Wire Tracing

Items 1 to 10 of 16 total

Grid List

TRIPLETT Fox & Hound Jr Cable Tracing Kit, 3375

Hound Jr Pocket-Sized with Pocket Clip Small and Streamlined to get into tight places Adjustable Sensitivity / Volume Control Visual Signal Strength Indicator Contains Hi-Gain Hi-Impedance Amplifier Non-Conductive Probe Tip Detects FOX Jr. Signal from up to 12' away Earphone Jack Power Beeper Reminder Powered by one A23 Battery (included) Fox Jr Pocket-Sized with Pocket Clip Overload Warning Beeper alerts user to potential hazards Connects easily with alligator clips or RJ-11 / RJ-45 combo plug Distinctive Warble tone is adjustable over wide range 120VAC Line Cross Resistant Powered by one A23 Battery (included)  

TRIPLETT Fox & Hound, 3399

Hound 3 Adjustable sensitivity and loudness control Bandpass Filter suppresses 60Hz and high frequency noise Identifies Fox 2’s tracer tone up to 12 inches away Headlights illuminate dark areas and reduce fluorescent light noise Built-in signal strength indicator Earphone jack for use in quiet or noisy environments Easy access battery door Rugged, moisture resistant. Mylar cone speaker Fox 2 3 methods of connectivity: RJ-11, RJ-45, or Alligator Clips Cordless phone interface High output, Warble/Pulse selectable Tracer tone Convenient magnetic back for easy mounting TrueTrace cadence shift for definite ID of cable or par within cable Red/Green telephone lines polarity LEDs Tone/Battery LED – indicates that Tracer tone is on and battery status Overload protection to 120 VAC

PLATINUM Tone and Probe Set, TP150

Probe Features: Recessed push-button activates tone scanning when needed Tapered tip allows easy penetration of cable bundles Side thumb wheel adjusts volume and turns off power to reserve battery power Probe Sensitivity: 100Hz~300KHz Tone Generator Features: Slide switch to select TONE/OFF/CONT Continuity mode to verify if a wire is broken Alligator clips to test pairs and an RJ11 connector for data or phone lines Tone Generator Output: 1.5KHz square waveform

TRIPLETT Tone Generator & Amplifier Probe, CTX590A

Traces various types of cables including: twisted pair, LAN, multi-conductor, telephone/alarm and unpowered electrical wire Loud tone with sensitivity control and tone LED for controlled operation Additional tests: voltage, polarity and continuity RJ11, RJ45 and insulated alligator clips for connection; Includes (2) 9V batteries and pouch

TRIPLETT Wire Tracer Kit, CTX30

Quickly trace wires and check phone lines Adjustable sensitivity Audible and visual notification Tip/Ring/Continuity testing

KLEIN Electrical Test Kit, 69149

The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects MM300 tests continuity with visual and audible continuity indicators Test leads included for MM300; batteries included for NCVT-1 and MM300

KLEIN Dual Range Non-Contact Voltage Tester with Laser Pointer, NCVT-5A

Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems Dual-range testing: select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply Bright integrated laser pointer for identifying objects of interest at distance on the jobsite Simple to use intuitive interface is easy to change between voltage detection ranges and easy to determine the currently active range Delivers simultaneous visual and audible voltage indicators when AC voltage is detected Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source Built to withstand a 9.9-Foot / 3-meter drop ''Auto Power-Off'' conserves battery life Screw-thread battery cap Lightweight, compact tool with pocket clip provides convenient storage and quick access CAT IV 1000V safety rating

TRIPLETT TeleTalker 330 Linemans Test Set, 3330

Test Analog / POTS line and systems 3 level volume control (battery not required) can provide up to 12 dB of volume gain Data safe monitor mode High impact weather resistant housing and keypad

KLEIN WiFi Borescope, ET20

WiFi Borescope transmits and displays video and images directly to your smartphone up to 30 Feet (9 m) away Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images Tough, armored 6-Foot (1.8 m) long waterproof camera gooseneck maneuvers around obstacles while maintaining rigidity Battery status indicator tracks the charge level of the lithium-ion battery Increase and decrease camera LED output either on the Borescope or in the App The App not only acts as a display, but stores and shares images and videos via text or email Includes convenient pocket clip, USB charging cable, hook attachment, carrying case, and instructions The Klein Borescope App is available free at the App Store® for iPhone® users and Google Play® for Android® users