Arduino

Create all sorts of interactive objects and environments with Arduino, an open source electronic prototyping platform. If you like tinkering with electronics but lack the time and knowledge to finish a project consider Arduino. It’s a tinkerer’s dream and makes hardcore electronics projects accessible to anyone. Build electronics projects with Arduino’s programmable circuit board and IDE (Integrated Development Environment) that runs on your computer and can write and upload computer code to the physical board. Get started with Arduino Starter Kit with components and tutorials for several projects. Contact the experts at “You-Do-It” Electronics with any questions.
Items 1 to 10 of 27 total

Grid List

VELLEMAN Atmega32u4 Wearable Lilypad Development Board, VMA105

$9.99
microcontroller: ATmega32U4 operating voltage: 2.7 - 5.5 VDC input voltage: 2.7 - 5.5 VDC digital I/O pins: 9 PWM channels: 4 analogue input channels: 4 DC current per I/O pin: 40 mA flash memory: 32 KB (of which 4 KB used by bootloader) SRAM: 2.5 KB EEPROM: 1 KB clock speed: 8 MHz diameter: 50 mm 100% compatible with Arduino® Liliypad

VELLEMAN Arduino Compatible DIY Kit with MEGA 2560, VMA502

$44.90
This kit includes: 1 x ATmega2560 MEGA DEVELOPMENT BOARD (VMA101) 15 x LED (different colors) 8 x 220 Ohm resistor (RA220E0) 5 x 1K resistor (RA1K0) 5 x 10K resistor (RA10K0) 1 x 830 hole breadboard 4 x 4-pin Key switch 1 x Active buzzer (VMA319) 1 x Passive buzzer 1 x infrared sensor diode 1 x LM35 temperature sensor (LM35DZ) 2 x Ball tilt switch (similar to MERS4 & MERS5) 3 x Photosenitive resistor LDR (similar to LDR04) 1 x single digit 7 segment LED display 30 x Breadboard jumper wire 1 x USB cable

VELLEMAN Basic Arduino Compatible Experimenter's Kit with ATMEGA328 Nano, VMA504

$39.90
What's Included: 1 ATmega328 NANO development board - VMA102 1 USB cable 1 Breadboard 30 Breadboard jumper wires 2 Light dependant resistors 1 IR remote receiver 4 Tactile switches 15 LEDs 1 Seven segment display 1 buzzer 1 50K potentiometer 2 Tilt switch 10 220 Ohm resistors 10 1k Ohm resistors

VELLEMAN Brightdot Wearable Delevopment Board, VMW100

$24.99
Atmega32u4 @ 8 MHz native USB support 24 BrightDot addressable RGB LEDs (WS2812) ON/OFF switch reset button 1 user button 1 user LED PCF8523 RTC clock 10 GPIO sewable contacts and alligator clip friendly charging indicator LED RX/TX LED indication LEDs are mounted in a clock form free Arduino library included: an easy to use battery holder for 3 AA batteries (batteries not incl.)an easy to use battery holder for 3 AA batteries (batteries not incl.) USB 2.0 A to micro USB cable size: diameter: 8 cm (3,15 inch) height: 9 mm (3,54 inch) power supply: USB or battery powered max. battery supply voltage: 6 V current consumption: min. 20 mA, max. 1 A (when all RGB LEDs are on, software limited) battery or USB pass through output: max. 1 A (depends on battery and USB capacity) CPU speed: 8 MHz

VELLEMAN Large Brightdot LED Pack, VMW104

$16.40
2 x tenfold BrightDot strips integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm soler or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V dimensions (L x W): 60.5 x 6.5 mm (2.38 x 0.25 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Corner Brightdot LED Pack, VMW105

$9.90
2 x left BrightDot corners 2 x right BrightDot corners integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! dimensions (L x W): 14.25 x 6.5 mm (0.56 x 0.255 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Small Brightdot Circle LED 2-Pack, VMW107

$17.90
2 x small BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! diameter: 32 mm (1.26 inch) max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board

VELLEMAN Large Brightdot Circle LED, VMW109

$17.90
1 x large BrightDot circle integrated backup line (this ensures that one broken LED does not affect the next LED) each PCB has gold plated contacts with 6 sewing holes of 1.22 mm solder or sew them! max. current consumption: 60 mA / LED at full brightness power supply: 3.3 V - 5 V diameter: 69 mm (2.7 inch) PCB thickness: 2.1 mm (0.082 inch) required: or other Arduino compatible development board