or in the App
The App not only acts as a display, but stores and shares images and videos via text or email
Includes convenient pocket clip, USB charging cable, hook attachment, carrying case, and instructions
The Klein Borescope App is available free at the App Store® for iPhone® users and Google Play® for Android® users
Terminate and cut wire in one step with 110/66 combination cut-type punchdown blade with precision ground cutting edge.
Non-impact wire termination.
Machine-tooled steel bits for superior strength.
Heavy-duty blade barrel provides storage for bits.
Bayonet-style (twist & lock) socket accepts most manufacturers' punchdown blades.
Cushion-Grip handle for greater torque and enhanced comfort.
Tip-Ident® for quick identification of tool.
Two Phillips screwdriver tips: #1 and #2.
Two slotted screwdriver tips: 3/16'' (5 mm) and 1/4'' (6 mm).
Two nut drivers: 1/4'' (6 mm) and 3/8'' (10 mm).
One hex key: 3/8''
Tests twisted pair data wiring (RJ45) connections.
Easy to use, compact tool saves time and money on the job.
Dual function button- operates test functions and tone generator.
Large display for easy identification.
Rubber molding for comfort.
Cable tester for voice (RJ11/12), data (RJ45) and video (F-connector) coax connections
Self-storing Test + Map™ Remote (#1) tests, maps and IDs a cable run in a single step
Power over Ethernet Tester that displays PoE wire and Voltage
Trace cables, wire pairs and individual conductor wires with a tone generator
Measures cable length up to 2,000 feet (610 m)
Identify multiple cable runs with location-mapping remotes Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers
Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers
Detect, identify and test Power over Ethernet (PoE)
Backlit LCD screen displays cable length, wiremap, cable ID and test results
Hub blink mode to identify port location on a hub or a switch
Includes 1 Self-storing Test + Map Remote (31), 18 RJ45 LAN locator remotes, 18 F coax locator remotes, 2 female-to-female coax adapters and a 9V battery
Includes a 9V battery and convenient carrying case