Test Equipment

Whether it’s electrical, mechanical, maintenance, safety or environmental applications..."You-do-it" Electronics Center has the test equipment and accessories that you're looking for. If you don't see what you're looking for, call or email us.
Items 73 to 108 of 119 total

Grid List

TRIPLETT GFCI Receptacle Tester, ET100

$9.99
Detect faulty wiring in 3-wire receptacles Lights display 5 wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse Easy to read fault label on both sides for receptacles with ground up or ground down installation Test GFCI for proper operation

TRIPLETT Fox & Hound HotWire, 3388

$199.00
Live Wire Circuit Tracing Kit w/ Carrying Case Toner and Probe included

TRIPLETT GFCI Receptacle Tester & Line Splitter, ET200

$19.99
Combines a GFCI Tester and AC Line Splitter in one tool Check outlet wiring, measure voltage, and use your clamp meter to measure current up to 15A without breaking the circuit Lights display 5 wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse Test GFCI for proper operation

GENERAL TOOLS Wireless Thermometer, EMR813

$29.90
Three available channels to minimize interference  Min/Max memory  Programmable alarm  F/C switch Indoor measurement range: 32 to 122F (0 to 50C)  Outdoor measurement range: -4 to 158F (-20 to 60C)  Wireless range: 100 ft. (30m) with no obstructions  Transmission frequency: 434 MHz  Display resolution: 0.1  Power source: Two "AAA" batteries (not included)

GENERAL TOOLS Wireless Temperature Sensor, THGR268

$49.90
Additional Wireless Sensor for #EMR963HG Temperature measurement range: -58 to 158F (-50 to 70C)  Relative humidity range: 25% to 90%  Transmitting range/frequency/sampling time: up to 90 ft./433 MHz/40 seconds Power source: Two "AAA" batteries (included)

GENERAL TOOLS Wireless Temperature-Humidity Meter, EMR963HG

$79.90
Includes base station with jumbo display + one #THGR268 wireless temperature-humidity sensor; base station can link to two additional #THGR268 sensors Min/Max memory F/C switch  Base station and sensor(s) can mount on a wall or stand on a surface  Indoor/outdoor temperature range/resolution: -58 to 158F (-50 to 70C)/0.1 Indoor/outdoor RH range/accuracy/resolution: 25% to 90%/5%/1%  Transmitting range/frequency/sampling time: up to 90 ft./433 MHz/40 seconds Power source: Two "AAA" batteries each for base station and sensor (included)

FLUKE 62 MAX+ Infrared Thermometer, FLUKE-62MAX+

$192.99
Measure -30C to 500C (-22F to 932F) for Fluke 62 MAX and -30C to 650C (-22F to 1202F) for Fluke 62 MAX+ Extremely accurate: up to +1.0C or +1.0% of reaching (Fluke 62 MAX+) IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites. Strong enough to withstand a 3 m drop. No worry even if you work from a ladder. Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box. Up to 12:1 Distance to spot (Fluke 62 MAX+): Precise laser technology makes for more accurate and repeatable measurements.

KLEIN Insulation Resistance Tester, ET600

$164.99
Test insulation resistance up to 4000MΩ at 125V, 250V, 500V, and 1000V DC Test and Lock buttons for simple insulation testing Warning alarm and high voltage icon for detection of voltage Measures up to 1000V AC/DC, low resistance, and continuity Automatic ranging True Root Mean Square (TRMS) technology for increased accuracy Backlit display with bar graph, Auto-power off, High Voltage, Max/Min, and Hold icons Low battery indicator with easily replaceable battery and fuse Built-in stand and optional magnetic hanger for hands free operation Test verification of conformity to EN61557-1,-2,-4 CAT IV 600V and CAT III 1000V safety rating Includes Right Angle Test Leads and Heavy-Duty Alligator Clip Test Leads

KLEIN Pinless Moisture Meter, ET140

$41.97
Pinless, electromagnetic field (EMF) technology allows for nondestructive detection of moisture content in building materials Detects moisture content up to 3/4-Inch (19 mm) deep Easy viewing with bright reverse-contrast display Nine LED bars indicate moisture range Easy-to-select materials with mode button; drywall, masonry, hardwood, and softwood Hold, Low battery, and Auto-Power off functions Built to withstand a 6.6 foot (2 m) drop Includes detector, 9V battery, and instruction manual

ECLIPSE Infrared Thermometer, MT-4606

$26.99
-50 to 380°C Measuring Range, Resolution 0.1°F/°C: Temperature range measurement from -50 to 380°C (-58°F ~716°F)Temperature Range Non-Contact Measurement: Compact and ergonomic design with non contact measurement in 2% best accuracy Adjustable Emissivity: From 0.10 ~ 1.00 emissivity adjustable for accurately measuring in different surface types Distance Spot Ratio 12:1, 500ms Fast Response: 12:1 Infrared distance-to-spot Ratio with single point laser sighting User Friendly Design: Design with unit selection, backlight, auto power off, low battery indication, data hold, max. value for easy operation

EXTECH Thermo-Pedometer, PD20

$39.90
Pocket-Size Pedometer with 3D Sensor For Detecting Motion Regardless of Orientation 3D motion sensor design allows for the meter to be fully functional regardless of its orientation Uses an intelligent algorithm to filter out non-walking movements Functions: Number of Steps: 0 to 99999 (adjustable step length) Temperature: 14 to 122°F (-10 to 50°C) Calorie consumption: 0 to 99999kcal Fat burned: 0 to 35.9oz (0 to 999.9g) Distance covered: 0 to 624.99mi (0 to 999.99 km) Time: 12/24 hour format Average speed: 0 to 6.25mph (0 to 10km/h)

KLEIN Dual-Laser Infrared Thermometer, 20:1, IR10

$101.99
Incorporates surface temperature measurement capability using IR emission and can also measure bulk temperatures of air, gas, or liquids using a standard K-Type probe Dual targeting lasers offer more accurate determination of the area being tested Optical Resolution (Distance-to-Spot) is 20:1 Measurement range for both IR and K-Type probe -40 to 1200-Degree Fahrenheit (-40 to 650-Degree Celsius) Adjustable emissivity from 0.1-1.0 delivers flexibility to address multiple applications Bright backlit display for working in low ambient lighting conditions Statistical parameters for measurement event - max/min/avg/diff User definable high/low limits with audible and visual alarms when limits are breached Uses one 9-volt alkaline battery, with battery life expectancy at 8 hours of continuous use with laser and backlight on Includes custom pouch, K-Type probe and battery Soft-touch, over-mold housing; built to withstand a 9.9-Foot (3 m) drop IP54 ingress protections for dust and water resistance ''Auto Power-Off'' conserves and extends battery life U.S. patent D791,624

KLEIN Scout Pro 3 Tester Starter Kit, VDV501-851

$89.97
Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results Measure cable length (up to 2,000 feet) Test for Open, Short, Miswire or Split-Pair faults Backlit LCD screen displays cable length, wiremap, cable ID and test results Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Hub blink mode to identify port location on a hub or a switch LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote Auto Power-off feature to conserve battery life (9V included) Kit includes: Scout® Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-connector locator remotes, (1) coax F-connector, manual and 9V battery

KLEIN Scout Pro 3 Tester with Locator Remote Kit, VDV501-852

$179.99
Cable tester for voice (RJ11/12), data (RJ45) and video (F-connector) coax connections Self-storing Test + Map™ Remote (#1) tests, maps and IDs a cable run in a single step Power over Ethernet Tester that displays PoE wire and Voltage Trace cables, wire pairs and individual conductor wires with a tone generator Measures cable length up to 2,000 feet (610 m) Identify multiple cable runs with location-mapping remotes Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Detect, identify and test Power over Ethernet (PoE) Backlit LCD screen displays cable length, wiremap, cable ID and test results Hub blink mode to identify port location on a hub or a switch Includes 1 Self-storing Test + Map Remote (31), 18 RJ45 LAN locator remotes, 18 F coax locator remotes, 2 female-to-female coax adapters and a 9V battery Includes a 9V battery and convenient carrying case

Klein VDV Scout Pro 2 LT Tester and Remote Kit, VDV501-825

$149.99
Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections The self-storing Test-n-Map Remote (#1) tests, maps and IDs a cable run in a single step! Utilize the 19 LanMap and CoaxMap Location Remotes to identify cable runs Test for open, short, miswire or split-pair faults Measure cable length up to 2,000 ft. (610 m) Trace cables, wire pairs and individual conductor wires with the Tone Generator (functionality requires an analog tone tracing probe not included) THIS MODEL IS NO LONGER AVAILABLE AND HAS BEEN REPLACED BY VDV501-852

KLEIN LAN Scout Jr Tester, VDV526-052

$59.97
Tests twisted pair data wiring (RJ45) connections. Easy to use, compact tool saves time and money on the job. Dual function button- operates test functions and tone generator. Large display for easy identification. Rubber molding for comfort. Self-storing remote.

FLUKE Thermocouple Module Type K, 80TK

$159.99
Converts a DMM to a thermometer For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC) Measurement range: -50 to 1000°C (probe dependent)

VELLEMAN Digital LCR/Impedance Meter, LCR45

$99.99
resistance: range: 0 Ohm to 2 MOhm resolution: 0.1 Ohm accuracy: ± 1.0 % ± 0.6 Ohm capacitance : range: 0.5 pF to 10000 µF resolution: 0.2 pF accuracy: ± 1.5 % ± 0.6 pF inductance: range: 1 µH to 10 H resolution: 0.2 µH accuracy: ± 1.5 % ± 0.6 µH passive component impedance: Re & Im: ± 1.5 % ± 10 LSD magnitude: ± 1.5 % ± 10 LSD phase: ± 5 % measurement sample rate: 0.5 Hz to 2 Hz peak test voltage (across O/C): -1.05 V to 1.05 V peak test current: -3.25 mA to 3.25 mA test frequency accuracy: 1 kHz: ± 0.5 % 14.9254 kHz: ± 0.5 % 200 kHz: ± 0.5 % sine purity: +60 dB 3rd harmonic operating temperature range: 10° C to 40° C / 50° F to 104° F battery operating voltage: 8.5 V to 13 V supplied with removable, gold-plated hook probes fluid measurements with hold function automatic or manual component type automatic or manual test frequency, DC, 1 kHz,15 kHz or 200 kHz enhanced measurement resolution: 0.2 µH, 0.2 pF and 0.2 Ohm easy menu system for user settings enhanced compensation for component parasitics and losses (such as core losses, etc.) automatic or manual power-off

Triplett USB Power Monitor, USB-BUG

$20.99
The USB-Bug will dTest Power (0 to 99.9W), Voltage (3.2 to 30VDC) and Current (0 to 3A) on USB 2.0 and USB 3.0 charging ports with over-voltage, under-voltage and over-current indicators Measure capacity (in mAh) to verify output of portable battery pack Intelligent charging feature automatically selects the safest maximum current for your phone or tablet (charging your phone or tablet up to 50% faster) Dual output for charging two USB devices off of one USB 3.0 port; One port is a specially designed masked port to charge your phone or tablet without any data being transferred

FLUKE Thermocouple Extension Kit Type K, 80PK-EXT

$59.90
Extending and repairing K-type thermocouple wires Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors Maximum continuous exposure temperature: 260ºC 80PK-EXT is compatible with K-type thermometers

VELLEMAN Handheld Metal Detector, CS10MD2

$57.35
indication: audio alert and red LED alert. Audio tone changes as the metal size changes. silent operation: connect the earphones to the detector for silent operation blink: when the unit is working properly, the blink indicator flashes normal and low sensitivity modes low battery indication headphone jack headphone jack: 3.5 mm operating frequency: 50 kHz ± 10% (sine wave) sensitivity: ≥ 1.9" (5 cm) operation current: < 50 mA operation voltage: 7.2 V to 9 V operating temperature: 32°F to 104°F (0°C to +40°C) power supply: 1 x 9 V battery (not incl.) dimensions: 16.9"x 3.2" x 2" (430 x 82 x 51 mm) weight: 12.3 oz. (350 g)

VELLEMAN Digital LCR Meter, LCR40

$79.99
Specification Summary at 20°C (68°F) unless otherwise specified resistance: range: 1Ohm ~ 2MOhm resolution: 0.3Ohm accuracy: ±1.0%±1.2Ohm capacitance : range: 0.5pF ~ 10000µF resolution: 0.2pF accuracy: ±1.5%±1.0pF inductance: range: 1µH ~ 10H resolution: 0.4µH accuracy: ±1.5%±1.6µH peak test voltage across O/C: -1.05V ~ +1.05V peak test current into short circuit: -3.25mA ~ +3.25mA test frequency accuracy: -1.5% ~ +1.5% sine purity: -60dB 3rd harmonic operating temperature range: 10°C ~ 40°C (50F ~ 104F) battery operating voltage: 8.5V ~ 13V Weight per product (nett): 0.098kg (3.5oz) Dimensions per product : 103 x 70 x 20 mm (4.1" x 2.8" x 0.8") automatic component identificationautomatic test frequency selection (DC, 1kHz, 15kHz and200kHz) delayed or instant analysis (for hands free operation) auto power-off probe and test lead compensation interchangeable probe sets automatic ranging and scaling 1% basic accuracy for resistors 1.5% basic accuracy for inductors and capacitors

EXTECH Gas Leak Detector, FG100

$72.99
Fast response detection of gas leakage Detects combustible gases - Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm Highly sensitive detection circuitry Audible and visual alarm Continuous operation up to 4 hours LED indicators for gas leakage and static absorption

TRIPLETT CamView IP Pro-D IP, AHD & Analog Security Test Monitor, 8073

$599.99
IP (H.265) and Analog (AHD 2.0, HD-TVI 3.0, HD-CVI 3.0, and NTSC/PAL) security camera tester Provides an RS485 port for PTZ control of analog PTZ cameras POE for IP cameras or 12VDC to analog cameras Ethernet and network tests; Capture snapshots and video recordings; Generate video test patterns for monitor checking