Computer Networking & Telecom

At "You-do-it" Electronics Center we have computer networking from patch cables to patch panels, from installation tools to test tools. For the professional or do-it-yourselfer. Call or email us if you don't see what you're looking for.
Items 1 to 36 of 478 total

Grid List

KLEIN Digital Circuit Breaker Finder with GFCI Outlet Tester, ET310

$49.97
Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker Receiver delivers clear visual and audible indications when the correct breaker has been located Operates on 90-120V AC circuits Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411) Receiver powers off automatically after approximately three minutes of non-use to conserve battery life Transmitter is powered by the circuit when connected to the electrical outlet or fixture Low battery indicator Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery Built to withstand a 6.6-Foot (2 m) drop CAT II 120V safety rating Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver)

KLEIN Electrical Test Kit, 69149

$63.90
The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects MM300 tests continuity with visual and audible continuity indicators Test leads included for MM300; batteries included for NCVT-1 and MM300

KLEIN Scout Pro 3 Tester Starter Kit, VDV501-851

$89.97
Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results Measure cable length (up to 2,000 feet) Test for Open, Short, Miswire or Split-Pair faults Backlit LCD screen displays cable length, wiremap, cable ID and test results Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Hub blink mode to identify port location on a hub or a switch LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote Auto Power-off feature to conserve battery life (9V included) Kit includes: Scout® Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-connector locator remotes, (1) coax F-connector, manual and 9V battery

PLATINUM RJ45 Termination Crimp Tool for all EZ, EZEX and standard plugs, 12520C

$72.96
Crimps both EZ-RJ45 and ezEX Platinum Tools connectors Crimps standard pass-through and standard RJ45 connectors Connector locking mechanism for audible “click” when the connector is inserted into the tool Ergonomic grip for comfort during extended use Captive thumb screw for adjustment of the crimping plate For both UTP and STP connectors Cutting and stripping blades in handle of tool for Cat5e/6 cable

KLEIN Tone & Probe PRO Kit, VDV500-820

$79.97
Includes a professional grade tone generator and tracing probe for non-active wiring Toner-Pro features 5 distinct tone cadences Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs Probe-Pro features 3.5 mm headphone jack for noisy environments (headphones not included) Responsive probe with durable non-metallic, replaceable conductive tip (VDV999-068) - sold separately Work light on probe tip for use in dark spaces Terminal block on probe to confirm the toned pair Each tool includes 4X AAA batteries Custom, padded, divided, zipper pouch for convenient storage (VDV770-500) included with kit

KLEIN Toner-PRO Tone Generator, VDV500-063

$55.99
Professional grade tone generator for non-active wiring For use with Probe-Pro Tracing Probe (VDV500-123) required (sold separately) Five distinct tone cadences Rugged Angled Bed of Nails (ABN) clips securely attach to wires RJ11 plug easily connects to telephone or RJ45 data jacks to tone individual conductors or wire pairs Tests for continuity and polarity with response displayed on clearly labeled, easy-to-read LEDs Auto Power-Off and Low Battery Indicator Loop for a lanyard (4) AAA Batteries included

INTELLINET Universal Modular Plug Crimping Tool, 211048

$19.90
Crimps RJ45, RJ12 and RJ11 modular plugs Cuts and strips both round and flat cable

KLEIN Punchdown Screwdriver Multi-Tool, VDV001-081

$27.99
Terminate and cut wire in one step with 110/66 combination cut-type punchdown blade with precision ground cutting edge. Non-impact wire termination. Machine-tooled steel bits for superior strength. Heavy-duty blade barrel provides storage for bits. Bayonet-style (twist & lock) socket accepts most manufacturers' punchdown blades. Cushion-Grip handle for greater torque and enhanced comfort. Tip-Ident® for quick identification of tool. Two Phillips screwdriver tips: #1 and #2. Two slotted screwdriver tips: 3/16'' (5 mm) and 1/4'' (6 mm). Two nut drivers: 1/4'' (6 mm) and 3/8'' (10 mm). One hex key: 3/8''

KLEIN Circuit Breaker Finder Accessory Kit, 69411

$19.97
For use with ET300 and ET310 Digital Circuit Breaker Finder Light socket adapter for finding the correct circuit of a lighting fixture Alligator clip adapter enables use on bare wires Includes standard 3-prong to 2-prong grounding adapter

GREENLEE Bix Blade for Punchdown Tool, PA4574

$28.90
Cushion grip, molded to the shape of your hand, for comfort and a sure, non-slip hold Increased HI/LO impact force to meet demands of new cable types and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N) For 28-22 AWG (0.08 - 0.34mm2), solid or stranded wire Uses twist-and-lock style blades Cushioned heel for comfort in the palm of your hand New latch cover blade storage area in end of handle Lanyard holes in end

KLEIN Scout Pro 3 Tester with Locator Remote Kit, VDV501-852

$189.99
Cable tester for voice (RJ11/12), data (RJ45) and video (F-connector) coax connections Self-storing Test + Map™ Remote (#1) tests, maps and IDs a cable run in a single step Power over Ethernet Tester that displays PoE wire and Voltage Trace cables, wire pairs and individual conductor wires with a tone generator Measures cable length up to 2,000 feet (610 m) Identify multiple cable runs with location-mapping remotes Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Identify 18 RJ45 and 18 F-connector drop locations with large easy-to-read numbers Detect, identify and test Power over Ethernet (PoE) Backlit LCD screen displays cable length, wiremap, cable ID and test results Hub blink mode to identify port location on a hub or a switch Includes 1 Self-storing Test + Map Remote (31), 18 RJ45 LAN locator remotes, 18 F coax locator remotes, 2 female-to-female coax adapters and a 9V battery Includes a 9V battery and convenient carrying case

MANHATTAN Hi-Speed USB C Male to USB A Male Cable 6ft, 354929

$12.90
USB 2.0 Type-A male to USB-C male Connects a USB-C device to a Hi-Speed USB hub or computer Supports speeds of up to 480 Mbps and fast charging of up to 3.0 A

MANHATTAN Hi-Speed USB C Male to USB C Female Cable 1.5ft, 355230

$14.90
Extends port access for easier device management or adds length to a shorter cable USB-C male to USB-C female Connects and extends a USB 3.1 Gen 2 Type-C device cable to a Gen 2 Type-C port

TRIPPLITE Universal Reversible USB 2.0 Hi-Speed Cable, UR022-006-RA

$5.90
6ft, USB 2.0 Right / Left Angle A-Male to B-Male, with Universal / Reversible "A" connector USB 2.0 compliant, to 480Mbps transfer rates Backward compatible with previous USB generations Gold plated contacts and molded ends provide a lifetime of use 28AWG Data Pair, 24AWG Power pair

MANHATTAN Hi-Speed USB C Male to USB A Male Cable 10ft, 354936

$14.90
USB 2.0 Type-A male to USB-C male Connects a USB-C device to a Hi-Speed USB hub or computer Supports speeds of up to 480 Mbps and fast charging of up to 3.0 A

MANHATTAN USB 2.0 Extension Cable 15ft, 340502

$14.90
USB Standard-A male to USB Standard-A female Extends a USB cable to a maximum of 5 m (16 ft.) Speeds of up to 480 Mbps Hi-Speed USB for ultra-fast data transfer rates with zero data degradation

TRIPPLITE USB-C Active Extension Cable - USB-C to USB-A (M/F), USB 3.2 Gen 2, Data Only, 5 m (16.4 f, U330-05M-C2A-G2

$39.90
Adds 5 meters to your existing USB connection to provide flexibility in placing devices Connects existing USB-A peripherals to newer laptops or tablets with USB-C ports Supports USB 3.2 Gen 2 speeds up to 10 Gbps to ensure fast data transfers Provides up to 900mA of power to connected device without need for external power Plug-and-play operation with no software required for easy, immediate installation

VANCO USB Line Extender Extends the Distance to Any USB Device Up to 60 m (196 ft.), 280339

$109.00
Allows USB 2.0 signals to be transmitted over a single Cat5e/6 cable Provides additional power to multiple USB 2.0 compatible devices Extends distance of up to (4 qty) USB 2.0 devices from a single USB device Transfer speeds of up to 480Mbps Ideal for use with USB 2.0 keyboard and mouse devices Transmission Range: Extends up to 197ft/60m Transmitter Connection: USB A Male – RJ45 Receiver Connection: USB A Female – RJ45 5V Power Supply Included

MANHATTAN SuperSpeed+ USB 3.1 C Male to VGA Female Converter with Power Delivery Port, 153430

$24.99
Supports resolutions up to 4K@60Hz following DisplayPort 1.2 standards Supports Power Delivery (PD) up to 60 W (20 V / 3 A) Thunderbolt 3 compatible Compliant with DisplayPort 1.2 Alternate Mode (DP Alt Mode) Plug and play; requires no external power supply Fully shielded to reduce EMI and other interference sources Molded PVC boot and strain relief
New INTELLINET CAT6a S/FTP Patch Cable 5ft Black

INTELLINET CAT6a S/FTP Patch Cable 5ft Black, 742191

$11.99
Copper, 26 AWG, RJ45, 50 Micron Connectors Augmented Category 6 (Cat6a) Screened fully-shielded twisted pair cable PVC cable jacket for flexibility and durability

MANHATTAN USB Male A - Female A Extension Cable 16ft, 150712

$34.90
A Male / A Female, 5 m (16 ft.) Extends and boosts the signal to any USB device – supports data transfer speeds up to 5 Gbps Built-in repeater helps maintain USB 3.0 signal quality, electrical and timing specifications Extends the connections to enclosures and other peripherals up to 5 m (16 ft.) without signal loss

MANHATTAN USB 2.0 Extension Cable 10ft, 340496

$9.90
USB Standard-A male to USB Standard-A female Extends a USB cable to a maximum of 5 m (16 ft.) Speeds of up to 480 Mbps Hi-Speed USB for ultra-fast data transfer rates with zero data degradation

MANHATTAN SuperSpeed USB-C to RJ45 Gigabit Adapter with Power Delivery Port, 153454

$38.69
Features: Adds a 1GBASE-T Ethernet port to any USB-C-enabled device Supports Power Delivery up to 60 W (20 V / 3 A) Supports full-duplex flow control Supports jumbo frames up to 9K bytes Thunderbolt 3 compatible Plug and play; requires no external power supply Fully shielded to reduce EMI and other interference sources Molded PVC boot and strain relief