Test Equipment

Whether it’s electrical, mechanical, maintenance, safety or environmental applications..."You-do-it" Electronics Center has the test equipment and accessories that you're looking for. If you don't see what you're looking for, call or email us.
Items 1 to 36 of 119 total

Grid List

FLUKE 113 Digital Multimeter, FLUKE-113

VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity True RMS for accurate AC measurements on non-linear loads A large backlit display allows for easy visibility in low-lit areas Record signal fluctuations using the Min/Max function Diode test for testing general-purpose germanium, silicon, and power diodes Integral holster with probe holders for easy storage Auto and Manual ranging for added user functionality Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety

VELLEMAN Digital Clamp Multimeter, DCM266L

digital clamp meter 3 1/2 LCD display with automatic polarity indication data-hold function AC current measurements: max. 1000A insulation test: max. 2000Mohm (if used with optional DCMIT) voltage measurements: AC (max. 750V) and DC (max. 1000V) resistance measurements: max. 20Kohm with carrying bag

FLUKE Rugged Digital Multimeter Waterproof, FLUKE28II

Measure up to 1000 V AC and DC Measure up to 10 A (20 A for 30 seconds) 10,000 μF capacitance range Frequency to 200 kHz Extended AC voltage bandwidth– 15 Hz to 20 kHz Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument Resistance, continuity and diode test Min/Max and average recording to capture variations automatically Peak min-max Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments Designed to withstand 3 meter drop (with holster) Hi resolution 20,000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals New – Backlit keypad buttons allow for easy visibility in lowlit areas Large display digits and 2 level bright white backlight for increased visibility Reversible holster for added protection when not in use Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards Long battery life (800 hours) Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging for maximum flexibility Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks MSHA approval

FLUKE AC/DC Current Clamp 400A, I410

Battery-powered Hall-effect probe measures 1A to 400 A 1mV/Amp output guarantees easy reading on your meter Take accurate current readings without breaking the circuit Maximum conductor Ø 32 mm CAT III 600 V safety rating

ECLIPSE Analog Multimeter, MT-2017

Complied with 2008 CE safety standard Double-sided glass epoxy PCB Mirrored Aluminum dial plate 20kO/V DC & 9,kO/V AC input sensitivity Overload and mis-used protection Adjustable back tilt device with hook-up design Robust protective holster alongside Resistance, Current & Voltage measurements 10 Amp DC Range, Transistor hFE Test Continuity Buzzer and Battery Test Zero-center meter (Null) Test leads, batteries, fuse and user's manual included Ideal for using in the fields of lab, school, home applications and more

ECLIPSE AC Clamp Meter, MT-3266

Comply with CE safety standards Portable and simple one-hand operation Display: 3 1/2 digits 1999 counts Max. jaw opening: 1.97"

ECLIPSE Capacitance Meter, MT-5110

Easy and correct readout. High measuring accuracy. Measurements are possible even under a strong magnetic field. LSI-circuit provides high reliability and durability. Input overload protection is provided. LCD display for low power consumption and clear readout even in bright ambient light conditions. In-line pushbuttons allow one hand operation. Light-weight and compact construction for easy operation. Low battery condition is indicated on the LCD display.

ECLIPSE LCR Meter, MT-5211

3 1/2 digits LCD, Max. reading 1999 Inductance measurement : 2mH to 20H Capacitance measurement 2nF to 1000µF Resistance measurement: 200O to 20MO Low battery indication Data hold function

TRIPLETT DMM True RMS Manual Ranging with Temperature & Battery Test Function, MM300 TRIPP

True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms Measures AC/DC Voltage and Current, Resistance, Temperature, Diode, Continuity, and 1.5V/9V Battery Test Data Hold Auto power off Low battery indicator CAT III 600V safety category Includes test leads and (3) AAA batteries

TRIPLETT Pocket-Sized Autoranging DMM w/ Capacitance & Frequency, 2030C

37 measurement ranges 3 3/4 digit resolution 4000 count display Auto power off Low battery indicator Auto polarity Capacitance range Resistance range Frequency range AC/DC current range Shock absorbing case Overload protection Built-in stand Test leads attached to unit Voltage range up to 600V

FLUKE 400 AC AMP True-RMS Clamp Meter, FLUKE-323

Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A Measures AC current to 400 A Measures AC voltage and DC voltage to 600 V Provides True RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance to 4 kΩ with continuity detection

FLUKE 115 Digital Multimeter, FLUKE-115

Large white LED backlight to work in poorly lit areas Resistance and continuity Frequency and capacitance Maximum Voltage ac/dc 600V 10A ac/dc current measurement (20 A overload for 30-seconds max) Min/Max/Average to record signal fluctuations CAT III 600 V safety rated

Velleman DMM Large Display with Temperature, DVM890F

Low-battery indication, overload protection and automatic deactivation DC current max. 20A, DC voltage max. 1000V AC current max. 20A, AC voltage max. 700V Resistance measurements: up to 20Mohm Capacitance measurements: from 2000pF to 20F Frequency measurements: max. range 20kHz Temperature test range: from 32F to 104F through built-in sensor K-type thermocouple measuring range: from -58F to 1832F

ECG General Purpose Digital Multimeter, DM-850

6 Function, 16 Ranges Perfect for Workshop and School Data Hold Backlight Diode and Continuity Test Transistor hFE test 3 1/2 Digit LCD Display Low Battery Indicator Tilt Stand 0.8% Basic DC Accuracy

FLUKE 117 Electrician's Digital Multimeter, FLUKE-117

VoltAlert technology for non-contact voltage detection AutoVolt automatic AC/DC voltage selection Low input impedance: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas True RMS for accurate measurements on non-linear loads Measures 10 A (20 A overload for 30-seconds) Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation CAT III 600 V safety rated

FLUKE 400A AC & DC True-RMS Clamp Meter, FLUKE-325

Rugged, reliable True-RMS clamp meter with dc current and frequency measurements Measures AC and DC current to 400 A Measures AC voltage and DC voltage to 600 V Provides True RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance to 40 kΩ with continuity detection Measures frequency to 500 Hz

FLUKE 400 Amp AC Clamp Meter True RMS with Temperature Measurement, FLUKE-324

Rugged, reliable basic True-RMS clamp meter Measure AC current up to 400 A, AC/DC voltage to 600V Measure resistance up to 4kΩ, continuity detection ≤ 30Ω Additions from 323 Clamp: Temperature, Capacitance, Backlight

TRIPLETT 8 Piece Electronic Test Lead Kit, TLK008

Ideal for testing and troubleshooting digital/analog circuits ETL Listed CAT III 1000V safety category 42-inch length Includes nylon mesh carrying case with 3 clear pockets to keep your test leads and probes organized

TRIPLETT Non-Contact Forehead IR Thermometer 89.6F - 108.5F, FT2020

Instantly measure forehead temperature 89.6 to 108.5°F (32 to 42.5°C) without making contact ±0.4°F (0.2°C) accuracy  Fast 500ms response time 2 to 6” (5 to 15cm) recommended measuring distance Backlit LCD display with selectable °F or °C readout Measure surface temperature of objects from 32 to 140°F (-0 to 60°C) 0.95 fixed emissivity Automatic Data Hold Auto power off after 7 seconds Includes 9V battery Optional model complete with Certificate of Traceability to N.I.S.T.

FLUKE SureGrip Pincer Clips, AC283A

One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CSA listed

FLUKE ToolPak Magnetic Meter Hanger, TPAK

9 inch hook and loop strap Universal hanger clip Hook hanger for non magnetic surfaces Strong magnet Solves almost any hanging and positioning problem you may face The universal hanger allows you to hang your meter on nails, hooks and many other objects Compatible with many Fluke instruments

FLUKE Sure Grip Industrial Test Probes, TP220

One pair of industrial test probes included (red, black) Sharp, 12 mm stainless steel tip provides reliable contact Flexible finger barrier improves grip Recommended for use with TL222 and TL224 test leads CAT II 1000 V, 10 A rating

VELLEMAN Banana Plug to Alligator Clip Test Lead Set, TLM3

Set of 3..1 black..1 red..1 yellow ratings: max. 30V - max. 2A length: 90cm, overall Ø : 2.80mm, wire : 16 x 0.1mm

FLUKE Premium Right Angle Test Lead Set, TL71

One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads Recommended for V measurements CAT II 1000 V, 10 A rating CAT III 1000 V, CAT IV 600V only with protective cap

FLUKE Sure Grip Insulated Test Leads, TL224

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

FLUKE Twist Guard Test Leads, TL175

Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs

ELENCO Logic Probe, LP-560

Tests all logic families (TTL, LSI, CMOS, ECT) Captures pulses to 25ns (20MHz) Audio beeper, two tones HI and LOW Memory function Colored LED's for different functions Input overload protection Logic probe is circuit powered Reverse polarity protection

PHILMORE BNC Female to Binding Posts, 2392

Banana jacks spaced standard .750" center to center .161 holes in body for side stacking banana plugs