Maker & DIY Technology
"You-do-it" Electronics Center is your one stop shop for all your DIY maker projects. From component level to finished project, we have the parts you need. If you don't see what you're looking for, call or email us.
ARDUINO Pro Mini 328 - 5V/16MHz, DEV-11113
$10.95
ATmega328 running at 16MHz with external resonator (0.5% tolerance)
0.8mm Thin PCB
USB connection off board
Supports auto-reset
5V regulator
Max 150mA output
Over current protected
Weighs less than 2 grams!
DC input 5V up to 12V
On board Power and Status LEDs
Analog Pins: 8
Digital I/Os: 14
SPARKFUN RF Link Receiver - 4800bps (434MHz), WRL-10532
$5.95
434 MHz
500ft range (given perfect conditions)
4800bps data rate
5V supply voltage
SPARKFUN RF Link Transmitter - 434MHz, WRL-10534
$4.95
434 MHz
500ft range (given perfect conditions)
4800bps data rate
5V supply voltage
VELLEMAN Line Tracking Sensor TCRT5000 Module, VMA326
$5.35
Sensor adopts TCRT5000, high sensitivity
Sensitivity adjustable by potentiometer
working voltage: 3.3 V - 5 V
operating current: 20 mA
Digital switch output (0 and 1)
Has 2 fixed bolt holes, convenient installation
small board PCB size: 42 x 10.5 mm
Power indicator light (red) and digital switch output indicator light (green)
detection reflection distance: 1 mm - 25 mm
VELLEMAN Hall Effect Modules 2 pack, VMA313
$4.30
Voltage: 5 VDC
connection: 3 pins, +(middle pin), ground and S (data out)
output (S): Schmitt Trigger, Active Low
Activation: 30 Gauss
Deactivation: 10 Gauss
LED indicator: ON when activated
size: 25 x 15 mm
weight: 2 g
PHILMORE Cadmium Sulfide Photo Cell 2pk, 10810
$4.02
10mm OD...400mWEpoxy - Coated Low Profile CellHigh reliable power dissipation Compact dimensions
NTE Precision Temperature Sensor, 7225
$1.71
Directly Calibrated in °K
1°C Initial Accuracy
Operates From 450μA to 5mA
Less Than 1Ω Dynamic Impedance Ab
SPARKFUN Hall Effect Sensor - US1881, COM-09312
$1.20
3.5V to 24V DC operation voltage
Low current consumption
Temperature compensation
Wide operating voltage range
Open-Collector pre-driver
50mA maximum sinking output current
Reverse polarity protection
Lead Free Package: TO-92
OSEPP IR Follower, IRFOL-01
$7.95
100% Arduino Compatible
Can be used to build a light following robot
OSEPP Light Sensor Module, LIGHT-01
$3.95
Suitable supply voltage: +3 to 5Vdc
Analog voltage output: 0 to 5 Vdc
Detects ambient light density
Works with CdsPhotoresistor
Interface with microcontrollers and logic circuits Analog sensors
Uses PH 2.0 socket
Special sensor with Arduino expansion boards
OSEPP Piezo Sensor Module, PIEZO-01
$5.45
Wide supply voltage range: 3.3V to 5V
Digital output buzzer
Analog input sound pressure sensor
SPARKFUN Flex Sensor 2.2", SEN-10264
$11.95
The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend)
Connector is 0.1" spaced and bread board friendly
SPARKFUN Piezo Element, SEN-10293
$1.90
Piezo elements come in handy when you need to detect vibration or a knock
You can use these for tap or knock sensors pretty easily by reading the voltage on the output
They can also be used for a very small audio transducer such as a buzzer
NTE EL Wire AC Power Supply drives 0 - 30 meters, 69-ELD30
$24.90
AC Input: 110 - 250VAC
Output Power: 8.6W
Output (RMS): 115 - 136VAC
Optimal Load Length: 30 meters (98.43 feet)
NTE EL Wire 12VDC Cigarette Lighter Plug drives 0 - 3 meters, 69-ELDP-1
$5.06
Cigarette Lighter Plug in
DC Input: 12VDC
Output Power: 1.0W
Output (RMS): 130VAC
Optimal Load Length: 3 meters (9.84 feet)
NTE EL Wire 12VDC Cigarette Lighter Plug drives 0 - 5 meters, 69-ELDP-2
$9.48
Cigarette Lighter Plug in
DC Input: 12VDC
Output Power: 1.2W
Output (RMS): 180VAC
Optimal Load Length: 5 meters (16.4 feet)
NTE EL Wire Orange 2.3mm Diameter, 69-ELW2.3-OR
$9.48
Optimum Operating Voltage: 90 - 120VAC
Power Dissipation: 200mW
Standard 9.84 Ft. (3 Meter) Length with Pre-Wired Connector
Extremely Flexible, can be Bent, Knotted, Cut, Stretched, etc.
without Compromising the Lighting Effect
NTE EL Wire Red 2.3mm Diameter, 69-ELW2.3-RD
$9.48
Optimum Operating Voltage: 90 - 120VAC
Power Dissipation: 200mW
Standard 9.84 Ft. (3 Meter) Length with Pre-Wired Connector
Extremely Flexible, can be Bent, Knotted, Cut, Stretched, etc.
without Compromising the Lighting Effect
Sale
ACTOBOTICS 0.770" - 0.770" Pattern Adapter, 545440
Regular Price: $3.49
Your Price: $1.74
Standard Actobotics hole pattern
4 untapped holes and 4 tapped 6-32 holes
OSEPP Tank Mechanical Kit, TANK-01
$99.95
100% Arduino Compatible
aerospace grade anodized aluminum
corrosion resistant coating
Everything you see in image is whats included – ASSEMBLY REQUIRED
optional tires / belt accessories for wheels
Operating voltage output : 9 volts ( x6 AA Batteries)
100% compatible all OSEPP sensors
9v DC motors included
Suggested Accessories: OSEPP TB6612 Motor Driver and UNO Board
OSEPP JST 3 Pin Wire Assembly 6" 10pk, LS-00089
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
OSEPP JST 4 Pin Wire Assembly 6" 10pk, LS-00088
$13.49
6" length
8mm in height after mounting
2.0mm pitch.disconnectable crimp style connectors
Current rating: 2A AC. DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature Rating: -25°C to + 82°C
SPARKFUN XT60 Connectors - Male/Female Pair, PRT-10474
$1.90
Perfect for applications up to 65A continuous draw.Sold in pairs of 1 male and 1 female connector.
SPARKFUN Jumper Wire - 0.1", 3-pin, 6", PRT-10368
$1.90
There is a 3-pin JST RE connector on both ends.
These are simple jumper wires used on standard 0.1" breakaway headers.
Dimensions: 6" length
SPARKFUN Molex Jumper 2 Wire Assembly, PRT-09918
$1.90
There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end
It also comes with the mating connector for the Molex
Dimensions: 6" length