29 Item(s)

Grid List

ECLIPSE All-in-One Crimper/Stripper Tool, 100-002

This crimper is for generic red, blue & yellow insulated and non-insulated terminals Strips: AWG 10, 12, 14, 16, 18, 20-22 Cut Bolts: 4-40, 6-32, 8-32, 10-24, 10-32 Crimps Insulated: AWG 22-18, 16-14, 12-10 Crimps Non-Insulated: AWG 22-18, 16-14, 12-10

KLEIN All-Purpose Pliers with Crimper, J207-8CR

Strips 10-18 AWG Solid Wire 12-20 AWG Stranded Wire Crimps non-insulated connectors, lugs and terminals

ECLIPSE Pin Extractor .130" OD .110" ID, 902-398

Extracts pins and sockets from commonly used connectors such as AMP 

KLEIN Forged Steel Wire Crimper, Cutter, Stripper, 2005N

Includes a dedicated crimper with a wire stripper and two cutters Strips 10-18 AWG stranded wire Crimps 10-22 AWG insulated and non-insulated terminals and connectors Specially hardened wire cutter in the nose Shear cutter below the rivet cuts copper wire Forged steel for added durability Textured grips for enhanced dexterity and integrated hang holes

KLEIN Ratcheting Crimper, 10-22 AWG - Insulated Terminals, 3005CR

Crimps insulated terminals onto 10-22 AWG stranded copper wire Adjustable compound action design puts more crimping power into each squeeze Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals Built-in ratchet ensures full-cycle crimping for a uniform crimp every time Unique cavity design provides consistent crimp from either side of the tool Dial adjusts the amount of force applied to the crimp Dual-material molded grips provide added comfort

KLEIN Klein-Kurve Heavy-Duty Wire Stripper 8-20 AWG, K12035

Strips 8 to18 AWG Solid and 10 to 20 AWG Stranded wire Large knurled plier tip pulls and twists wire Shear cutting knives for easier cutting of copper wire and larger material such as Romex® cable (all sizes) and other nonmetallic (type NM) sheathed cable Screw shearing for 6-32 and 8-32 screws Wire looping hole Klein-Kurve™ comfort grip handles for reduced hand fatigue Hot riveted joint prevents wobble and separation of the blades over time Textured grips for enhanced dexterity and integrated hang holes Romex® is a registered trademark of Southwire Company

PHILMORE Heavy Duty Cut and Crimp Tool, 63-601

Cuts #10 - 22 AWG Wire Crimps Insulated and Uninsulated terminals

PHILMORE Ratchet Crimp Tool for .062/.093 Contacts, 61-394

Crimps male pins and female sockets For .062" and .093" diameter Works for the 61-xxx series connectors

ECLIPSE Crimper Pliers for Telecom Splices, 100-008

UY, UG & UR connectors Built-in stop to protect against over crimping Side cutter Insulated handles

POLOLU Crimping Tool: 0.1-1.0 mm Capacity, 16-28 AWG, 1928

Crimps both male and female versions of:  Tamiya connector crimp pins & sockets Mini Tamiy connector crimp pins & sockets JST RCY connector crimp pins JR crimp pins Futabe J crimp pins and crimp pins for 0.1" housings For 16-28 AWG wires The crimping die has a width of 7 mm, The tool offers ratcheting action for increased consistency and ease of use

ECLIPSE Ratcheted Crimper for Red/Blue/Yellow Term, 300-002

Ratcheted Crimper for Red/Blue/Yellow Terminals Application: Red, Yellow, Blue Insulated terminals Nylon and Vinyl Crimp Size:  AWG 22-18/ 16-14/ 12-10

ECLIPSE Flat Cable IDC Crimper, 300-011

For crimping IDC-type of connectors onto flat cables Application: DC-type connectors Height: 6mm~27.5mm Width(Max): 55mm Overall Length: 240/9.4

ECLIPSE Heavy Duty Crimping Tool for AWG 8 to 250 MCM, 300-107

Two capacity plates-Aluminum and copper Crimps terminals from AWG 8 to 250 MCM Adjustable w/ knob on top of tool Overall length 22.5"

ECLIPSE Crimper for Wire Ferrules 12-20 AWG, 300-149

For Insulated and Non-Insulated Wire Ferrules and AWG20-12 wire 45° ± 3°

WIHA Soft Grip Ferrule Crimping Pliers, 32604

High Quality forged C70 Tool Steel Induction Hardened Cutting Edges and Jaws Soft Vinyl Grip Handles are Oil and Solvent Resistant For End Ferrule Crimps

ECLIPSE Terminal Crimp Kit with Ratcheting Crimper, 500-037

Ratcheted Crimper Ring insulated Terminal (22-16 AWG & Stud size: #6 ) X 50 pcs Ring insulated Terminal (16-14 AWG & Stud size : #8) X 40 pcs Ring insulated Terminal (12-10 AWG & Stud size : #10) X 20 pcs Butt Splice insulated (22-16 AWG) x 30 pcs Butt Splice insulated (16-14 AWG) x 20 pcs Butt Splice insulated (12-10 AWG) x 15 pcs

PHILMORE High Density D-Sub Crimp Tool, 63-603

Used for high density D-Sub crimp contacts Also works with crimp type locking connectors